Abstract:This study presents a backside loading design inductive tactile sensor with the monolithic integration of thermometer. Based on the commercially available standard complementary metal-oxide-semiconductor (CMOS) process (the TSMC <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$0.35\mu \text{m}$ </tex-math></inline-formula> 2P4M CMOS process) and the in-house post CMOS processes, the sensing chip is designed and implemented. The electrical connection is further achieved by using the flip-chip bonding process, and hence the breakage of bonding wires by the tactile load can be avoided. The CMOS sensing chip consists of the magnetic sensing coil and the polysilicon RTD (resistive thermal detector). Moreover, a cavity is defined on the backside (silicon substrate) of CMOS chip to act as a mold for the polymer filler as well as the housing for the chrome steel ball contact interface. The tactile force will cause the polymer deformation and chrome steel ball displacement, and further lead to the magnetic flux change on the sensing coil. Thus, the tactile force is detected by the inductance variation of magnetic sensing coil on the CMOS chip. Moreover, the temperature variation is detected by the resistance change of RTD thermometer, and the in-situ temperature monitoring during tactile loading is achieved. The force response of the proposed tactile sensor and the temperature response of the thermometer have been characterized. The influence of temperature variation on the tactile sensor has also been calibrated. Moreover, the characteristics of the thermometer on sensing chip at different contact conditions are also investigated.

On the detection interfaces for inductive type tactile sensors

A Novel Inductive Technique for Microcantilever Displacement Detection

Inductive Micro Tri-Axial Tactile Sensor Using a CMOS Chip with a Coil Array

New C4D Sensor with a Simulated Inductor

Molding/Encapsulation/Integration Approach for Tactile-Bump And Sensing-Interface of Inductive Tactile Sensor

A Novel Tactile Sensor with Electromagnetic Induction and Its Application on Stick-Slip Interaction Detection

Development of CMOS MEMS inductive type tactile sensor with the integration of chrome steel ball force interface

A NOVEL POLYMER FILLED CMOS-MEMS INDUCTIVE-TYPE TACTILE SENSOR WITH WIRELESS SENSING CAPABILITY

Development of the Backside Loading Inductive Tactile Force Sensor Using the Flip-Chip Bonding of CMOS Sensing Chip

A Dual Spiral-Coils Tactile Sensor with Novel Driving Modes for Inductive Force and Capacitive Proximity Sensing

Development of a Compliant Magnetic 3-D Tactile Sensor with AMR Elements.

A CMOS-MEMS Electromagnetic-Type Tactile Sensor with Polymer-Filler and Chrome-Steel Ball Sensing Interface

Flip-Chip Integration of Inductive CMOS Tactile Sensor with Si Cavity for Polymer-Filler/Metal-Ball Sensing Interface

MONOLITHIC/VERTICAL INTEGRATION OF PIEZO-RESISTIVE TACTILE SENSOR AND INDUCTIVE PROXIMITY SENSOR USING CMOS-MEMS TECHNOLOGY

Flexible Centralized Tri-Axis Force Sensor based on Capacitance and Intrinsic Resistance of Bump Structure

Integration of Stainless-Steel Tactile Bump with Inductive Tactile Sensor Array for 3D Micro Joystick Button Application

High Sensitivity and Wide Range Soft Magnetic Tactile Sensor Based on Electromagnetic Induction

CMOS Chip for Solid-State Tactile Force Sensor

A tactile sensor based on magneto-sensitive elastomer to determine the position of an indentation

Halbach-Array Magnetic Coil Arrangement on CMOS Chip for Sensitivity Enhancement of Inductive Tactile Sensor