Abstract:Numerical simulation is an effective method to study the heat transfer of fabric. However, the interlaced structure of the woven fabric deforms warp yarns and weft yarns to varying degrees, so it is not easy to obtain an effective model of the fabric and the effective thermophysical parameters of the yarns. In addition, at a high temperature, the anisotropy and temperature-dependent property of the thermal conductivity of the yarn also need to be considered. Therefore, this work established a transient heat transfer simulation model based on the effective woven fabric structure and the effective thermophysical parameters of yarns to study the heat transfer processes of three kinds of high-temperature-resistant inorganic fiber (quartz fiber, high-silica glass fiber and basalt fiber) fabrics at different temperatures (especially high temperature). The fabrics were embedded in epoxy resin and made into slices, and then cross-sectional slices of the woven fabrics were observed through a three-dimensional microscope to construct the fabric geometric models. Taking into account the influence of warp yarn and weft yarn deformations in the fabric structure on the fiber volume fractions and the anisotropic and temperature-dependent property of thermal conductivities of the yarns, the thermophysical parameters of warp yarns and weft yarns in the woven fabrics were optimized. Then the fabrics were simulated for transient heat transfer at different temperatures (373.15, 573.15 and 773.15 K). The simulation results were verified through experiments. The good correlation between the two results proved the effectiveness of the simulation method.

Numerical simulation of heat and moisture transfer in fibrous porous media dehydration process with ultrasound assisted

Research progress of numerical simulation on heat and moisture transfer in porous textiles

Numerical Simulation for Tortuosity of Porous Media

A Numerical Simulation on Heat Transfer of Fabric Based on the Yarn Interweaved Structure

Simulation of Heat Transfer Through Woven Fabrics Based on the Fabric Geometry Model

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

Simulation and experimental study of heat-moisture-solute transfer during drying process of porous media

Changes in micropore structure and moisture transport properties in fibrous porous media after ultrasound treatment

Mass-Transfer Simulation Software Study of Sliced Porous Production During Convection Drying Process

Effect of heat and mass transfer coefficients on force convective drying of porous media

Numerical Simulation of Heat, Air, and Moisture Transfer Through a Wall of Porous Media

Numerical simulation of the freezing process of concrete

Heat and Mass Transfer with Condensation in Non-Saturated Porous Media

Numerical simulation of the transport phenomena due to sudden heating in porous media

Analysis and simulation of the coupled mass and heat transfer in the process of moisture exchange across a membrane

Numerical simulation of heat transfer and phase change during freezing of potatoes with different shapes at the presence or absence of ultrasound irradiation

Numerical simulation of natural convective heat and mass transfer in porous media

Numerical and experimental investigation of convective drying in unsaturated porous media with bound water

Numerical simulation and experiment verified for heat transfer processes of high-property inorganic fiber woven fabrics

Simulation investigation of the effect of heating temperature and porosity of porous media on the water evaporation process

A Thermo-Hydro-Mechanics Bidirectional Coupling Mathematical Model for Drying of Biological Porous Medium