Abstract:Cohesive powders cannot flow freely in the silo and even behave like solid, which brings a great challenge to the powder handling process. Aeration is an effective method used to break the arch structure formed above the silo outlet and to promote the powder flow. However, it is difficult to determine the solid-liquid transition behaviors and to predict the critical arch-breaking gas flow rate in the aerated discharge systems. In this paper, cohesive powders including alumina (Al2O3), pulverized coal (COAL) and calcium carbonate (CaCO3) were used as experimental materials. Powder flow properties were characterized by conducting shear test, permeability test, and aerated discharge experiment. Unconfined yield strength of powders under zero pre-consolidated stress was obtained based on using a linear extrapolation procedure of shear parameters. Aerated discharge characteristics of cohesive powders were determined and, the critical condition corresponding to the transition from solid-like to liquid-state and the stable condition distinguishing the funnel flow pattern and mass flow pattern were defined, respectively. The Brown and Richards model, and the flow/no-flow criterion of Jenike were modified to describe the powder flow state and to predict the solid mass flow rate under the action of aeration by introducing the positive gas pressure gradient. A logical algorithm was proposed to predict the critical arch-breaking gas flow rate by assuming the same gas distribution coefficient under different aeration conditions. As a precondition, the critical solid mass flow rate was calculated by an iterative algorithm giving the same order of magnitude of that from the experiment, which was further related to the stable solid mass flow rate and the powder permeability index. This simplification provided us with satisfactory results for all the powders producing errors generally less than 30%, a more easy-to-operate method to determine the critical arch-breaking gas flow rate.

Design Optimization of an Aerated Hopper for Discharge of Cohesive Pulverized Coal

The Discharge of Pulverized Coal from a Pressurized Aerated Hopper

Prediction of Solid Discharge Rates of Pulverized Coal from an Aerated Hopper

Discharge characteristics of cohesive fine coal from aerated hopper

Study on the Fluidization and Discharge Characteristics of Cohesive Coals from an Aerated Hopper

Experimental Study on Aerated Discharge of Pulverized Coal

Flow behavior of aerated discharging of pulverized coal from hopper

Effect of feeding gas on hopper discharge of pulverized coal

Effects of Gas Type and Hopper Pressure on the Discharge of Pulverized Coal

Hopper Discharge of Cohesive Powders Using Pulsated Airflow

A further study on effect of gas type on pulverized coal discharge

Experimental investigation on bubble formation process in an aerated hopper

Hydraulic Optimization of Super-low Specific Speed Multistage Flameproof Submersible Pump with Inner Motor for Coal Mine

Hopper discharge of elongated particles of varying aspect ratio: Experiments and DEM simulations

Application of CPFD in hopper discharge of fine granular material

An Investigation of the Effect of Particle Size on Discharge Behavior of Pulverized Coal

The Influence of Fine Particles on Bulk and Flow Behavior of Pulverized Coal

Investigation of the Vibrating Feeding System for Sphericity Separation of Coated Fuel Particles Using DEM

Study on Fine Powder Discharged from Hoppers Modified with Insert

Powder Discharge from a Hopper-Standpipe System Modelled with CPFD

Study on solid-liquid transition behaviors of cohesive powders and predict the critical arch-breaking gas flow rate