Abstract:Ammonia is a common pollutant, present in municipal wastewater streams. With the continuous shift of people moving to cities and the growing world's population, the overall wastewater amount is rising. Current ammonia treatment processes in wastewater treatment plants include biological nitrification. Here the ammonia is converted to nitrate or nitrogen. Unfortunately, the capital and operational expenditure costs of such processing are high and the ammonia is converted to products that have no value. Ammonia is a carbon-free energy carrier. Recently, technological solutions have been introduced to strip ammonia from wastewater [1]. The recovered ammonia can be electrochemically oxidised to benign nitrogen in an electrolyser, which can offer a cost-efficient technology to couple wastewater remediation at an anode with the production of a valuable by-product at the cathode, hydrogen. Currently, the commercialisation of the ammonia electrolyser technology is hindered by slow reactions at the anode and the cathode as well as the deactivation or degradation of the catalysts over time [2,3]. Consequently, the development of inexpensive, efficient anode material is imperative to reduce costs associated with ammonia destruction and electrochemical hydrogen production. This study focuses on a non-noble metal NiCu catalyst as a durable anode for alkaline ammonia electrolysis. We report that nickel-copper catalysts can oxidise ammonia to nitrogen at room temperature, see figure below. During electrolysis experiments, gas chromatography of the off-gases confirmed that both, nitrogen at the anode and hydrogen at the cathode, are generated with high faradaic efficiencies. Anode morphology and structure before and after electrolysis was investigated by X-ray diffraction (XRD), X-ray fluorescence (XRF), X-ray Photoelectron Spectroscopy (XPS), and scanning electron microscopy (SEM). To monitor possible intermediates produced by electrolysis, the electrolyte was analysed for NOx regularly by cuvette test and the electrode off-gasses were continuously monitored by GC-TCD. Overall, the electrode showed stability after continuous electrolysis in ammonia for over 30 hours. Further results will be presented at the conference. References: [1] L. Kinidi, I.A.W. Tan, N.B. Abdul Wahab, K.F.B. Tamrin, C.N. Hipolito, S.F. Salleh, Recent Development in Ammonia Stripping Process for Industrial Wastewater Treatment, International Journal of Chemical Engineering. 2018 (2018) 1–14. https://doi.org/10.1155/2018/3181087. [2] B. Zhou, N. Zhang, Y. Wu, W. Yang, Y. Lu, Y. Wang, S. Wang, An option for green and sustainable future: Electrochemical conversion of ammonia into nitrogen, Journal of Energy Chemistry. 60 (2021) 384–402. https://doi.org/10.1016/j.jechem.2021.01.011. [3] N.M. Adli, H. Zhang, S. Mukherjee, G. Wu, Review—Ammonia Oxidation Electrocatalysis for Hydrogen Generation and Fuel Cells, J. Electrochem. Soc. 165 (2018) J3130–J3147. https://doi.org/10.1149/2.0191815jes. Figure 1

Experimental and Analytical Study on Electrolytic Decomposition of HAN-water Solution Using Graphite Electrodes

Effective Anodic Sulfide Removal Catalyzed by Single Nickel Atoms on Nitrogen-Doped Graphene with Stainless Steel Substrate

Co-Electrolysis-Assisted Decomposition of Hydroxylammonium Nitrate–Fuel Mixtures Using Stainless Steel–Platinum Electrodes

Thermal and Electrolytic Decomposition and Ignition of HAN–Water Solutions

Decomposition and ignition of HAN-based monopropellants by electrolysis

Experimental Studies on Parametric Effects and Reaction Mechanisms in Electrolytic Decomposition and Ignition of HAN Solutions.

Synthesis of Hydroxylammonium Nitrate and Its Decomposition over Metal Oxide/Honeycomb Catalysts

Insights into electrochemical behavior and anodic oxidation processing of graphite matrix in aqueous solutions of sodium nitrate

Effect of water molecules co-intercalation and hydrolysis on the electrochemical deconsolidation of matrix graphite in aqueous nitric acid

Removal of chemical oxygen demand and ammonia nitrogen from lead smelting wastewater with high salts content using electrochemical oxidation combined with coagulation–flocculation treatment

In Situ Anodic Transition and Cathodic Contamination Affect the Overall Voltage of Alkaline Water Electrolysis

Preparation and electrocatalytic performance of novel-integrated Ni-Mo sulfide electrode materials for water splitting

(Digital Presentation) Electrocatalytic Ammonia Oxidation Coupled with Hydrogen Production - Moving Towards a Carbon Neutral Water Treatment Cycle

Fast and Stable Electrochemical Production of H 2 O 2 by Electrode Architecture Engineering

Synthesis and Separation of Mellitic Acid and Graphite Oxide Colloid Through Electrochemical Oxidation of Graphite in Deionized Water

Enhanced Electrocatalytic Activity on Water Splitting with Niox Nanoflakes Electrode Fabricated Via Selective Etching and Reconstruction of Niw Amorphous Films

Sequential oxygen evolution and decoupled water splitting via electrochemical redox reaction of nickel hydroxides

Single-Step Hydrothermal Synthesis of HNO3 Exfoliated Graphite/Fe2O3 Composite for Methanol Oxidation in Acidic Media

Stabilizing Hydrogen Radicals in Two‐Dimensional Cobalt‐Copper Mesoporous Nanoplates for Complete Nitrate Reduction Electrocatalysis to Ammonia

Efficient Removal of Ammonia Nitrogen by an Electrochemical Process for Spent Caustic Wastewater Treatment

Facile Electrodeposition of Amorphous Nickel/Nickel Sulfide Composite Films for High-Efficiency Hydrogen Evolution Reaction