Abstract:In vitro vascular models, primarily made of silicone, have been utilized for decades for studying hemodynamics and supporting the development of implants for catheter-based treatments of diseases such as stenoses and aneurysms. Hydrogels have emerged as prominent materials in tissue-engineering applications, offering distinct advantages over silicone models for fabricating vascular models owing to their viscoelasticity, low friction, and tunable mechanical properties. Our study evaluated the feasibility of fabricating thin-wall, anatomical vessel models made of polyvinyl alcohol hydrogel (PVA-H) based on a patient-specific carotid artery bifurcation using a combination of 3D printing and molding technologies. The model's geometry, elastic modulus, volumetric compliance, and diameter distensibility were characterized experimentally and numerically simulated. Moreover, a comparison with silicone models with the same anatomy was performed. A PVA-H vessel model was integrated into a mock circulatory loop for a preliminary ultrasound-based assessment of fluid dynamics. The vascular model's geometry was successfully replicated, and the elastic moduli amounted to 0.31 ± 0.007 MPa and 0.29 ± 0.007 MPa for PVA-H and silicone, respectively. Both materials exhibited nearly identical volumetric compliance (0.346 and 0.342% mmHg-1), which was higher compared to numerical simulation (0.248 and 0.290% mmHg-1). The diameter distensibility ranged from 0.09 to 0.20% mmHg-1 in the experiments and between 0.10 and 0.18% mmHg-1 in the numerical model at different positions along the vessel model, highlighting the influence of vessel geometry on local deformation. In conclusion, our study presents a method and provides insights into the manufacturing and mechanical characterization of hydrogel-based thin-wall vessel models, potentially allowing for a combination of fluid dynamics and tissue engineering studies in future cardio- and neurovascular research.

Artificial Vascular with Pressure‐Responsive Property based on Deformable Microfluidic Channels

Fabrication of Hydrogel Tubes with Vascular Mimicked Stiffness for Construction of in Vitro Vascular Models

Design, fabrication and application of bioengineering vascular networks based on microfluidic strategies

Fabrication, characterization and numerical validation of a novel thin-wall hydrogel vessel model for cardiovascular research based on a patient-specific stenotic carotid artery bifurcation

Microvasculature‐on‐a‐Post Chip That Recapitulates Prothrombotic Vascular Geometries and 3D Flow Disturbance

Microfluidic Chips for the Endothelial Biomechanics and Mechanobiology of the Vascular System

Sequentially Suspended 3D Bioprinting of Multiple-Layered Vascular Models with Tunable Geometries Forin Vitromodeling of Arterial Disorders Initiation.

Microfluidic-to-macrofluidic: A simple in vitro model of atherosclerosis induced by fluidic stimulation

Microfluidic-Based 3D Engineered Microvascular Networks and Their Applications in Vascularized Microtumor Models

Modular 3D In Vitro Artery-Mimicking Multichannel System for Recapitulating Vascular Stenosis and Inflammation

Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique

Microfluidic bioprinting of tough hydrogel-based vascular conduits for functional blood vessels

A Novel Method for Generating 3D Constructs with Branched Vascular Networks Using Multi-Materials Bioprinting and Direct Surgical Anastomosis

3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels

Acoustofluidic Engineering Functional Vessel-on-a-Chip

Study on Performance Simulation of Vascular-like Flow Channel Model Based on TPMS Structure

Cellular Fluidic-Based Vascular Networks for Tissue Engineering

Novel Microfluidic Perfusion Bioreactor for Vascularized Organ-on-a-Chip

Multilayered Modular Microfluidic Platform for 3D Vascularized Organ-on-a-chip Application

Elastomeric free-form blood vessels for interconnecting organs on chip systems.

3D-Bioprinted Vascular Scaffold with Tunable Mechanical Properties for Simulating and Promoting Neo-Vascularization