Experimental Investigation on Effect of Cross-Flow Reynolds Number on Film Cooling Effectiveness

Lin Ye,Cun-liang Liu,Hui-ren Zhu,Jian-xia Luo

DOI: https://doi.org/10.2514/1.J057943

IF: 2.624

2019-01-01

AIAA Journal

Abstract:Film cooling effectiveness and discharge coefficient of cylindrical holes fed by different internal cross-flow channels with varying cross-flow Reynolds numbers Rec are investigated. Three cross-flow cases-a smooth case and ribbed cases with 135-deg ribs and 45-deg ribs-are studied at three blowing ratios M and two Rec. Film cooling effectiveness contours are obtained by the transient liquid-crystal measurement technique. For the smooth case and 45-deg case, the asymmetrical vortex is more pronounced with increasing cross-flow direction velocity, resulting in more skewed film coverage at M=0.5 and Rec=100,000. Helical motion within the film hole for the 45-deg case is more violent. On the contrary, laterally symmetric film-coverage contours are displayed for the 135-deg case, and the film cooling effectiveness at Rec=100,000 decreases slowly as flowing downstream. The influence of Rec on lateral distribution is greater at M=1.0. The lateral spread of film coverage at Rec=100,000 is wider than that at Rec=50,000. At M=2.0, there is almost no film coverage in the downstream region at Rec=50,000. The jet is relatively attached greater to the surface, thus producing positive influence on the film cooling effectiveness at Rec=100,000. The hole-exit velocity contour on the -Y side mainly affects film coverage. The discharge coefficient increases as M increases. The 45-deg case is the lowest, whereas the 135-deg case is the highest.