Abstract:Metal additive manufacturing (AM) techniques, such as selective laser melting (SLM), enable the fabrication of advanced aluminum matrix composites (AMCs) with distinct microstructure and enhanced mechanical properties. In this study, an ultrasonic vibration technique together with SLM is employed to fabricate TiN/AlSi10Mg nanocomposites with alternative TiN nanoparticle contents (0, 2, 4, and 6 wt.%). The effects of TiN nanoparticles on the SLM processability, microstructure, texture evolution, recrystallization, and mechanical properties of TiN/AlSi10Mg are investigated. Results show that nearly fully-dense composite parts can be manufactured by enhancing the SLM processability. Increasing the TiN addition can gradually transform the crystallographic orientation from a strong (001) direction to a relatively random distribution that vanishes the preferred (001) texture. The continuous heterogeneous nucleation, recrystallization of α-Al grains, and Zener pinning along the grain boundaries occur during the SLM process due to the presence of the TiN nanoparticles, resulting in a significantly refined microstructure. The TiN nanoparticles are dominantly distributed along the Al grain boundaries, while rod-like nano-Si precipitates are well-dispersed inside the grains. Both TiN and nano-sized Si have well-bonded interfaces with the Al matrix. The optimal TiN content is found to be 4 wt.%, at which the additively manufactured specimens exhibit high tensile strength (492 ± 5.5 MPa), high ductility (7.5 % ± 0.29), and microhardness (157 ± 4.9 HV) simultaneously. The underlying mechanisms of strength and ductility improvement are also elucidated. This study sheds light on the additive manufacturing of aluminum nanocomposites out of nanoparticles modified composite powder for the production of advanced materials with free-form microarchitectures.

Effect of TiC Content on the Al-15Si Alloy Processed by Selective Laser Melting: Microstructure and Mechanical Properties

Enhanced Micro-Hardness and Wear Resistance of Al-15Si/TiC Fabricated by Selective Laser Melting

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Microstructure and Mechanical Behavior of TiCN Reinforced AlSi10Mg Composite Fabricated by Selective Laser Melting

Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting

Effect of Ti on the Microstructure and Wear Behavior of a Selective Laser Melted Al-Cu-Mg-Si Alloy

Effects of Micron/Submicron TiC on Additively Manufactured AlSi10Mg: A Comprehensive Study from Computer Simulation to Mechanical and Microstructural Analysis

Effects of Submicron-Sized TiC Particles on the Microstructure Modification and Mechanical Properties of Al-Si-Mg Alloy

Effect of Laser Energy Density on Microstructural Evolution of Selective Laser Melted Ti-15Zr Alloy

Effects of Laser Processing Parameters on Microstructure and Mechanical Properties of Additively Manufactured AlSi10Mg Alloys Reinforced by TiC

Effect of Processing Parameters on Tensile Properties and Microstructure of Selective Laser Melted AlSi10Mg Alloy

Microstructure evolution and mechanical properties of selective laser melting fabricated hybrid particle reinforced AlSi10Mg composites

Effect of the Addition of Cu and Al on the Microstructure, Phase Composition and Properties of a Ti-6Al-4V Alloy Obtained by Selective Laser Melting

Microstructural evolution and mechanical performance of in-situ TiB2/AlSi10Mg composite manufactured by selective laser melting

Microstructure and Mechanical Property of Ti–5Al–5Mo–5V–3Cr–1Zr Alloy Fabricated by Selective Laser Melting with a Preheated Substrate

Effect of Ti microalloying and laser remelting on the microstructure and mechanical properties of laser powder bed fusion Al-12Si alloy

Microstructure, heat treatment and mechanical properties of TiB2/Al–7Si–Cu–Mg alloy fabricated by selective laser melting

Effect of Heat Treatment on Microstructure and Properties of Selective Laser Melting AlSi10Mg Alloy

Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting

Effect of process parameters on microstructures and properties of Al-42Si alloy fabricated by selective laser melting

Simultaneous Enhancement of Strength, Ductility, and Hardness of TiN/AlSi10Mg Nanocomposites Via Selective Laser Melting