Abstract:In hydraulic fracturing, fracturing fluids are used to create fractures in a hydrocarbon reservoir throughout transported proppant into the fractures. The application of many fields proves that conventional fracturing fluid has the disadvantages of residue(s), which causes serious clogging of the reservoir's formations and, thus, leads to reduce the permeability in these hydrocarbon reservoirs. The development of clean (and cost-effective) fracturing fluid is a main driver of the hydraulic fracturing process. Presently, viscoelastic surfactant (VES)-fluid is one of the most widely used fracturing fluids in the hydraulic fracturing development of unconventional reservoirs, due to its non-residue(s) characteristics. However, conventional single-chain VES-fluid has a low temperature and shear resistance. In this study, two modified VES-fluid are developed as new thickening fracturing fluids, which consist of more single-chain coupled by hydrotropes (i.e., ionic organic salts) through non-covalent interaction. This new development is achieved by the formulation of mixing long chain cationic surfactant cetyltrimethylammonium bromide (CTAB) with organic acids, which are citric acid (CA) and maleic acid (MA) at a molar ratio of (3:1) and (2:1), respectively. As an innovative approach CTAB and CA are combined to obtain a solution (i.e., CTAB-based VES-fluid) with optimal properties for fracturing and this behaviour of the CTAB-based VES-fluid is experimentally corroborated. A rheometer was used to evaluate the visco-elasticity and shear rate & temperature resistance, while sand-carrying suspension capability was investigated by measuring the settling velocity of the transported proppant in the fluid. Moreover, the gel breaking capability was investigated by determining the viscosity of broken VES-fluid after mixing with ethanol, and the degree of core damage (i.e., permeability performance) caused by VES-fluid was evaluated while using core-flooding test. The experimental results show that, at pH-value ( 6.17 ), 30 (mM) VES-fluid (i.e., CTAB-CA) possesses the highest visco-elasticity as the apparent viscosity at zero shear-rate reached nearly to 10 6 (mPa·s). Moreover, the apparent viscosity of the 30 (mM) CTAB-CA VES-fluid remains 60 (mPa·s) at (90 ∘ C) and 170 (s - 1 ) after shearing for 2-h, indicating that CTAB-CA fluid has excellent temperature and shear resistance. Furthermore, excellent sand suspension and gel breaking ability of 30 (mM) CTAB-CA VES-fluid at 90 ( ∘ C) was shown; as the sand suspension velocity is 1.67 (mm/s) and complete gel breaking was achieved within 2 h after mixing with the ethanol at the ratio of 10:1. The core flooding experiments indicate that the core damage rate caused by the CTAB-CA VES-fluid is ( 7.99 % ), which indicate that it does not cause much damage. Based on the experimental results, it is expected that CTAB-CA VES-fluid under high-temperature will make the proposed new VES-fluid an attractive thickening fracturing fluid.

Experimental Study of the Fracturing-Wetting Effect of VES Fracturing Fluid for the Coal Seam Water Injection

Long-time Seepage Evolution in Coal Fractures During Injection of Viscoelastic Surfactant Fracturing Fluids

Influence of Viscoelastic Surfactant Fracturing Fluids on Modified Coal Fracture Flow Characteristics

Viscoelastic Surfactant Fracturing Fluids for Use in Coal Seams: Effects of Surfactant Composition and Formulation

Viscoelastic Surfactant Fracturing Fluid for Underground Hydraulic Fracturing in Soft Coal Seams

Experimental study and analysis on physicochemical properties of coal treated with clean fracturing fluid for coal seam water injection

The Influence of Viscoelastic Surfactant Fracturing Fluids on Gas Desorption in Soft Seams

Experimental Study on the Optimized Anion Fracturing Fluid for Improving Coal Samples Permeability

Rheology of High-Temperature Resistant Fracturing Fluids Formed by VES, Acids and Oxidants for Enhancing CO2 Injection in Deep Coal Seams

Physicochemical Effect on Coal Pores of Hydrocarbon Chain Length and Mixing of Viscoelastic Surfactants in Clean Fracturing Fluids

Coupling Effect of Temperature, Gas, and Viscoelastic Surfactant Fracturing Fluid on the Microstructure and its Fractal Characteristics of Deep Coal

Experimental Study on the Influence of Coal Fracture Surface Roughness on Water Injection Seepage

Rheology of high-temperature resistant fracturing fluids formed by VES, acids and oxidants for enhancing CO 2 injection in deep coal seams

Role of VES-based fracturing fluid on gas sorption and diffusion of coal: An experimental study of Illinois basin coal

Fracture permeability damage and recovery behaviors with fracturing fluid treatment of coal: An experimental study

Influences of clean fracturing fluid viscosity and horizontal in-situ stress difference on hydraulic fracture propagation and morphology in coal seam

A Novel CO2 and Pressure Responsive Viscoelastic Surfactant Fluid for Fracturing

Experimental study on the influence of acid fracturing fluid on coal wettability

Effect of Different Types of Fracturing Fluid on the Microstructure of Anthracite: an Experimental Study

Experimental Investigation and Performance Evaluation of Modified Viscoelastic Surfactant (VES) as a New Thickening Fracturing Fluid

Experimental investigation on the feasibility and efficiency of shear-fracturing stimulation for enhancing coal seam permeability