Abstract:This article presents a research study on the process analysis of adiabatic liquid desiccant dehumidification/regeneration with slug flow assumptions. A controlling equation is developed for the quasi-equilibrium processes where the two fluid streams are in contact in quasi-equilibrium conditions. Results from this equation with numerical integration for the solution are presented as process curves on a psychrometric chart. Two of these curves are found to be characteristic of two typical types of adiabatic dehumidification/regeneration processes: one featured with small enthalpy change of air and low mass flow of solution (type-1) and the other with small concentration change and high mass flow of solution (type-2). These two types of process curves are thus named as characteristic process curves. Numerical simulations of one-dimensional heat and mass transfer model under practical conditions were also performed. With special inlet conditions and approximately balanced heat and mass capacity conditions, the loci of states for the two fluid streams will still proceed approximately along the same characteristic process curves. Under other inlet conditions, the characteristic process curves still function as asymptotic limits for the real processes. Thus, the research presented in this article provides an in-depth understanding of the complicated heat and mass transfer processes and also a theoretical basis for further development of simplified and precise enough algorithm of heat and mass transfer calculations.

Comparison of Internally Cooled and Adiabatic Liquid Desiccant Dehumidification-Regeneration System

Analysis of a Hybrid System of Adiabatic Absorption two-stage Liquid Desiccant and CO2 Transcritical Cycles

Performance Analysis on the Internally Cooled Dehumidifier Using Liquid Desiccant

Performance Comparison of Three Typical Types of Internally-Cooled Liquid Desiccant Dehumidifiers

A view on the performance comparison between adiabatic and internally-cooled dehumidification processes using liquid desiccant

Experimental Analysis of an Internally-Cooled Liquid Desiccant Dehumidifier

RESEARCH ON THE HEAT AND MASS TRANSFER PERFORMANCE AND FLOW-PATI'ERN COMPARISON OF THE INTERNALLY-COOLED LIQUID DESICCANT DEHUMIDIFIERS

Model-based Investigation of a Heat Pump Driven, Internally Cooled Liquid Desiccant Dehumidification System

Performance Comparison and Exergy Analysis of Different Flow Types in Internally-Cooled Liquid Desiccant Dehumidifiers (Icds)

Analytical Solution of Heat and Mass Transfer Process in Internally Cooled Liquid Desiccant Dehumidifiers Using Refrigerant As Cooling Medium

Heat and Mass Transfer Analysis and Performance Comparison for Different Solid Dehumidification Methods

Performance of Heat Pump Driven Internally Cooled Liquid Desiccant Dehumidification System

Match Properties of Heat and Mass Transfer Processes in the Internally-Cooled Liquid Desiccant System

On the Importance of the Heat and Mass Transfer Driving Force Reversal and Heat-Cold Offset in Internally-Cooled Liquid-Desiccant System

Review of Internally Cooled Liquid Desiccant Air Dehumidification: Materials, Components, Systems, and Performances

Coupled Heat and Mass Transfer Characteristic in Packed Bed Dehumidifier/regenerator Using Liquid Desiccant

A characteristic study of liquid desiccant dehumidification/regeneration processes

Ideal Efficiency Analysis and Comparison of Condensing and Liquid Desiccant Dehumidification

An Experimental Study on the Dehumidification Performance of a Counter Flow Liquid Desiccant Dehumidifier

Numerical Simulation On The Performance Of Regenerator In Liquid Desiccant Air Conditioning Systems

Experimental Study on Mass Transfer Performances of Cross Flow Dehumidifier Using Liquid Desiccant