Abstract:Coseismic landslides pose a significant threat to the sustainability of both the natural environment and the socioeconomic fabric of society. This escalation in earthquake frequency has driven a growing interest in regional-scale assessment techniques for these landslides. The widely adopted infinite slope model, introduced by Newmark, is commonly utilized to assess coseismic landslide hazards. However, this conventional model falls short of capturing the influence of rock mass structure on slope stability. A novel methodology was previously introduced, considering the roughness of potential slide surfaces on the inner slope, offering a fresh perspective on coseismic landslide hazard mapping. In this paper, the proposed method is recalibrated using new datasets from the 2013 Lushan earthquake. The datasets encompass geological units, peak ground acceleration (PGA), and a high-resolution digital elevation model (DEM), rasterized at a grid spacing of 30 m. They are integrated within an infinite slope model, employing Newmark's permanent deformation analysis. This integration enables the estimation of coseismic displacement in each grid area resulting from the 2013 Lushan earthquake. To validate the model, the simulated displacements are compared with the inventory of landslides triggered by the Lushan earthquake, allowing the derivation of a confidence level function that correlates predicted displacement with the spatial variation of coseismic landslides. Ultimately, a hazard map of coseismic landslides is generated based on the values of the certainty factor. The analysis of the area under the curve is utilized to illustrate the improved effectiveness of the proposed method. Comparative studies with the 2014 Ludian earthquake reveal that the coseismic landslides triggered by the 2013 Lushan earthquake predominantly manifest as shallow rock falls and slides. Brittle coseismic fractures are often associated with reverse seismogenic faults, while complaint coseismic fractures are more prevalent in strike–slip seismogenic faults. The mapping procedure stands as a valuable tool for predicting seismic hazard zones, providing essential insights for decision-making in infrastructure development and post-earthquake construction endeavors.

Seismic reliability analysis of soil slope based on Newmark sliding block model with representative slip surfaces and response surfaces

Probabilistic seismic slope stability analysis using swarm response surfaces and rotational Newmark sliding model with primary sliding direction

Probability Analysis of Submarine Landslides Based on the Response Surface Method: A Case Study from the South China Sea

Efficient Reliability Analysis of Slopes Integrating the Random Field Method and a Gaussian Process Regression‐based Surrogate Model

Reliability Analysis of Seismic Slope Incorporating Interactions among Multiple Sliding Blocks Using Imbalance Thrust Force Method in Primary Sliding Direction

Probabilistic assessment of seismic performance of slopes considering the sensitivity of sliding surface to input motion

A Modified Newmark Method for Calculating Permanent Displacement of Seismic Slope Considering Dynamic Critical Acceleration

Probabilistic Assessment of Seismic Stability of a Rock Slope by Combining the Simulation of Stochastic Ground Motion with Permanent Displacement Analysis

Probabilistic investigation of the seismic displacement of earth slopes under stochastic ground motion: A rotational sliding block analysis

Reliability Analysis on Permanent Displacement of Earth Slopes Using the Simplified Bishop Method

Incorporating Effects of Slope Units and Sliding Areas into Seismically Induced Landslide Risk Modeling in Tectonically Active Mountainous Areas

A simplified nonlinear coupled Newmark displacement model with degrading yield acceleration for seismic slope stability analysis

Modeling of rapid evaluation for seismic stability of soil slope by finite element limit analysis

Seismic fragility analysis of slopes based on large-scale shaking table model tests

Seismic collaborative reliability analysis for a slope considering spatial variability base on optimized subset simulation

Reliability analysis of slopes reinforced by frame-anchor structures under earthquake conditions

Probabilistic evaluation of the seismic stability of infinite submarine slopes integrating the enhanced Newmark method and random field

Reliability analysis using Limit equilibrium and Smoothed Particle Hydrodynamics-based method for homogeneous soil slopes

Dynamic response of a dip slope with multi-slip planes revealed by shaking table tests

Stability Analysis of Seismic Slope Based on Relative Residual Displacement Increment Method

An Infinite Slope Model Considering Unloading Joints for Spatial Evaluation of Coseismic Landslide Hazards Triggered by a Reverse Seismogenic Fault: A Case Study of the 2013 Lushan Earthquake