Abstract:Aerial recovery and redeployment can effectively increase the operating radius and the endurance of unmanned aerial vehicles (UAVs). However, the challenge lies in the effect of the aerodynamic force on the recovery system, and the existing road-based and sea-based UAV recovery methods are no longer applicable. Inspired by the predatory behavior of net-casting spiders, this study introduces a cable-driven parallel robot (CDPR) for UAV aerial recovery, which utilizes an end-effector camera to detect the UAV's flight trajectory, and the CDPR dynamically adjusts its spatial position to intercept and recover the UAV. This paper establishes a comprehensive cable model, simultaneously considering the elasticity, mass, and aerodynamic force, and the static equilibrium equation for the CDPR is derived. The effects of the aerodynamic force and cable tension on the spatial configuration of the cable are analyzed. Numerical computations yield the CDPR's end-effector position error and cable-driven power consumption at discrete spatial points, and the results show that the position error decreases but the power consumption increases with the increase in the cable tension lower limit (CTLL). To improve the comprehensive performance of the recovery system, a multi-objective optimization method is proposed, considering the error distribution, power consumption distribution, and safety distance. The optimized CTLL and interception space position coordinates are determined through simulation, and comparative analysis with the initial condition indicates an 83% reduction in error, a 62.3% decrease in power consumption, and a 1.2 m increase in safety distance. This paper proposes a new design for a UAV aerial recovery system, and the analysis lays the groundwork for future research.

A New Concept Of Uav Recovering System

ADRC Methodology for a Quadrotor UAV Transporting Hanged Payload

Research of key technologies for multi-rotor UAV automatic aerial recovery system

Design and Optimization of UAV Aerial Recovery System Based on Cable-Driven Parallel Robot

Recover a Moving Rotor UAV Without Ground-Air Communications: System and Control of a Dual-Stage Tracking Device

Research on recovery technology of ship-borne fixed-wing UAV

Model-Reference Reinforcement Learning for Safe Aerial Recovery of Unmanned Aerial Vehicles

Improved Digital Model of Parafoil-Unmanned Aerial Vehicle Accurate Recycling System

Autonomous Recovery System of Aerial Child-Mother Unmanned Systems Based on Visual Positioning

Air-recovery Method of Unmanned Aerial Vehicles Swarm with Lower Speed Based on Backstepping

An Active Landing Recovery Method for Quadrotor UAV: Localization, Tracking and Buffering Landing

Trajectory Planning and Control Design for Aerial Autonomous Recovery of a Quadrotor

A UAV Autonomous Landing System Integrating Locating, Tracking, and Landing in the Wild Environment

A Vision-based UAV Tracker Aiming at Aerial Targets

Ground Automatic Recycling System for UAVs in the Wild

Cooperative Path Planning for Aerial Recovery of a UAV Swarm Using Genetic Algorithm and Homotopic Approach

Control System Architecture for Automatic Recovery of Fixed-Wing Unmanned Aerial Vehicles in a Moving Arrest System

A Visual Navigation Framework for the Aerial Recovery of UAVs

The kinetic and dynamic characteristic of a high-speed UAV recovery system

A Novel Analytical Recovery Controller for Autonomous Underwater Vehicles

Panoramic UAV Surveillance and Recycling System Based on Structure-Free Camera Array.