Abstract:Sm-doped Li4Ti5O12 (LTO) in the form of Li4-x/3Ti5-2x/3SmxO12 (x = 0, 0.01, 0.03, 0.05 and 0.10) is synthesized successfully by a simple solid-state reaction in air. XRD analysis and Rietveld refinement demonstrate that traces of the doped Sm3+ ions have successfully entered the lattice structure of the bulk LTO and the Sm doping does not change the spinel structure of LTO. However, of interest is that the lattice parameter increases gradually with the increase of the Sm doping amount, which is potentially beneficial for intercalation and de-intercalation of lithium ions. XPS results further identify the existence of Ti3+ ions and the transition of a small quantity of Ti ions from Ti4+ to Ti3+, which will improve the conductivity of LTO. All materials are well crystallized with a uniform and narrow size distribution in the range of 0.5-1.2 mu m. The results of electrochemical measurement reveal that the Sm doping can improve the rate capability and cycling stability of LTO. Among all samples, Li4-x/3Ti5-2x/3SmxO12 (x = 0.03) exhibits the best electrochemical properties. The specific capacities of the Li4-x/3Ti5-2x/3SmxO12 (x = 0.03) sample at charge and discharge rates of 5C and 10C are 131.1 mA h g(-1) and 119.2 mA h g(-1), respectively, compared with 64 mA h g(-1) (5C) and 47 mA h g(-1) (10C) for the pristine LTO in the potential range 1.0-2.5 V (vs. Li/Li+). This result can be attributed to Li4-x/3Ti5-2x/3SmxO12 (x = 0.03) with a diffusion coefficient of 1.3 x 10(-12) cm(2) s(-1), which is higher than the 7.4 x 10(-14) cm(2) s(-1) for the LTO electrode without Sm doping. In the meantime, the discharge capacity of Li4-x/3Ti5-2x/3SmxO12 (x = 0.03) can still reach 125.1 mA h g(-1) even after 100 cycles and maintain 95.2% of its initial discharge capacity at 5C. Therefore, Sm doping has a great impact on discharge capacity, rate capability and cycling performance of LTO anode materials for lithium-ion batteries.

Endowing LiTi2(PO4)3/C with excellent electrochemical performances through rational crystal doping

Cl− Doping Strategy to Boost the Lithium Storage Performance of Lithium Titanium Phosphate

Enhanced high-rate performance of Br-doping Li4Ti5O12 microspheres as anode materials for lithium-ion batteries

Doping the Li4Ti5O12 lattice with extra-large anions

K doping on Li site enables LiTi2(PO4)3/C excellent lithium storage performance

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Chlorine Doping Enables NaTi2(PO4)3/C Excellent Lithium Ion Storage Performance in Aqueous Lithium Ion Batteries

Boosting the performance of LiTi2(PO4)3/C anode for aqueous lithium ion battery by Sn doping on Ti sites

Nitridation Br-doped Li 4 Ti 5 O 12 anode for high rate lithium ion batteries

Improved Cycling Performance of Cation-Disordered Rock-Salt Li1.2Ti0.4Mn0.4O2 Cathode through Mo-Doping and Al2O3-Coating

Effect of Cr doping on Li2ZnTi3O8 as alternative anode material to enhance electrochemical properties of lithium-ion batteries

Structure and electrochemical properties of Sm-doped Li4Ti5O12 as anode material for lithium-ion batteries

Effect of Sn doping on the electrochemical performance of NaTi 2 (PO 4 ) 3 /C composite

Electrochemical Performance of Zr-doped Li3V2(PO4)3/C Composite Cathode Materials for Lithium Ion Batteries

Sol–gel Preparation and Electrochemical Properties of La-doped Li4Ti5O12 Anode Material for Lithium-Ion Battery

Effect of Zr4+ doping on the morphological features and electrochemical performance of monoclinic Li3V2(PO4)3/C cathode material synthesized by an improved sol-gel combustion technique

Synthesis and electrochemical properties of Na-doped LiTi2(PO4)3@carbon composite as anode for aqueous lithium ion batteries

The Synergic Effects of Ca and Sm Co-Doping on the Crystal Structure and Electrochemical Performances of Li4-xCaxTi5-xSmxO12 Anode Material

Enhanced Electrochemical Performance of Ti-Doping Li1.15Ni0.47Sb0.38O2 As Lithium-excess Cathode for Lithium-ion Batteries

Improving electrochemical performances of Lithium-rich oxide by cooperatively doping Cr and coating Li3PO4 as cathode material for Lithium-ion batteries

Improving electrochemical performances of Lithium-rich oxide by cooperatively doping Cr and coating Li<sub>3</sub>PO<sub>4</sub> as cathode material for Lithium-ion batteries