Abstract:Being a candidate of Lithium-ion batteries (LIBs) cathode material, olivine structured LiFePO4 (LFP) has various advantages, however, the major problems associated with LFP still lie in the fact of its poor electric conductivity and low Li+ diffusivity along the [010] direction only[1-2]. Based on this viewpoint, we wrapped (010) facet orientated LFP nanoplatelets (LFP NPs) with N-doped graphene aerogel (N-GA) to prepare a porous N-GA modified LFP composite (LFP@N-GA) through a facile electrostatic attraction treatment combined with a self-assembly process. In such a composite as shown in Figure. 1a-1i, LFP NPs are well surrounded by a N-GA constructed bicontinuous conductive network, which effectively facilitate both Li+and electron transport, and thus, effectively reducing the polarization[3-4]. Electrochemical test results demonstrated that the LFP@N-GA composite electrode indeed exhibited a ultrahigh rate capability (78 mAh·g−1at 100 C) and a stable cyclability (90% capacity retention over 1000 cycles at 10 C), as shown in Figure. 1j and 1k[5-6]. Such a LFP@N-GA cathode material may advance the development of high-power LIB for EVs and HEVs, and the preparation method is independent from the morphology and the synthesis process of the electrochemically active material, and therefore, compatible with many other energy-storage materials for different applications. Figure 1.Characterization and electrochemical performance of LFP@N-GA composite: (a, b) SEM images at different magnification. (c-h) TEM and HRTEM images. Inset of d: FFT pattern of the HRTEM image, where B denotes the beam direction, indicating the (010) facet orientation. (i) HAADF-STEM image and elemental mapping results of LFP@N-GA. (j) and (k) Rate and cycling performance. Reference ： [1]Padhi A. K., Nanjundaswamy K. S., et al., J. Electrochem. Soc., 1997, 144, 1188-1194. [2]Wang B., Xu B., et al., Nanoscale, 2014, 6 (2): 986-995. [3]Wang B., Wang Q., et al., RSC Adv., 2013, 3 (43): 20024-20033. [4]Wang B., Wang S., et al., Mater. Lett., 2014, 118: 137-141. [5]Wang B., Al A. W., et al., Energy Environ. Sci., 2015, 8 (3): 869-875. [6]Wang, B.; Wang D., et al., J. Mater. Chem. A, 2013, 1 (1): 135-144. Figure 1

In-situ Plasma Assisted Formation of Graphitic Nanosheet Supported N-doped Carbon-Coated Antisite Defectless LiFePO4 As a High-Performance Cathode Material for Lithium-Ion Batteries

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

N-doped Graphitized Carbon-Coated Fe 2 O 3 Nanoparticles in Highly Graphitized Carbon Hollow Fibers for Advanced Lithium-ion Batteries Anodes

Preparation of Dual Layers N-doped Carbon@Mesoporous Carbon@Fe3O4 Nanoparticle Superlattice and Its Application in Lithium-Ion Battery

Active-Site-Specific Structural Engineering Enabled Ultrahigh Rate Performance of the NaLi3Fe3(PO4)2(P2O7) Cathode for Lithium-Ion Batteries

Nano-scale hollow structure carbon-coated LiFePO4 as cathode material for lithium ion battery

Nickel catalyzed graphitized carbon coated LiFe1-xNixPO4 composites as cathode material for high-performance lithium-ion batteries

Active-Site-Specific Structural Engineering Enabled Ultrahigh Rate Performance of the NaLi 3 Fe 3 (PO 4 ) 2 (P 2 O 7 ) Cathode for Lithium-Ion Batteries

Confined Growth of Li4ti5o12 Nanoparticles in Nitrogen-Doped Mesoporous Graphene Fibers for High-Performance Lithium-Ion Battery Anodes

Construction of multiwall carbon nanotubes/biomass-derived nitrogen-doped carbon@regenerated LiFePO4 cathode materials for lithium-ion batteries

N, F Co‐Doped Carbon Material Self‐Supporting Cathode for High‐Performance Lithium‐Oxygen Batteries

Three-Dimensional Porous LiFePO4 Cathode Composite Decorated by Nitrogen-Doped Graphene Aerogel for Ultrafast Lithium Storage

Mesoporous carbon-coated LiFePO4 nanocrystals co-modified with graphene and Mg2+ doping as superior cathode materials for lithium ion batteries

Fe3O4nanoflakes in an N-doped Carbon Matrix As High-Performance Anodes for Lithium Ion Batteries

Restraining formation of Fe-Li anti-site defects via in-situ surface construction on single-crystal LiFePO 4 cathode for extending fast charging lifespan

Surface Modification Engineering Enabling LiMn x Fe1‐ x PO4 Cathode Against Aggressive Cathode Chemistries for Excellent Performance Lithium‐ion batteries

Microstructure and lithium storage properties of Fe2O3 in N-doped carbon nanosheets

Fabrication of Highly N-Doped Graphene-Like Carbon Templated from G-C3n4 Nanosheets As Promising Li-ions Battery Anode

Sustainable and facile synthesis of high-performance nitrogen-doped carbon/graphene@LiFePO4 cathode materials from spent LiFePO4

Catalytic Strategies Enabled Rapid Formation of Homogeneous and Mechanically Robust Inorganic‐Rich Cathode Electrolyte Interface for High‐Rate and High‐Stability Lithium‐Ion Batteries

In situ anchoring of FeNi nanoparticles into three-dimensional nitrogen-doped carbon framework as a self-supporting electrode for high-performance lithium storage