Abstract:Micro Air Vehicles (MAVs) designed for reconnaissance and difficult to reach missions have excellent potential utility and are of interest for military and civilian applications as flight platforms for optical, acoustic, electronic and chemical sensors for operation in hazardous sites with aerial access. They are autonomous or semiautonomous airborne vehicles, measuring less than 200 meters in any dimension and weighing about 150 grams, accomplishing a useful mission at an affordable cost. Nominal performance goals include real-time imaging, navigation, and communications capabilities, a range of up to 5 kilometers, and a top speed of up to 60 kph, during missions lasting 10 mins to 1 hrs. MAVs may be regarded as six-degree-of-freedom sensor platforms that will enable a broad spectrum of small-unit and special operations. There are two prominent features of MAVs flight: (i) low operating Reynolds number (Re: 10(4)-10(5)), resulting in unfavorable aerodynamic conditions to support controlled flight, and (ii) small physical dimensions, resulting in certain favorable scaling characteristics including structural strength, reduced stall speed, and low inertia. Owing to the low Reynolds number, the aerodynamic performance of all lifting surfaces is degraded. The small scales and speeds also mean that atmospheric turbulence has a severe effect, and small thermal cycle engines that could profit from the high energy densities of fossil fuels are unavailable. It is thus difficult to obtain good flight performance.As the rapid development of microelectronics and Microelectromechanical systems (MEMS) technology, MAVs become a feasible concept. MEMS are extremely small machines in which electronic and mechanical components are combined on a single silicon chip using micromachining techniques. Development of Low Reynolds number aerodynamics design and MEMS-based autopilot system techniques are the near term object. Progresses in sensor, in control and in navigation technologies offer completely new opportunities. This paper deals with MAVs, which are the flying carriers of these advanced sensors. The developments of MAVs around the world, particularly on potential applications, wing model concepts, and onboard avionics, are reviewed at first. The bottleneck and the current situation for the integrated navigation, guidance and control system design in MAVs are then analyzed. The question of whether MEMS can help improve the performance of futuristic MAVs is also pondered.

A Bionics-Based Recovery Strategy for Micro Air Vehicles.

Collision-Aware Navigation for Flapping-Wing Aerial Robots in Dense Environments

A Vortex-Ring-state-avoiding Descending Control Strategy for Multi-Rotor UAVs

Research of key technologies for multi-rotor UAV automatic aerial recovery system

A Tactile Feedback Approach to Path Recovery after High-Speed Impacts for Collision-Resilient Drones

Air Bumper: A Collision Detection and Reaction Framework for Autonomous MAV Navigation

Robust Vision-based Obstacle Avoidance for Micro Aerial Vehicles in Dynamic Environments

Biomimetic Design for Unmanned Aerial Vehicle Safe Landing in Hazardous Terrain

Toward Impact-resilient Quadrotor Design, Collision Characterization and Recovery Control to Sustain Flight after Collisions

On-board Communication-based Relative Localization for Collision Avoidance in Micro Air Vehicle teams

MAVFI: An End-to-End Fault Analysis Framework with Anomaly Detection and Recovery for Micro Aerial Vehicles

Autonomous Landing Strategy for Micro-UAV with Mirrored Field-of-View Expansion

A self-recovery mechanism for quadrotors

Onboard Integrated Avionics And Sensors For Assisting Mavs Missions

Demo Abstract: Bio-inspired Tactile Sensing for MAV Landing with Extreme Low-cost Sensors

On the design and development of attitude stabilization, vision-based navigation, and aerial gripping for a low-cost quadrotor

Aggressive Visual Perching with Quadrotors on Inclined Surfaces

Dynamic Modeling and Analysis of Impact-resilient MAVs Undergoing High-speed and Large-angle Collisions with the Environment

Modeling and Control of an Omnidirectional Micro Aerial Vehicle Equipped with a Soft Robotic Arm

Impact Absorbing and Compensation for Heavy Object Catching with an Unmanned Aerial Manipulator

Autonomous Landing of a Multirotor Micro Air Vehicle on a High Velocity Ground Vehicle