Thin, Flexible Sensors and Actuators As 'instrumented' Surgical Sutures for Targeted Wound Monitoring and Therapy.
Dae-Hyeong Kim,Shuodao Wang,Hohyun Keum,Roozbeh Ghaffari,Yun-Soung Kim,Hu Tao,Bruce Panilaitis,Ming Li,Zhan Kang,Fiorenzo Omenetto,Yonggang Huang,John A. Rogers
DOI: https://doi.org/10.1002/smll.201200933
IF: 13.3
2012-01-01
Small
Abstract:SmallVolume 8, Issue 21 p. 3263-3268 Communication Thin, Flexible Sensors and Actuators as 'Instrumented' Surgical Sutures for Targeted Wound Monitoring and Therapy Dae-Hyeong Kim, Dae-Hyeong Kim School of Chemical and Biological Engineering, WCU Program of Chemical Convergence for Energy and Environment, Institute of Chemical Processes, Inter-University Semiconductor Research Center, Seoul National University, Seoul 151-741, Republic of KoreaSearch for more papers by this authorShuodao Wang, Shuodao Wang Department of Materials Science and Engineering, Beckman Institute for Advanced Science and Technology and Frederick Seitz Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USASearch for more papers by this authorHohyun Keum, Hohyun Keum Department of Materials Science and Engineering, Beckman Institute for Advanced Science and Technology and Frederick Seitz Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USASearch for more papers by this authorRoozbeh Ghaffari, Roozbeh Ghaffari MC10 Inc., 36 Cameron Avenue, Cambridge, MA 02140, USASearch for more papers by this authorYun-Soung Kim, Yun-Soung Kim Department of Materials Science and Engineering, Beckman Institute for Advanced Science and Technology and Frederick Seitz Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USASearch for more papers by this authorHu Tao, Hu Tao Department of Biomedical Engineering, Tufts University, Medford, MA 02155, USASearch for more papers by this authorBruce Panilaitis, Bruce Panilaitis Department of Biomedical Engineering, Tufts University, Medford, MA 02155, USASearch for more papers by this authorMing Li, Ming Li State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, ChinaSearch for more papers by this authorZhan Kang, Zhan Kang State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, ChinaSearch for more papers by this authorFiorenzo Omenetto, Fiorenzo Omenetto Department of Biomedical Engineering, Tufts University, Medford, MA 02155, USASearch for more papers by this authorYonggang Huang, Yonggang Huang Department of Mechanical Engineering and Department of Civil and Environmental Engineering, Northwestern University, Evanston, IL 60208, USASearch for more papers by this authorJohn A. Rogers, Corresponding Author John A. Rogers [email protected] Department of Materials Science and Engineering, Beckman Institute for Advanced Science and Technology and Frederick Seitz Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USADepartment of Materials Science and Engineering, Beckman Institute for Advanced Science and Technology and Frederick Seitz Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA.Search for more papers by this author Dae-Hyeong Kim, Dae-Hyeong Kim School of Chemical and Biological Engineering, WCU Program of Chemical Convergence for Energy and Environment, Institute of Chemical Processes, Inter-University Semiconductor Research Center, Seoul National University, Seoul 151-741, Republic of KoreaSearch for more papers by this authorShuodao Wang, Shuodao Wang Department of Materials Science and Engineering, Beckman Institute for Advanced Science and Technology and Frederick Seitz Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USASearch for more papers by this authorHohyun Keum, Hohyun Keum Department of Materials Science and Engineering, Beckman Institute for Advanced Science and Technology and Frederick Seitz Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USASearch for more papers by this authorRoozbeh Ghaffari, Roozbeh Ghaffari MC10 Inc., 36 Cameron Avenue, Cambridge, MA 02140, USASearch for more papers by this authorYun-Soung Kim, Yun-Soung Kim Department of Materials Science and Engineering, Beckman Institute for Advanced Science and Technology and Frederick Seitz Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USASearch for more papers by this authorHu Tao, Hu Tao Department of Biomedical Engineering, Tufts University, Medford, MA 02155, USASearch for more papers by this authorBruce Panilaitis, Bruce Panilaitis Department of Biomedical Engineering, Tufts University, Medford, MA 02155, USASearch for more papers by this authorMing Li, Ming Li State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, ChinaSearch for more papers by this authorZhan Kang, Zhan Kang State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, ChinaSearch for more papers by this authorFiorenzo Omenetto, Fiorenzo Omenetto Department of Biomedical Engineering, Tufts University, Medford, MA 02155, USASearch for more papers by this authorYonggang Huang, Yonggang Huang Department of Mechanical Engineering and Department of Civil and Environmental Engineering, Northwestern University, Evanston, IL 60208, USASearch for more papers by this authorJohn A. Rogers, Corresponding Author John A. Rogers [email protected] Department of Materials Science and Engineering, Beckman Institute for Advanced Science and Technology and Frederick Seitz Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USADepartment of Materials Science and Engineering, Beckman Institute for Advanced Science and Technology and Frederick Seitz Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA.Search for more papers by this author First published: 14 August 2012 https://doi.org/10.1002/smll.201200933Citations: 129Read the full textAboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onEmailFacebookTwitterLinkedInRedditWechat Graphical Abstract Proper healing of incised skin is critical to the natural processes of tissue repair. Concepts in flexible silicon electronics enable integration of actuators, sensors and a variety of semiconductor devices onto thin strips of plastic or biopolymers, to yield 'instrumented' suture threads for monitoring and accelerating the wound healing in this context. Bifacial systems of this type demonstrate various classes of functionality, in live animal models. Detailed modelling of the mechanics reveals stress and strain distributions in such applications, to support design strategies for robust operation. References 1 D. L. Steed, Plast. Reconstr. Surg. 2006, 117, 143S. 2 S. Rothenburger, D. Spangler, S. Bhende, D. Burkley, Surgical Infections 2002, 3, s79. 3 A. Lendlein, R. Langer, Science 2002, 296, 1673. 4 T. Sekitani, U. Zschieschang, H. Klauk, T. Someya, Nat. Mater. 2010, 9, 1015. 5 M. H. Chiu, W. L. Cheng, G. Muthuraman, C. T. Hsu, H. H. Chung, J. M. Zen, Biosens. Bioelectron. 2009, 24, 3008. 6 J. A. Rogers, M. G. Lagally, R. G. Nuzzo, Nature 2011, 477, 45. 7 J. Viventi, D. H. Kim, L. Vigeland, E. S. Frechette, J. A. Blanco, Y. S. Kim, A. E. Avrin, V. R. Tiruvadi, S. W. Hwang, A. C. Vanleer, D. F. Wulsin, K. Davis, C. E. Gelber, L. Palmer, J. Van der Spiegel, J. Wu, J. L. Xiao, Y. G. Huang, D. Contreras, J. A. Rogers, B. Litt, Nat. Neurosci. 2011, 14, 1599. 8 D. Haemmerich, P. F. Laeseke, Int. J. Hyperther. 2005, 21, 755. 9 J. S. Petrofsky, D. Lawson, H. J. Suh, C. Rossi, K. Zapata, E. Broadwell, L. Littleton, Diabetes. Technol. The. 2007, 9, 535. 10 C. J. Gannon, P. Cherukuri, B. I. Yakobson, L. Cognet, J. S. Kanzius, C. Kittrell, R. B. Weisman, M. Pasquali, H. K. Schmidt, R. E. Smalley, S. A. Curley, Cancer 2007, 110, 2654. 11 S. W. Choi, Y. Zhang, Y. N. Xia, Angew. Chem., Int. Ed. 2010, 49, 7904. 12 O. Gonzalez, J. H. Maddocks, Proc. Natl. Acad. Sci. USA 1999, 96, 4769. 13 M. J. Kluger, Proc. Nutr. Soc. 1989, 48, 337. 14 S. K. Park, Y. H. Kim, J. I. Han, D. G. Moon, W. K. Kim, Thin Solid Films 2003, 429, 231. 15 W. Y. Chang, T. H. Fang, S. H. Yeh, Y. C. Lin, Sensors 2009, 9, 1188. 16 F. Iacopi, Y. Travaly, M. Van Hove, A. M. Jonas, J. M. Molina-Aldareguia, M. R. Elizalde, I. Ocana, J. Mater. Res. 2006, 21, 3161. 17 J. Lee, J. A. Wu, M. X. Shi, J. Yoon, S. I. Park, M. Li, Z. J. Liu, Y. G. Huang, J. A. Rogers, Adv. Mater. 2011, 23, 986. 18 S. P. Lacour, S. Wagner, Z. Y. Huang, Z. Suo, Appl. Phys. Lett. 2003, 82, 2404. 19 J. Brelle, A. Blatter, R. Ziegenhagen, Platinum Met. Rev. 2009, 53, 189. 20 F. H. Gojny, M. H. G. Wichmann, U. Kopke, B. Fiedler, K. Schulte, Compos. Sci. Technol. 2004, 64, 2363. 21 E. Tschegg, K. Humer, H. W. Weber, Cryogenics 1991, 31, 878. 22 L. U. Devi, S. S. Bhagawan, S. Thomas, J. Appl. Polym. Sci. 1997, 64, 1739. 23 L. P. A. Burgess, G. V. Morin, M. Rand, J. Vossoughi, J. O. Hollinger, Arch. Otolaryngol. Head. Neck. Surg. 1990, 116, 798. Citing Literature Volume8, Issue21November 5, 2012Pages 3263-3268 ReferencesRelatedInformation