Abstract:Underground rock is often subjected to the coupled action of acid sulfate, chloride ion corrosion, and external dynamic disturbance: the degree of corrosion and dynamic load can significantly affect the pore structure and mechanical behavior of rock. To quantify the microscopic pore structure changes and macro-dynamic behavior characteristics of acidified corroded sandstone, first, a mixed acidic solution of NaHSO4 and HCl with different pH values was used for immersion corrosion of sandstone; second, the pore structure of sandstone before and after corrosion was quantitatively evaluated by nuclear magnetic resonance (NMR), dynamic loading tests of corroded sandstone were conducted on an SHPB experimental system and scanning electron microscopy (SEM) was used to observe the morphology of corroded sandstone section; and finally, the mechanism of water–rock interaction and damage and fracture of acid-corroded sandstone were analyzed. The results show that, after acidizing corrosion of sandstone, the macropores increase significantly in number and volume, the boundary of the pore structure tends to be fuzzy; the effective porosity, the number of effective pores, and the total porosity increase significantly; the residual porosity, the number of residual pores, and T2 cut-off value decrease. The proportion accounted for by the elastic stage in stress–strain curves of corroded sandstone is lowered; the proportion accounted for by the plastic yield stage is increased; and post-peak rebound is diminished. With the decrease of pH value, the peak stress on acid-corroded sandstone decreases and the peak strain increases. The peak stress on corroded sandstone is negatively correlated with effective porosity and the number of effective pores, but positively correlated with residual porosity, the number of residual pores, and the T2 cut-off value. The reaction of acidic solution with sandstone minerals causes the free fluid space to increase, the bound fluid space decreases, and the number of pores increases, resulting in a decrease in the dynamic strength of acidified sandstone. The fracture of original sandstone after impact failure has no obvious directionality, and the failure mode of grain is the coexistence of intergranular fracture and trans-granular fracture. The fracture of sandstone after acidizing corrosion is obviously directional after impact damage, and the fracture form is single, which is intergranular fracture. The research results can provide a certain reference for the protection of rock engineering under acidic water chemical environment.

Experimental Investigations On Pore Structure And Mechanical Properties Of Sandstone Subjected To Chemical Corrosion

Influence of Chemical Corrosion on Pore Structure and Mechanical Properties of Sandstone

Weakening Laws of Mechanical Properties of Sandstone under the Effect of Chemical Corrosion

Damage evolution behavior and constitutive model of sandstone subjected to chemical corrosion

Effects of Acid Sulfate and Chloride Ion on the Pore Structure and Mechanical Properties of Sandstone Under Dynamic Loading

The damage mechanism and deterioration characteristics of acid-corroded sandstone: an experimental study

Experimental study on dynamic mechanical properties of chemically corroded sandstone

Investigation of the Degradation Mechanism of the Tensile Mechanical Properties of Sandstone under the Corrosion of Various Ph Solutions

Mechanism of Damage and Deterioration of Red Sandstone in South China under Different pH Treatments

Mechanical properties and damage constitutive model of sandstone after acid corrosion and high temperature treatments

Mechanical Responses of Chemically Corroded Sandstone under Cyclic Disturbance: Insights from Fatigue Properties and Macro-Micro Fracturing Mechanism

Macro-meso deterioration characteristics and statistical damage constitutive model for acid-corroded sandstone

Experimental Investigation on Microstructure and Surface Morphology Deterioration of Limestone Exposed on Acidic Environment

Effect of Chemical Corrosion and Axial Compression on the Dynamic Strength Degradation Characteristics of White Sandstone under Cyclic Impact

Micro-damage Evolution and Macro-Mechanical Property Degradation of Limestone Due to Chemical Effects

Combined effects of freeze–thaw cycles and chemical corrosion on triaxial mechanical properties of sandstone

Influence of acidic environment on damage mechanism of sandstone under different climatic temperatures

Effects of high temperature and acidic solutions on the pore characteristics and mechanical properties of sandstone

Experimental investigation on the damage and deterioration of sandstone subjected to cycling pore water pressure

The Effect of Chemical Erosion on Mechanical Properties and Fracture of Sandstone under Shear Loading: an Experimental Study.

Study on the Effect of Dry–Wet Cycles on Dynamic Mechanical Properties of Sandstone Under Sulfuric Acid Solution