Abstract:As one of the most efficient, low-cost, and readily available electrocatalysts for oxygen evolution reaction (OER) in alkaline environments, the nickel-iron electrocatalyst is of great significance to commercial water splitting. In this study, NiFe-layered double hydroxide loaded on nickel foam (NiFe-LDH/NF) was synthe-sized via a simple one-step hydrothermal method, whose OER catalytic performance could be successfully optimized by further electrochemical reconstruction. The results show that NF is an effective precursor to loading crystallized Ni(OH)2 nanoparticles during hydrothermal synthesis, leading to the generation of high-performance NiOOH during OER reconstruction. Under the optimal Ni:Fe feeding ratio, Ni2Fe1-LDH/NF requires an ultra-low OER overpotential of 239 mV at 50 mA cm-2 and 260 mV at 100 mA cm-2 , whose Tafel slope is only 64.1 mV dec-1. Impressively, Ni2Fe1-LDH/NF also achieves an ultra-low voltage of 1.44 V at 10 mA cm-2 with excellent long-term stability for overall water splitting. Unlike the previous viewpoint that only Ni species dominate surface reconstruction of NiFe-LDH, in this article the decisive influence related to Fe species on the reconstruction layers' activity and stability is confirmed by electrochemistry, Raman, and XPS analysis during reconstruction process. During OER reconstruction, the surface Ni:Fe ratios can be "self -adaptively" regulated to an appropriate region, thus the stable reconstruction layers rich in NiOOH can be formed as the protective shells for NiFe-LDH. Furthermore, such "self-adaptive" reconstruction, assisted with appropriate initial Ni:Fe feeding ratios, can also stimulate more Ni3+ active sites for OER, benefitting the outstanding catalytic performance of NiFe-LDH/NF for overall water splitting and prospective large-scale application.(c) 2022 Elsevier B.V. All rights reserved.

Enhanced Electrocatalytic Activity on Water Splitting with Niox Nanoflakes Electrode Fabricated Via Selective Etching and Reconstruction of Niw Amorphous Films

Co–Ni‐Based Nanotubes/Nanosheets As Efficient Water Splitting Electrocatalysts

Self-adaptively Electrochemical Reconstruction of NiFe-layered Double Hydroxide on Ni Foam for High-Performance Water Splitting

Hydrogen production via highly efficient electrocatalyst based on 3D NixCo1-x(OH)2/NiFe-AM induce overall water splitting

Oxygen Vacancy-enhanced Ni3FeN/NF Nanoparticle Catalysts for Efficient and Stable Electrolytic Water Splitting

Efficient Water Oxidation Using Nanostructured α-Nickel-Hydroxide as an Electrocatalyst

Enhanced Electrocatalytic Activity for Water Splitting on NiO/Ni/Carbon Fiber Paper

Controlled Direct Electrodeposition of Crystalline NiFe/amorphous NiFe-(oxy)hydroxide on NiMo Alloy As a Highly Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Ultrafast Room-Temperature Synthesis of Self-Supported NiFe-Layered Double Hydroxide As Large-Current-Density Oxygen Evolution Electrocatalyst.

Fabrication of NiC/MoC/NiMoO4 Heterostructured Nanorod Arrays as Stable Bifunctional Electrocatalysts for Efficient Overall Water Splitting

Sandwich-like NiOx/NiCo2O4/Co3O4 nanoflakes enable efficient oxygen evolution electrocatalysis

NiFe Hydroxide Supported on Hierarchically Porous Nickel Mesh As a High-Performance Bifunctional Electrocatalyst for Water Splitting at Large Current Density

Crystalline‐Amorphous Ni 2 P 4 O 12 /NiMoO x Nanoarrays for Alkaline Water Electrolysis: Enhanced Catalytic Activity via In Situ Surface Reconstruction

Regulating the Electronic Structure and Active Sites in Ni Nanoparticles by Coating N-Doped C Layer and Porous Structure for an Efficient Overall Water Splitting

Nanoscale Nickel Oxide/nickel Heterostructures for Active Hydrogen Evolution Electrocatalysis.

In situ preparation of Fe-doped NiMoO 4 nanoflower clusters as efficient electrocatalysts for oxygen evolution reaction and overall water splitting

Blending Cr2O3 into a NiO-Ni Electrocatalyst for Sustained Water Splitting.

Self-supported NiFe-LDH@CoSx nanosheet arrays grown on nickel foam as efficient bifunctional electrocatalysts for overall water splitting

A Nanoporous Nickel-Iron Alloy Seamlessly Anchored into Hierarchical Porous Nickel for Efficient and Extremely Stable Water Splitting

Ultrathin NiFe-Based Nanosheet Electrocatalysts for Efficient Water Oxidation

Amorphous Nickel-Based Thin Film As a Janus Electrocatalyst for Water Splitting