Abstract:Liquid CO2 enhanced coalbed methane recovery has been proposed for decades, and the accompanying effects of phase-transition and adsorption of liquid CO2 slightly influenced the coal structure strength. Studying the coal strength variation under the effects of liquid CO2 is of great significance for evaluating the selected liquid CO2 injection parameters, CO2 injectability, and coal cracking initiation capacity. However, the coupling effects of the temperature gradient and adsorption of cyclical liquid CO2 on the coal strength have not been systematically studied. In this study, based on the cyclical liquid CO2 fracturing experimental system, the low-rank coals were processed under the effects of liquid CO2 with different cyclical parameters. Subsequently, a uniaxial compression test was carried out to investigate the mechanical responses of the processed coals under the sole and coupled effect of liquid CO2 temperature and adsorption, respectively, using acoustic emission and strain gauge. The results showed that coals exhibited different destruction behaviours and fracture morphologies; for example, coals influenced by the sole effect showed an "axial separation" failure pattern, while liquid CO2 coupling affected coals showed a "separation and spallation" destruction form. Compared to raw coals, the affected coals contained a larger ring count and accumulated energy J, indicating that thermal cycling induced by uneven temperature distribution enhanced the generation of new cracks and expansion of the original cracks, and the enlarged crack volume provided sufficient adsorption sites for CO2 molecules to decrease the Gibbs free energy. The negative relationship between σc and cyclical parameters showed that the alternative temperature shock significantly degraded the cohesive strength among the grains with amounts of the damage accumulation, leading to tensile failure. The Je/Jt and Jr/Jt scatters positively and negatively correlated with the corresponding cyclical (cycles and time) and mechanical parameters (E and σc), respectively, indicating that the more liquid CO2 affected, the greater the damage accumulation, and the larger the destructive plastic region and lower the strain energy storage capacity, because of the synergy of the cold shock and gas adsorption. The research results provided theoretical guidance for optimizing liquid CO2 injection parameters for balancing the investment and output benefit of coalbed methane.

Effect of Slot Inclination Angle and Borehole-Slot Ratio on Mechanical Property of Pre-cracked Coal: Implications for ECBM Recovery Using Hydraulic Slotting

Relationship between pore structure and mechanical properties of bituminous coal under sub-critical and super-critical CO2 treatment

Numerical study on the effectiveness of directional well with multiple hydraulic slots for enhanced gas recovery in deep coal seam

Stress relief cracking and permeability improvement by high-pressure water jet slotting to enhance coalbed methane extraction

Experimental Study on the Effect of Coal Particle Size on the Mechanics, Pore Structure, and Permeability of Coal-like Materials for Low-Rank Coalbed Methane Reservoir Simulation

Study on Mechanical Properties and Crack Propagation of Raw Coal with Different Bedding Angles based on CT Scanning.

Effects of Bedding Characteristics on Crack Propagation of Coal under Mode II Loading: Experimental and Numerical Simulation

Experiment and Modeling of Permeability under Different Impact Loads in a Structural Anisotropic Coal Body

Study on the technology of permeability enhancement of deep hole pre-splitting blasting in a low-permeability coal seam

Coupling Influence of Inclination Angle and Moisture Content on Mechanical Properties and Microcrack Fracture of Coal Specimens

Experimental Study on the Porosity and Permeability Change of High-Rank Coal under Cyclic Loading and Unloading

Combined Effect of Multiple Slotting Spatial Parameters on Gas Extraction Efficiency: Numerical Analysis and Field Verification

Influence of Bedding and Cleats on the Mechanical Properties of a Hard Coal

Research on Deep Coalbed Methane Localized Spotting and Efficient Permeability Enhancement Technology

Dynamic fracture mechanics and energy distribution rate response characteristics of coal containing bedding structure

Micrometer-scale pores and fractures in coals and the effects of tectonic deformation on permeability based on fractal theory

Mechanical characteristics and crack evolution in specimens with double over-excavated cavities: experimental and numerical investigations

Study on the Effect of Bedding Plane and Loading Style on Fracture Process Zone in Coal

Investigation of the mechanical damage of low rank coals under the impacts of cyclical liquid CO2 for coalbed methane recovery

Coal breaking characteristics of high pressure water jet and the law of coordinated pressure relief of slits

The influence of closed pores and stacked coal grains on gas transport in CO2 injection enhanced CH4 recovery process