Abstract:Coseismic landslides pose a significant threat to the sustainability of both the natural environment and the socioeconomic fabric of society. This escalation in earthquake frequency has driven a growing interest in regional-scale assessment techniques for these landslides. The widely adopted infinite slope model, introduced by Newmark, is commonly utilized to assess coseismic landslide hazards. However, this conventional model falls short of capturing the influence of rock mass structure on slope stability. A novel methodology was previously introduced, considering the roughness of potential slide surfaces on the inner slope, offering a fresh perspective on coseismic landslide hazard mapping. In this paper, the proposed method is recalibrated using new datasets from the 2013 Lushan earthquake. The datasets encompass geological units, peak ground acceleration (PGA), and a high-resolution digital elevation model (DEM), rasterized at a grid spacing of 30 m. They are integrated within an infinite slope model, employing Newmark's permanent deformation analysis. This integration enables the estimation of coseismic displacement in each grid area resulting from the 2013 Lushan earthquake. To validate the model, the simulated displacements are compared with the inventory of landslides triggered by the Lushan earthquake, allowing the derivation of a confidence level function that correlates predicted displacement with the spatial variation of coseismic landslides. Ultimately, a hazard map of coseismic landslides is generated based on the values of the certainty factor. The analysis of the area under the curve is utilized to illustrate the improved effectiveness of the proposed method. Comparative studies with the 2014 Ludian earthquake reveal that the coseismic landslides triggered by the 2013 Lushan earthquake predominantly manifest as shallow rock falls and slides. Brittle coseismic fractures are often associated with reverse seismogenic faults, while complaint coseismic fractures are more prevalent in strike–slip seismogenic faults. The mapping procedure stands as a valuable tool for predicting seismic hazard zones, providing essential insights for decision-making in infrastructure development and post-earthquake construction endeavors.

Seismic Landslides Hazard Zoning Based on the Modified Newmark Model: a Case Study from the Lushan Earthquake, China

Impact of Earthquake-Induced-landslides on Hydrologic Response of a Steep Mountainous Catchment: a Case Study of the Wenchuan Earthquake Zone

Incorporating Effects of Slope Units and Sliding Areas into Seismically Induced Landslide Risk Modeling in Tectonically Active Mountainous Areas

Application of Logistic Regression Model for Hazard Assessment of Landslides Caused by the 2012 Yiliang Ms 5.7 Earthquake in Yunnan Province, China

An Infinite Slope Model Considering Unloading Joints for Spatial Evaluation of Coseismic Landslide Hazards Triggered by a Reverse Seismogenic Fault: A Case Study of the 2013 Lushan Earthquake

An Integrated SEM-Newmark Model for Physics-Based Regional Coseismic Landslide Assessment

Travel Distances of Earthquake-induced Landslides

Construction of a Joint Newmark–Runout Model for Seismic Landslide Risk Identification: A Case Study in the Eastern Tibetan Plateau

A Modified Newmark Method for Calculating Permanent Displacement of Seismic Slope Considering Dynamic Critical Acceleration

Quantification of Human Vulnerability to Earthquake-Induced Landslides Using Bayesian Network

Assessment of earthquake-induced landslide hazard zoning using the physics-environmental coupled Model

Landslide Hazard Assessment Method Considering the Deformation Factor: A Case Study of Zhouqu, Gansu Province, Northwest China

Risk Assessment of Seismic Landslides Based on Analysis of Historical Earthquake Disaster Characteristics

Probabilistic hazard mapping of earthquake-induced landslides

Applicability of Two Newmark Models in the Assessment of Coseismic Landslide Hazard and Estimation of Slope-Failure Probability: An Example of the 2008 Wenchuan Mw 7.9 Earthquake Affected Area

Probabilistic Modeling of Seismically Triggered Landslides Using Monte Carlo Simulations

A Method Predicting the Earthquake-Induced Landslide Risk by Back Analyses of Past Landslides and Its Application in the Region of the Wenchuan 12/5/2008 Earthquake

Landslide hazard assessment of the fault zone considering the fault effect: a case study of the Lixian–Luojiabu fault zone in Gansu Province (China)

Landslide Damage Incurred to Buildings: A Case Study of Shenzhen Landslide

Seismic reliability analysis of soil slope based on Newmark sliding block model with representative slip surfaces and response surfaces

Co-seismic landslide hazard assessment of the 2017 Ms 6.9 Milin earthquake, Tibet, China, combining the logistic regression–information value and Newmark displacement models