Abstract:Piles are generally an effective way to reduce the risk of slope failure. However, previous approaches for slope stability analysis did not consider the effect of the piles coupled with the decrease of the water level（drawdown）. In this study, a series of centrifuge model tests was performed to understand the deformation and failure characteristics of slopes reinforced with various pile layouts. In the centrifuge model tests, the pile-reinforced slopes exhibited two typical failure modes under drawdown conditions:across-pile failure and through-pile failure. In the through-pile slope failure, a discontinuous slip surface was observed, implying that the assumption of the slip surface in previous stability analysis methods was unreasonable. The test results showed that drawdown led to instability of the piles in cohesive soil, as the saturated cohesive soil failed to provide sufficient constraint for piles. The slope exhibited progressive failure, from top to bottom, during drawdown. The deformation of the piles was reduced by increasing the embedment depth and row number of piles. In addition, the deformation of soils outside the piles was influenced by the piles and showed a similar distribution shape as the piles, and the similarity degree weakened as the distance from the piles increased. This study also found that the failure mechanism of unreinforced and pile-reinforced slopes induced by drawdown could be described by coupling between the deformation localization and local failure, and it revealed that pile-reinforced slopes could reduce slope deformation localization during drawdown.

Failure behavior of soil-rock mixture slopes based on centrifuge model test

Centrifuge Model Test Study on Failure Behavior of Soil Slopes Overlying the Bedrock

Centrifuge modeling of failure behavior of pile-reinforced slope

Centrifuge Modeling of the Progressive Failure of A Soil Slope under Cyclic Loading Conditions

Centrifuge Modeling of Rock Slopes Susceptible to Block Toppling

Investigation of effect of rock content on dynamic response and failure characteristics of soil–rock mixture slope using large-scale shaking table test

Centrifuge Model Test on Excavation-Induced Failure of Soil Slopes Overlying Bedrock

Centrifuge Model Tests on Ecologically Reinforced Soil Slopes Under Vertical Loading

Centrifuge Modeling of Rainfall-Induced Failure Process of Soil Slope

Effects of Extreme Drought-Rainfall on Slope Failure Mechanisms: Centrifuge Modelling

Behaviour and Mechanism of Failure Process of Soil Slopes

Block Reinforcement Behavior and Mechanism of Soil Slopes

Centrifugal Model Tests on Failure of Silty Slopes Induced by Change of Water Level

Analysis of the effect of the loading path on the failure behaviour of slopes

Progressive Failure Behavior and Mechanism of Soil Slopes under Dynamic Loading Conditions

Centrifuge Modeling Of Progressive Failure Of Soil Slope

Centrifuge model test on failure of soil slope under drawdown of water level

Centrifuge modelling of rainfall-induced slope failure in variably saturated soil

Centrifuge Modeling of Soil Slopes Overlying Bedrock under Excavation Conditions

Centrifuge Model Tests on Pile-Reinforced Slopes Subjected to Drawdown

On the Cyclic Failure Mechanism of Soil Slopes