Abstract:The study of alloys exhibiting noteworthy strength-ductility synergy at ambient and cryogenic temperatures has been a persistent area of interest in materials engineering. This interest extends to the recent development of high-entropy alloys (HEAs). The current investigation delves into the impact of diverse thermo-mechanical treatments on the phase and microstructure evolution in a face-centered cubic (FCC) Al7.5Co20.5Fe24Ni24Cr24 HEA. The transition from solid-solution annealing to recrystallization annealing leads to the formation of the desired hierarchical B2+L12+ σ precipitates, accompanied by a heterogeneous FCC matrix. The initiation of the B2 phase originates from nucleation on defect-rich sites, such as deformation bands. However, the coherent L12 phase homogeneously forms in the FCC matrix at intermediate temperature aging, as these sites are scarce or occupied. A heterogeneous structure emerges from the transition in annealing temperatures and the pinning effect of the B2 precipitates. The resulting heterogeneous structure exhibits an exceptional strength-ductility synergy at both room and liquid nitrogen (LN2) temperatures. This is evident in its mechanical properties with a yield strength of ∼717 MPa / ∼1109 MPa, an ultimate tensile strength of ∼1086 MPa / ∼1609 MPa, and an elongation of ∼34.3 % / ∼43.2 % at room / LN2 temperatures. The formation of deformation twins (DTs) is facilitated by localized stress buildup from hetero-deformation-induced (HDI) hardening stress at room temperature. The exceptional strength and ductility at LN2 temperature are attributed to a combination of factors. These include a high-density of stacking faults (SFs), DTs, and their interactions, including those with precipitates, SFs-based substructures, and Lomer-Cottrell locks. These multiple deformation mechanisms ensure consistent and sustained strain-hardening even under substantial strain. This paper sheds light on the complex interplay of microstructure, deformation mechanisms, and mechanical properties in the Al7.5Co20.5Fe24Ni24Cr24 HEA, potentially guiding the development of ultra-strong yet ductile alloys for cryogenic applications.

Phase Stability of an High-Entropy Al-Cr-Fe-Ni-V Alloy with Exceptional Mechanical Properties: First-principles and APT Investigations

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

The phase stability at intermediate-temperature and mechanical behavior of the dual-phase AlCoCr0.5FexNi2.5 high entropy alloys

First-principles calculation of phase transitions and mechanical properties of (CoCrNi)100−xAlx (0 ≤ x ≤ 28 at. %) high-entropy alloys

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Microstructure of and mechanical properties of an as-cast fine-grain dual-phase Fe-based high entropy alloy formed via solid-state phase transformation

First-principles prediction of high-entropy-alloy stability

Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy

Nanoscale phase separation in a fcc-based CoCrCuFeNiAl 0.5 high-entropy alloy

Multiscale-phase-driven strength-ductility synergy in Fe3Cr2CoNiAlx high entropy alloys

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Controlled Valence Electron Concentration Approach to Tailor the Microstructure and Phase Stability of an Entropy-Enhanced AlCoCrFeNi Alloy

Effects of Cr/Fe Ratio on Structural Evolution and Tensile Properties of the Fe75.7−xCrxNi15.1Al4.6Ti4.6 High‐Entropy Alloys

Microstructure and Mechanical Properties of Face‐Centered‐Cubic‐Based Cr‐Free Equiatomic High‐Entropy Alloys

Microstructure and Properties of Non-Equiatomic Ni10Cr6WFe9TiAlx High-Entropy Alloys Combined with High Strength and Toughness

Microstructure evolution and strengthening mechanisms in Ni36Co30Cr11Fe11Al12-xNbx high entropy alloys

Exceptional strength-ductility synergy at room and liquid nitrogen temperatures of Al7.5Co20.5Fe24Ni24Cr24 high-entropy alloy with hierarchical precipitate heterogeneous structure

Temperature-dependent enthalpy and entropy stabilization of solid solution phases in non-equiatomic CoCrFeNiTi high entropy alloys: computational phase diagrams and thermodynamics

Microstructural optimization of Fe x CrNiAl 0.5 Ti 0.5 high entropy alloys toward high ductility

Realizing strength-ductility combination of Fe3.5Ni3.5Cr2MnAl0.7 high-entropy alloy via coherent dual-phase structure

Stability Prediction of AlCoCrFeMo 0.05 N 2 High Entropy Alloy by Kinetic Monte Carlo Method