Abstract:The composite processing technique and nanofiller concentration and its functionalization significantly alter the properties of polymer nanocomposites. To realize this, multi-walled carbon nanotubes (CNT) were dispersed in a poly(vinylidene fluoride) (PVDF) matrix at carefully selected CNT concentrations by two illustrious methods, such as solution-cast and melt-mixing. Notwithstanding the processing method, CNTs induced predominantly the γ-phase in PVDF, instead of the commonly obtained β-phase upon nanofiller incorporation, and imparted significant improvements in dielectric properties. Acid-treatment of CNT improved its dispersion and interfacial adhesion significantly with PVDF, and induced a higher γ-phase content and better dielectric properties in PVDF as compared to pristine CNT. Further, the γ-phase content was found to be higher in solution-cast composites than that in melt-mixed counterparts, most likely due to solvent-induced crystallization in a controlled environment and slow solvent evaporation in the former case. However, interestingly, the melt-mixed composites showed a significantly higher dielectric constant at the onset of the CNT networked-structure as compared to the solution-cast composites. This suggests the possible role of CNT breakage during melt-mixing, which might lead to higher space-charge polarization at the polymer-CNT interface, and in turn an increased number of pseudo-microcapacitors in these composites than the solution-cast counterparts. Notably, PVDF with 0.13 vol% (volume fraction, f c = 0.0013) of acid-treated CNTs, prepared by melt-mixing, displayed the relative permittivity of ∼217 and capacitance of ∼5430 pF, loss tangent of ∼0.4 at 1 kHz and an unprecedented figure of merit of ∼10(5). We suggest a simple hypothesis for the γ-phase formation and evolution of the high dielectric constant in these composites. Further, the high-dielectric composite film showed marked improvements in mechanical and thermal properties over the neat PVDF film. These composites with exceptional dielectric properties and concomitant improvement in mechanical and thermal properties offer a great promise for use in flexible and mechanically robust charge storage devices.

High dielectric constant acrylic resin based percolative composite with acidified carbon nanotubes intercalation of MXene

Enhanced dielectric properties of acrylic resin elastomer (AE)-based percolative composite with modified MXene

Enhanced Dielectric Constant and Suppressed Electrical Conductivity in Polymer Nanocomposite Films Via Loading MXene/TiO2/MoS2 Nanosheets

Acrylic resin based dielectric composite with a novel hybrid composed of carbon nanotube grafted with graphene oxide

Nanocomposites of TiO2/cyanoethylated Cellulose with Ultra High Dielectric Constants

Enhanced Dielectric Performance of Three Phase Percolative Composites Based on Thermoplastic-Ceramic Composites and Surface Modified Carbon Nanotube

Ti3C2Tx MXene-Ag/silicone rubber composites with enhanced dielectric properties and improved mechanical properties

Enhancement of dielectric properties of acrylic resin elastomer‐based composites with SiO2 loaded carbon nanotubes

Enhanced dielectric and mechanical properties of CaCu3Ti4O12/Ti3C2Tx MXene/silicone rubber ternary composites

Enhanced dielectric performance in flexible MWCNT/poly(vinylidene fluoride-co-hexafluoropropene)-based nanocomposites by designing a tri-layered structure

Significantly improved dielectric and mechanical performance of Ti3C2Tx MXene/silicone rubber nanocomposites

Dramatically Improved Dielectric Properties of Polymer Composites by Controlling the Alignment of Carbon Nanotubes in Matrix

Poly(vinylidene fluoride- co -hexafluoropropylene)-MXene Nanosheet Composites for Microcapacitors

Enhanced Dielectric Properties of Polyvinylidene Fluoride Nanocomposites Via Calcium Copper Titanate Nanofibers

Combining Hydrophilic MXene Nanosheets and Hydrophobic Carbon Nanotubes for Mechanically Resilient and Electrically Conductive Elastomer Nanocomposites

Simultaneously Improved Thermal and Dielectric Performance of Epoxy Composites Containing Ti3C2Tx Platelet Fillers

High dielectric permittivity and improved mechanical and thermal properties of poly(vinylidene fluoride) composites with low carbon nanotube content: effect of composite processing on phase behavior and dielectric properties

High Dielectric Constant Percolative Nanocomposites Based On Ferroelectric Poly(Vinylidene Fluoride) And Acid-Treatment Multiwall Carbon Nanotubes

Improved dielectric and mechanical properties in Ti3C2Tx MXene-MoS2/Methyl vinyl silicone rubber composites as flexible dielectric materials

Advanced Dielectric Polymer Nanocomposites By Constructing A Ternary Continuous Structure In Polymer Blends Containing Poly(Methyl Methacrylate) (Pmma) Modified Carbon Nanotubes

Effect of BaTiO3 Filler Modification with Multiwalled Carbon Nanotubes on Electric Properties of Polymer Nanocomposites