Abstract:The composite processing technique and nanofiller concentration and its functionalization significantly alter the properties of polymer nanocomposites. To realize this, multi-walled carbon nanotubes (CNT) were dispersed in a poly(vinylidene fluoride) (PVDF) matrix at carefully selected CNT concentrations by two illustrious methods, such as solution-cast and melt-mixing. Notwithstanding the processing method, CNTs induced predominantly the γ-phase in PVDF, instead of the commonly obtained β-phase upon nanofiller incorporation, and imparted significant improvements in dielectric properties. Acid-treatment of CNT improved its dispersion and interfacial adhesion significantly with PVDF, and induced a higher γ-phase content and better dielectric properties in PVDF as compared to pristine CNT. Further, the γ-phase content was found to be higher in solution-cast composites than that in melt-mixed counterparts, most likely due to solvent-induced crystallization in a controlled environment and slow solvent evaporation in the former case. However, interestingly, the melt-mixed composites showed a significantly higher dielectric constant at the onset of the CNT networked-structure as compared to the solution-cast composites. This suggests the possible role of CNT breakage during melt-mixing, which might lead to higher space-charge polarization at the polymer-CNT interface, and in turn an increased number of pseudo-microcapacitors in these composites than the solution-cast counterparts. Notably, PVDF with 0.13 vol% (volume fraction, f c = 0.0013) of acid-treated CNTs, prepared by melt-mixing, displayed the relative permittivity of ∼217 and capacitance of ∼5430 pF, loss tangent of ∼0.4 at 1 kHz and an unprecedented figure of merit of ∼10(5). We suggest a simple hypothesis for the γ-phase formation and evolution of the high dielectric constant in these composites. Further, the high-dielectric composite film showed marked improvements in mechanical and thermal properties over the neat PVDF film. These composites with exceptional dielectric properties and concomitant improvement in mechanical and thermal properties offer a great promise for use in flexible and mechanically robust charge storage devices.

A study on fluoroelastomer/MWCNTs-COOH dielectric composite with high temperature and acid resistance

Fluoro-polymer-coated carbon nanotubes for improved interfacial interactions and dielectric properties in MWCNTs/PVDF composites

Interfacial crosslinking enabled super-engineering polymer-based composites with ultra-stable dielectric properties beyond 350 °C

Mechanical performance of CNT-filled glass fiber/epoxy composite in in-situ elevated temperature environments emphasizing the role of CNT content

MWCNT–Polyimide Fiber-Reinforced Composite for High-Temperature Tribological Applications

Synthesis of Multiwalled Carbon Nanotube/fluorine‐containing Poly(p‐phenylene Benzoxazole) Composites Exhibiting Greatly Enhanced Dielectric Constants

Flexible and high-temperature dielectric ANF-NFC/mica@PDA composite film with high breakdown strength

Dielectric and Thermal Properties of Novel Three-Component CCTO/MWCNTs/polyarylene Ether Nitrile Composite Films

Fluorinated Carbon Nanotube/Nanofibrillated Cellulose Composite Film with Enhanced Toughness, Superior Thermal Conductivity, and Electrical Insulation

High dielectric constant acrylic resin based percolative composite with acidified carbon nanotubes intercalation of MXene

Functionalized Al2O3 fillers/glass fibers cloth/PTFE composites with excellent thermal properties

Enhanced dielectric performance in flexible MWCNT/poly(vinylidene fluoride-co-hexafluoropropene)-based nanocomposites by designing a tri-layered structure

In-situ crosslinked polyetherimide/BNNS composites with ultrahigh charged-discharged efficiency at high temperature

Preparation and properties of MWCNTs-BNNSs/epoxy composites with high thermal conductivity and low dielectric loss

Preparation of Batio3-Mwnt/Polyvinylidene Fluoride Three-Phase Composites with Novel Dielectric Behavior

Synergistically Improving the Thermal Conductivity and Mechanical Strength of PEEK/MWCNT Nanocomposites by Functionalizing the Matrix with Fluorene Groups

Electrical and thermal characteristics of MWCNTs modified carbon fiber/epoxy composite films

High dielectric permittivity and improved mechanical and thermal properties of poly(vinylidene fluoride) composites with low carbon nanotube content: effect of composite processing on phase behavior and dielectric properties

Enhanced Thermal Conductivity and Dielectric Properties of Epoxy Composites with Fluorinated Graphene Nanofillers

Dielectric properties of filled carbon nanotubes/epoxy composites with high dielectric constant

Facile Preparation and Properties of Polyvinylidene Fluoride Dielectric Nanocomposites Via Phase Morphology Control and Incorporation of Multiwalled Carbon Nanotubes Conductive Fillers