Abstract:At present, only a single modification method is adopted to improve the shortcomings of erythritol (ET) as a phase change material (PCM). Compared with a single modification method, the synergistic effect of multiple modification methods can endow ET with comprehensive performance to meet the purpose of package, supercooling reduction, and enhancement of thermal conductivity. In this work, we innovatively combine graphene oxide (GO) nanosheet modified melamine foam (MF) and polyaniline (PANI) to construct a novel ET-based PCM by blending and porous material adsorption modification. PANI as the nucleation center can enhance the crystallization rate, thereby reducing the supercooling of ET. Meanwhile, foam can not only be used as a porous support material to encapsulate ET but also as a heat conduction reinforcement to improve heat storage and release rate. As a result, the supercooling of / (GMPET) composite PCM decreases from 91.2 °C of pure ET to 57.9 °C and its thermal conductivity (1.58 W∙m -1 ∙K -1 ) is about three times higher than that of pure ET (0.57 W∙m -1 ∙K -1 ). Moreover, after being placed at 140 °C for 2h, there is almost no ET leakage in the GMPET composite PCM, and the mass loss ratio is less than 0.75%. In addition, the GMPET composite PCM displays a high melting enthalpy of about 259 J∙g -1 and a high initial mass loss temperature of about 198 °C. Even after the 200 th cycling test, the phase transition temperature and the latent heat storage capacity of the GMPET PCM all remain stable. This work offers an effective and promising strategy to design ET-based composite PCM for the field of energy storage. Graphical abstract Download : Download high-res image (58KB) Download : Download full-size image

Preparation and Characterization of Erythritol/polyaniline Form‐stable Phase Change Materials Containing Silver Nanowires

Preparation and properties of erythritol/exfoliated graphite nanoplatelets @ polyaniline microencapsulated phase change materials with improved photothermal conversion efficiency

D-mannitol@silica/graphene Oxide Nanoencapsulated Phase Change Material with High Phase Change Properties and Thermal Reliability

Preparation and Characterization of the Properties of Polyethylene Glycol @ Si 3 N 4 Nanowires As Phase-Change Materials

Erythritol Confined in Multiwalled Carbon Nanotubes Reinforced Silica Aerogel As Novel Form-Stable Phase Change Materials

Preparation and characterization of erythritol/sepiolite/exfoliated graphite nanoplatelets form-stable phase change material with high thermal conductivity and suppressed supercooling

Polyacrylonitrile/polyethylene Glycol Phase-Change Material Fibres Prepared with Hybrid Polymer Blends and Nano-Sic Fillers Via Centrifugal Spinning

Polyethylene Glycol-Enwrapped Silicon Carbide Nanowires Network/expanded Vermiculite Composite Phase Change Materials: Form Stabilization, Thermal Energy Storage Behavior and Thermal Conductivity Enhancement

Nano-silver@polydopamine carbonized melamine foam supported polyethylene glycol phase change materials: With simultaneous improved photo-thermal conversion ability

Preparation and Performance of Novel Polyvinylpyrrolidone/polyethylene Glycol Phase Change Materials Composite Fibers by Centrifugal Spinning

A structured phase change material integrated by MXene/AgNWs modified dual-network and polyethylene glycol for energy storage and thermal management

Carbon-based nanoadditives induced enhancement of phase change thermal properties of sugar alcohol and interfacial heat transport mechanisms

Preparation and Characterization of Cross-Linking PEG/MDI/PE Copolymer As Solid–solid Phase Change Heat Storage Material

Preparation and characterization of phase change erythritol/expanded graphite@Ag composite materials for thermal energy storage

Hydrophilic modification of carbon nanotube to prepare a novel porous copper network-carbon nanotube/erythritol composite phase change material

Design of a graphene oxide@melamine foam/polyaniline@erythritol composite phase change material for thermal energy storage

A polyethylene glycol-based form-stable phase change material supported by nanoarray-modified metal foam

Preparation and Performance of Novel Form-Stable Composite Phase Change Materials Based on Polyethylene Glycol/White Carbon Black Assisted by Super-Ultrasound-Assisted

Silver microsphere doping porous-carbon inspired shape-stable phase change material with excellent thermal properties: preparation, optimization, and mechanism

Synergistic phase change and heat conduction of low melting-point alloy microparticle additives in expanded graphite shape-stabilized organic phase change materials

Preparation and characterization of polyethylene glycol‐based form‐stable phase change materials supported by poly (vinyl formal) foams