Abstract:Due to the excellent thermal propulsion performances of detonation, it has been applied for the purpose of aerospace propulsion devices, e.g., pulse detonation engines (PDEs), rotating detonation engines (RDEs), and oblique detonation wave engines (ODWEs). However, it remains challenging for developing those new-concept propulsion devices, mainly because it is a formidable task to establish a steady and self-sustained detonation in the hypersonic flow and combustible mixture. One of the fundamental problems is to understand the interaction of diffractions and the detonation waves within the engines. In this study, perforated plates with various blockage ratios are seated at the beginning of the detonation propagation to explore the diffractions that generated from the plates on the detonation propagation mechanism. Two explosive mixtures of C2H2 + 5N2O and C2H2 + 2.5O2 + 70% Ar are studied to illustrate the difference in propagation velocity behavior of detonation after it suffers from large-scale diffractions. The results show that diffractions have less effect on the propagation of highly unstable mixture, and the effect becomes obvious as BR increases to 0.962; this phenomenon occurs because detonation has an irregular cellular pattern and sub-structures are characterized by highly unstable detonation, in which the detonation instabilities are amplified by the large perturbations of obstacles, leading to an augment in forming more cellular cells of detonation in its front that cover the weakening effects from diffractions. In contrast, the diffractions significantly affect the stable mixture, manifested by a remarkable increase of the critical pressure for a self-sustained detonation downstream of the obstacle with the augment of blockage ratio; this phenomenon can be attributed to the diffractions being distributed along the curvature over the detonation surface, thereby causing more excessive curvature of the entire detonation front, which in turn exacerbates the failure of detonation.

Detonation Wave Propagation in Micro-Scale Groove Charges

Diameter Effect on the Propagation of Curved Detonation Waves in Micro-Channel Charges Within a Strong Confinement

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Geometric Scaling for a Detonation Wave Governed by a Pressure-Dependent Reaction Rate and Yielding Confinement

Numerical Simulation Investigation on Propagation of Detonation Wave for Small Charge Diameter

Groove Charge of a Rigid Multi-Point Initiation Explosive Network

Experimental study on the propagation characteristics of detonation wave in annular channels with convergent cross-sections

Meshfree particle simulation of the detonation process for high explosives in shaped charge unlined cavity configurations

Effect of Charge Density and Size on Detonation Pressure and Detonation Velocity of RDX-based Aluminized Explosive

A Flexible MEMS Ionization-Conducted Probe Sensor for Evaluating Detonation Velocity of Microcharges

Study on Effects of Confinement Condition and Charge Diameter on Detonation Velocity

Blast wave characteristics of multi-layer composite charge: Theoretical analysis, numerical simulation, and experimental validation

Effects of Equivalence Ratio and Gap Size on the Propagation Behavior of Detonations

Study on Blast-Induced Vibration of Single-Hole Cylindrical Charge

Low speed impact simulation of explosive charge based on three-dimensional numerical manifold method

Computer Simulation of Shaped Charge Detonation Using Meshless Particle Method

Velocity Behavior Downstream of Perforated Plates with Large Blockage Ratio for Unstable and Stable Detonations

Microjet Formation from the Grooved Surface of Aluminum under Shock Waves with Different Pulse Durations

Explosion wave and explosion fracture characteristics of cylindrical charges

Research on the initiation and wavefront evolution of diverging cylindrical detonations of acetylene and oxygen mixtures

Numerical Simulation of Detonation and Multi-Material Interface Tracking