Abstract:Purpose As lubricating oils are used, their performance deteriorates and they become contaminated. The purpose of this paper is to investigate the lubrication performance of reclaimed 5 W-30 a fully synthetic used engine oil (UEO) with wear tests after refining it from a solvent-based extraction method using solvent (1-PrOH) and adsorbent materials such as cement, celite and deep eutectic solvent (DES). Design/methodology/approach The treated oil mixtures were prepared by blending engine oils with various adsorbent materials at 5% (w/w) in organic 1-PrOH solvent at a UEO: solvent ratio of 1:2 (w/w). The measurement of kinematic viscosity, density, the total acid number (TAN) and elemental analysis of oil samples was done by the ASTM standards D445/D446, D4052, D974 and D6595, respectively. Adsorbents and treated oil samples characterized by SEM-EDX, FTIR and UV analysis, respectively. Meanwhile, lubricating performance in tribological applications was evaluated through the wear test device using a rotating steel alloy 1.2379 cylinder and a stationary 1.2738 pin under 20, 40 and 80 kg load conditions. Worn surface analysis was done with SEM and 2.5D images. Findings It was found that when using the combination of cement and celite as an adsorbent in the reclamation of used engine oil demonstrated better lubricant properties. The properties of used engine oil were improved in the manner of kinematic viscosity of 32.55 from 68.49 mm 2 /s, VI (Viscosity index) value of 154 from 130, TAN of 3.18 from 4.35 (mgKOH/g) and Fe content of 11 from 32 mg/L. The anti-wear properties of used engine oil improved by at least 32% when 5% cement and 5% celite adsorbent materials were used together. Research limitations/implications The paper is based on findings from a fully synthetic 5 W-30 A5 multi-grade engine lubrication oil collected after driving approximately 12.000 km. Practical implications The results are significant, as they suggest practical regeneration of used engine oil is achievable. Additionally, blending fresh oil with reclaimed used engine oil in a 1:1 ratio reduced wear loss by over 10% compared to fresh oil. Social implications Reusing used engine oils can reduce their environmental impact and bring economic benefits. Originality/value This study showed that the properties of UEO can be enhanced using the solvent extraction-adsorption method. Furthermore, the study provided valuable insights into the metal concentrations in engine oil samples and their impact on lubrication performance. The order of the number of the grooves quantity and the possibility of the observed scuffing region trend relative to the samples was UEO > 5W-30 fresh oil > Treated oil sample with the adsorbent cement and celite together. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-06-2024-0209/

Performance Study of Chlorophyll-Extracting Waste Oil Used As Rubber Operating Oil

Achieving the Good Thermal-Stability and Lubricity Via a Dihydroxy Biolubricant from the Agro-Waste of Codonopsis Pilosula

Metathetic degradation of waste natural rubbers for potential reutilization

Recycling waste engine oil as a viscosity reducer for asphalt rubber: an insight from molecular dynamics simulations and laboratory tests

Diester Derivatives from Chemically Modified Waste Cooking Oil As Substitute for Petroleum Based Lubricating Oils

The Synergistic Effect of Waste Engine Oil and Organic Montmorillonite on Properties of Bitumen: Conventional, High-Temperature Rheological, and Self-Healing

Tribological performance of used engine oil treated with cement and celite adsorbents by solvent extraction-adsorption method

Structural Modification of Waste Cooking Oil Methyl Esters As Cleaner Plasticizer to Substitute Toxic Dioctyl Phthalate

Enhanced physicomechanical performance of nitrile rubber composites by utilizing eco‐friendly natural oil as a plasticizer

Selective Decomposition of Waste Rubber from the Shoe Industry by the Combination of Thermal Process and Mechanical Grinding

Insight into water-enhanced CO2 extraction in the treatment of oily sludge

Optimizing parameters for the preparation of low viscosity rubber asphalt incorporating waste engine oil using response surface methodology

Waste Cooking Oil-Modified Epoxy Asphalt Rubber Binders with Improved Compatibility and Extended Allowable Construction Time

Thermolysis of scrap tire and rubber in sub/super-critical water.

PRELIMINARY STUDY ON PROCESSING OIL-BASED CALCIUM CARBONATE MUD(OBCCM) INTO RUBBER FILLERS

Compound reutilization of waste cooking oil and waste engine oil as asphalt rejuvenator: performance evaluation and application

Upgrading the Lubricity of Bio-Oil Via Homogeneous Catalytic Esterification under Vacuum Distillation Conditions

Co-pyrolytic performances, mechanisms, gases, oils, and chars of textile dyeing sludge and waste shared bike tires under varying conditions

Rheological properties and microscopic characteristics of rejuvenated asphalt using different components from waste cooking oil

Investigation on the lubrication component and mechanism for a biolubricant isolated from the agro-waste resource of Codonopsis pilosula

Understanding H 2 O 2 -Induced Thermo-Oxidative Reclamation of Vulcanized Styrene Butadiene Rubber at Low Temperatures