Improving Fatigue Performance of Laser-Welded 2024-T3 Aluminum Alloy Using Dry Laser Peening
Tomokazu Sano,Takayuki Eimura,Akio Hirose,Yosuke Kawahito,Seiji Katayama,Kazuto Arakawa,Kiyotaka Masaki,Ayumi Shiro,Takahisa Shobu,Yuji Sano,Sano,Eimura,Hirose,Kawahito,Katayama,Arakawa,Masaki,Shiro,Shobu,Sano
DOI: https://doi.org/10.3390/met9111192
IF: 2.695
2019-11-06
Metals
Abstract:The purpose of the present study was to verify the effectiveness of dry laser peening (DryLP), which is the peening technique without a sacrificial overlay under atmospheric conditions using femtosecond laser pulses on the mechanical properties such as hardness, residual stress, and fatigue performance of laser-welded 2024 aluminum alloy containing welding defects such as undercuts and blowholes. After DryLP treatment of the laser-welded 2024 aluminum alloy, the softened weld metal recovered to the original hardness of base metal, while residual tensile stress in the weld metal and heat-affected zone changed to compressive stresses. As a result, DryLP treatment improved the fatigue performances of welded specimens with and without the weld reinforcement almost equally. The fatigue life almost doubled at a stress amplitude of 180 MPa and increased by a factor of more than 50 at 120 MPa. DryLP was found to be more effective for improving the fatigue performance of laser-welded aluminum specimens with welding defects at lower stress amplitudes, as stress concentration at the defects did not significantly influence the fatigue performance.
materials science, multidisciplinary,metallurgy & metallurgical engineering