Abstract:Structural frames made of prefabricated laminated timber beams and columns connected by unbonded post-tensioning and additional mild steel reinforcement have recently been proposed for multi-story timber buildings. The benefits of post-tensioning to assemble prefabricated timber elements are rapid erection, simple connections, and high seismic resistance. It has been shown that prefabricated post-tensioned timber members can be designed to have excellent seismic resistance, with the post-tensioning providing re-centering capacity after major earthquakes, while energy is dissipated through yielding of replaceable mild steel devices. This article summarizes the results of an investigation into the seismic response of full-scale timber beam-column joints, subjected to extensive experimental study and numerical modelling, performed as part of a larger research program on timber structures at the University of Canterbury, New Zealand. The beams and columns were fabricated from laminated veneer lumber (LVL). The tested joint was designed as part of a moment-resisting frame for a six-story building located in a high-seismic region. The timber members and the re-centering/dissipating elements were optimized to produce the intended dissipating-recentering behavior and commercially available prestressing arrangements were used to verify their applicability in a timber structure. The results of the experiments on both interior and exterior beam-column joints are presented, for both post-tensioned-only and hybrid models. The post-tensioned-only solutions exhibited nonlinear elastic behavior with full re-centering while the hybrid systems provided significantly greater levels of energy dissipation compared with the post-tensioned-only solution. The joints were also tested with a number of additional features such as steel armoring plates at the interface, reinforcement in the form of long screws embedded into the column and combination of the two. The armored the column faces with steel plates exhibited higher stiffness and smaller deformation in compression perpendicular to the grain. The joint region within reinforced column reduce the subsequent drop in prestressing forces in the system. Combination of armoring and reinforcements protect the joint region through minimizing joint shear panel deformation. In general, the tested arrangements exhibited high levels of ductility and negligible residual deformations with no significant damage of the structural elements. The numerical models accurately predict the behavior of different types of beam-column joints tested and can be used to design similar connections. These full-scale tests also demonstrate the practical feasibility of post-tensioned timber frames for multi-story timber buildings.

Seismic Performance Of Timber-Steel Hybrid Structures. I: Subassembly Testing And Numerical Modeling

A SIMPLIFIED ANALYTICAL PROCEDURE FOR SEISMIC ANALYSIS OF TIMBER LIGHT-FRAME SHEAR WALLS

Seismic performance assessment of steel frame infilled with prefabricated wood shear walls

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Pseudo-dynamic testing of hybrid frame with steel beams bolted to CFT columns

Seismic Behavior of Cold-Formed Steel Frame Shear Walls Sheathed with Ply-Bamboo Panels

Seismic Behavior of Pc Column and Steel Beam Composite Moment Frame with Posttensioned Connection

Seismic behavior of high strength concrete composite walls with embedded steel truss

Study on remote collaborative pseudo-dynamic tests of multi-story frames

Self-Centering Steel-Timber Hybrid Shear Wall: Experimental Test and Parametric Analysis

Seismic performance of Chinese traditional timber frames

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Seismic Performance Evaluation for a Traditional Chinese Timber-frame Structure

Seismic behavior of innovative hybrid CLT-steel shear wall for mid-rise buildings

An experimental and simulated investigation into the seismic performance of Chuan-dou timber structures with infilled walls

Experimental and analytical fragility assessment of a combined heavy timber–steel‐braced frame through hybrid simulation

Seismic behavior of steel frame infilled with wall-panels connected by sliding joint

Numerical Analysis Study on Seismic Performance of Semi-Rigid Steel Frame Infilled with Prefabricated Composite Wall Panels

Seismic Performance of Full-Scale Post-Tensioned Timber Beam-Column Connections

Displacement-Based Design of Hybrid RC–Timber Structure: Seismic Risk Assessment

Experimental and Numerical Investigations on the Hybrid Dowel and Bonding Steel Plate Joints for Timber Structures