Abstract:When ultrasound propagates in a liquid alloy, nonlinear effect takes place such as cavitation effect and acoustic streaming, which accelerates the solute and thermal transportation during alloy solidification, and consequently, improves the solidification microstructures and mechanical properties of the metallic alloy. Therefore, it is significant to investigate the ultrasound propagation characteristics in liquid. Here, by choosing water as a model transparent material, the acoustic fields and flow fields induced by 20 and 490 kHz ultrasounds are investigated by numerical simulation, and the effects of frequency and ultrasonic horn radius are studied. Firstly, the simulation results demonstrate that the sound pressure under 20 kHz ultrasound decreases obviously along the ultrasonic propagation direction, and the maximum of sound pressure value is equal to the initial pressure. In this case, the cavitation effect only occurs in the region close to the ultrasonic horn. By contrast, when the ultrasonic frequency increases to 490 kHz, the sound pressure is higher than that of 20 kHz ultrasound, and displays periodical vibration characteristic along the wave propagation direction. The cavitation volume correspondingly expands to a large extent with a regular striped distribution. It can also be found that increasing the ultrasonic horn radius under 20 and 490 kHz ultrasounds can effectively promote the sound pressure level in water, and hence leads to the remarkable enlargement of cavitation volume. Secondly, the calculated results of flow field indicate that the streamlines in water are similar under the two ultrasounds with different frequencies. A jet produced by the center of horn spreads down and divergences to both sides after reaching the bottom. For both frequencies as the horn radius increases, the radius of jet increases and the average velocity in water first increases and then decreases, whose maximum value appears when the horn radius is 40 mm. Meanwhile, the average velocity under 20 kHz ultrasound is larger than that under 490 kHz ultrasound for each horn radius. Finally, particle image velocimetry method is employed to measure the velocity field in water. Both the positions of eddy and the velocity distribution are the same as the simulation results, which verifies the reliability of the present theoretical calculation model. The scenario in this work is analogous to the acoustic field and the flow field in liquid alloy, which is beneficial for the design of parameter optimization during ultrasonic processing in alloy solidification.

Numerical Simulation of Ultrasonic Field Within the Large-Scale Al Alloy Melts Treated by Scalable Sonotrodes

Numerical Simulation of Physical Field During Different Ultrasonic Power Assisted Casting of 7085 Aluminum Alloy

Scalable ultrasonic casting of large-scale 2219AA Al alloys: Experiment and simulation

The Cavitation Erosion of Ultrasonic Sonotrode During Large-Scale Metallic Casting: Experiment and Simulation.

Acoustic Field and Convection Pattern Within Liquid Material During Ultrasonic Processing

Progress of Cavitation and Acoustic Streaming Dynamics of Liquid Materials Within Ultrasonic Field

Effect of Multi-Source Ultrasonic on the Microstructure and Mechanical Properties of a Large Scale 2219 Al Alloy Ingot During Casting

Numerical Simulation of Ultrasonic Cavitation in Zn-Al Alloy and Study on Its Grain Refinement and Strengthening Mechanism

Numerical Simulation of the Stirring Action of Ultrasound in the Process of Semi-Continuous Casting Aluminum Alloy

Ultrasonic Solidification Mechanism and Optimized Application Performances of Ternary Mg71.5Zn26.1Y2.4 Alloy

Three Orthogonally Arranged Ultrasounds Modulate Solidification Microstructures and Mechanical Properties for AZ91 Magnesium Alloy

Ultrasonic Cavitation and Acoustic Streaming Effects During Liquid Phase Separation and Dynamic Solidification of Ternary Al–Sn–Si Immiscible Alloy

Scalable Ultrasound-Assisted Casting of Ultra-large 2219 Al Alloy Ingots

A Computational and Experimental Study of Ultrasonicated Phase Separation Process for Liquid Al–Bi Immiscible Alloy

Numerical Simulation and Casting Experiments on Particle Dispersion in 2219 Al Alloy by Introducing Al–5Ti–1B and Ultrasonic Treatment

Microstructure Evolution and Mechanical Property of Quaternary Cu-7%Al-4%Ni-2.5%Mn Alloy Solidified Within Ultrasonic Field

Improved Mechanical Performances of Dynamically Solidified Mg97.7Y1.4Al0.9 Alloy by Three Dimensional Ultrasounds

Grain Refinement of A Large-Scale Al Alloy Casting by Introducing the Multiple Ultrasonic Generators During Solidification

Numerical Simulation of Acoustic Pressure Field for Ultrasonic Grain Refinement of AZ80 Magnesium Alloy

Numerical Simulation of Ultrasonic Propagation in Magnesium Alloy Melt

Numerical Simulation of Filling and Solidification of Large Complex ZTC4 Alloy Castings