Recent advances in formic acid electro-oxidation: from the fundamental mechanism to electrocatalysts

Zhongying Fang,Wei Chen

DOI: https://doi.org/10.1039/d0na00803f

IF: 5.598

2021-01-01

Nanoscale Advances

Abstract:This review summarizes the recent advances of studies on formic acid electro-oxidation, including the reaction mechanism and the electrocatalysts used.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry

What problem does this paper attempt to address?

Structural Designs and Mechanism Insights into Electrocatalytic Oxidation of 5-Hydroxymethylfurfural

Jing Lei,Huijie Zhang,Jian Yang,Jia Ran,Jiqiang Ning,Haiyan Wang,Yong Hu

DOI: https://doi.org/10.1016/j.jechem.2024.08.066

IF: 13.1

2024-01-01

Journal of Energy Chemistry

Abstract:Biomass conversion offers an efficient approach to alleviate the energy and environmental issues. Electrochemical oxidation of 5-hydroxymethylfurfural (HMF) has attracted tremendous attention in the latest few years for the mild synthesis conditions and high conversion efficiency to obtain 2,5-furan dicarboxylic acid (FDCA), but there still remain problems such as limited yield, short cycle life, and ambiguous reaction mechanism. Despite many reviews highlighting a variety of electrocatalysts for electrochemical oxidation of HMF, a detailed discussion of the structural modulation of catalyst and the underlying catalytic mechanism is still lacking. We herein provide a comprehensive summary of the recent development of electrochemical oxidation of HMF to FDCA, particularly focusing on the mechanism studies as well as the advanced strategies developed to regulate the structure and optimize the performance of the electrocatalysts, including heterointerface construction, defect engineering, single-atom engineering, and in situ reconstruction. Experimental characterization techniques and theoretical calculation methods for mechanism and active site studies are elaborated, and challenges and future directions of electrochemical oxidation of HMF are also prospected. This review will provide guidance for designing advanced catalysts and deepening the understanding of the reaction mechanism beneath electrochemical oxidation of HMF to FDCA.
Recent advances in designing efficient electrocatalysts for electrochemical carbon dioxide reduction to formic acid/formate

Yixin Zhang,Fulin Li,Jing Dong,Kaichao Jia,Tingting Sun,Lianbin Xu

DOI: https://doi.org/10.1016/j.jelechem.2022.117018

IF: 4.598

2023-01-01

Journal of Electroanalytical Chemistry

Abstract:Electrochemical reduction of carbon dioxide (CO2) into high-value fuels and chemical feedstocks has emerged as a potential approach to achieve carbon neutrality and address the climate crisis caused by massive CO2 emissions. In this review, the recent research progress of highly efficient electrocatalysts for the electrochemical conversion of CO2 to formic acid or formate is summarized. For a more direct and comprehensive introduction to the properties of high-performance electrocatalysts, this review mainly focuses on the following four types of catalysts, including nanostructured catalysts, single atom catalysts, doped or alloyed catalysts, and supported catalysts. Meanwhile, the synthetic strategies and theoretical designs of the catalysts for improving the Faradaic efficiency (FE), current density, and stability of the electrochemical CO2 reduction reaction (CO2RR) are also discussed. Finally, the current challenges and further perspectives of the electrocatalysts for electrochemical CO2RR are summarized.

chemistry, analytical,electrochemistry
Metal-based Electrocatalytic Conversion of CO2 to Formic Acid/formate

Peng Ding,Haitao Zhao,Tingshuai Li,Yongsong Luo,Guangyin Fan,Guang Chen,Shuyan Gao,Xifeng Shi,Siyu Lu,Xuping Sun

DOI: https://doi.org/10.1039/d0ta08393c

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:This review summarizes recent progress in the development of metal-based electrocatalysts for the reduction of CO2 to formic acid/formate. The current challenges and the future research directions of metal-based materials are also proposed.
Electrocatalytic Oxidation of Formic Acid: Closing the Gap Between Fundamental Study and Technical Applications

Hongrae Jeon,Beomgyun Jeong,Jiyong Joo,Jaeyoung Lee

DOI: https://doi.org/10.1007/s12678-014-0226-x

2014-09-18

Electrocatalysis

Abstract:Electro-catalytic oxidation of formic acid has a significant importance in fundamental research of small organic molecule oxidation, as well as practical application to fuel cells. Notwithstanding intensive research efforts for last couple of decades, there are still fundamental questions in debate on the mechanistic origin. This perspective presents underlying issues in the electro-catalytic oxidation of formic acid. Until now, the oxidation mechanism of formic acid is not fully understood in spite of its importance of this work, since the role of adsorbed formate is not clearly identified. In addition, we will discuss on the role of Bi on Pt that unambiguously enhances the activity of Pt in fuel cell systems but is in debate with single crystal Pt surface. We finally accentuate the causes of the deactivation of Pd catalysts, because the utilization of non-Pt electrocatalysts could be one of the key researches for cost reduction of fuel cell systems. Thus, we intend to introduce different views toward formic acid oxidation proposed by the other researchers and provide perspectives on the further research to close the gap between fundamental study and technical applications.

chemistry, physical,electrochemistry
Electrocatalysis of formic acid on palladium and platinum surfaces: from fundamental mechanisms to fuel cell applications.

Kun Jiang,Han-Xuan Zhang,Shouzhong Zou,Wen-Bin Cai

DOI: https://doi.org/10.1039/c4cp03151b

IF: 3.3

2014-01-01

Physical Chemistry Chemical Physics

Abstract:Formic acid as a natural biomass and a CO2 reduction product has attracted considerable interest in renewable energy exploitation, serving as both a promising candidate for chemical hydrogen storage material and a direct fuel for low temperature liquid fed fuel cells. In addition to its chemical dehydrogenation, formic acid oxidation (FAO) is a model reaction in the study of electrocatalysis of C1 molecules and the anode reaction in direct formic acid fuel cells (DFAFCs). Thanks to a deeper mechanistic understanding of FAO on Pt and Pd surfaces brought about by recent advances in the fundamental investigations, the " synthesis-by-design" concept has become a mainstream idea to attain high-performance Pt-and Pd-based nanocatalysts. As a result, a large number of efficient nanocatalysts have been obtained through different synthesis strategies by tailoring geometric and electronic structures of the two primary catalytic metals. In this paper, we provide a brief overview of recent progress in the mechanistic studies of FAO, the synthesis of novel Pd-and Pt-based nanocatalysts as well as their practical applications in DFAFCs with a focus on discussing studies significantly contributing to these areas in the past five years.
Metal-based electrocatalytic conversion of CO<sub>2</sub> to formic acid/formate

Peng Ding,Haitao Zhao,Tingshuai Li,Yongsong Luo,Guangyin Fan,Guang Chen,Shuyan Gao,Xifeng Shi,Siyu Lu,Xuping Sun

DOI: https://doi.org/10.1039/d0ta08393c

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:This review summarizes recent progress in the development of metal-based electrocatalysts for the reduction of CO2 to formic acid/formate. The current challenges and the future research directions of metal-based materials are also proposed.
Progress in Catalysts for Formic Acid Production by Electrochemical Reduction of Carbon Dioxide

Yuqi Ma,Rui Xu,Xiang Wu,Yilong Wu,Lei Zhao,Guizhi Wang,Fajun Li,Zhisheng Shi

DOI: https://doi.org/10.1007/s41061-024-00487-4

2024-12-05

Topics in Current Chemistry

Abstract:Utilising renewable energy to drive the conversion of carbon dioxide into more valuable products can effectively alleviate the energy crisis and protect the environment while actively responding to the policy of "carbon peaking and carbon neutrality". Additionally, formic acid/formate is one of the most promising and commercially valuable products of the electrocatalytic CO 2 reduction reaction (ECO 2 RR) as well as a nonhazardous material for hydrogen storage. With the continuous progress in the field of electrocatalytic CO 2 reduction to formic acid/formate (ECO 2 RF), various electrocatalysts with excellent performance have been developed. In this paper, first, the reaction mechanism of ECO 2 RF is briefly summarised, and then the recent research progress for various catalysts for ECO 2 RF, including metal-based catalysts, carbon-based material catalysts, metal–organic framework catalysts, covalent organic framework catalysts, and molecular catalysts, is reviewed. Finally, the current challenges and future perspectives of ECO 2 RF are discussed and presented.

chemistry, multidisciplinary
Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cells – Part I – Fundamentals and Pd Based Catalysts

SK Safdar Hossain,Junaid Saleem,M. Mudassir Ahmad Alwi,Faisal A. Al‐Odail,Mohammad Mozahar Hossain

DOI: https://doi.org/10.1002/tcr.202200045

2022-06-23

Abstract:Formic acid fuel cell is unique because it can be coupled with electrochemical reduction of carbon dioxide to achieve a carbon neutral energy source. Formic acid oxidation takes place over the palladium based anode catalysts. In this review, the recent advances in palladium‐based anode electrocatalysts for formic acid oxidation have been discussed. Direct formic acid fuel cells (DFAFCs) have gained immense importance as a source of clean energy for portable electronic devices. It outperforms other fuel cells in several key operational and safety parameters. However, slow kinetics of the formic acid oxidation at the anode remains the main obstacle in achieving a high power output in DFAFCs. Noble metal‐based electrocatalysts are effective, but are expensive and prone to CO poisoning. Recently, a substantial volume of research work have been dedicated to develop inexpensive, high activity and long lasting electrocatalysts. Herein, recent advances in the development of anode electrocatalysts for DFAFCs are presented focusing on understanding the relationship between activity and structure. This review covers the literature related to the electrocatalysts based on noble metals, non‐noble metals, metal‐oxides, synthesis route, support material, and fuel cell performance. The future prospects and bottlenecks in the field are also discussed at the end.
Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cell‐II‐Platinum‐Based Catalysts

SK Safdar Hossain,Muhammad Mudassir Ahmad Alwi,Junaid Saleem,Faisal Al‐Odail,Avijit Basu,Mohammad Mozahar Hossain

DOI: https://doi.org/10.1002/tcr.202200156

2022-09-15

Abstract:This review describes the recent findings on the mechanism of formic acid oxidation over Pt catalysts. Recent advances in the development of binary and ternary Pt‐based catalysts for FAO is presented to establish the structure and catalytic activity relationship. Platinum‐based catalysts have a long history of application in formic acid oxidation (FAO). The single metal Pt is active in FAO but expensive, scarce, and rapidly deactivates. Understanding the mechanism of FAO over Pt important for the rational design of catalysts. Pt nanomaterials rapidly deactivate because of the CO poisoning of Pt active sites via the dehydration pathway. Alloying with another transition metal improves the performance of Pt‐based catalysts through bifunctional, ensemble, and steric effects. Supporting Pt catalysts on a high‐surface‐area support material is another technique to improve their overall catalytic activity. This review summarizes recent findings on the mechanism of FAO over Pt and Pt‐based alloy catalysts. It also summarizes and analyzes binary and ternary Pt‐based catalysts to understand their catalytic activity and structure relationship.

chemistry, multidisciplinary
Recent Advances in Engineering Fe‐N‐C Catalysts for Oxygen Electrocatalysis in Zn‐Air Batteries

Le Li,Meijun Han,Penggang Zhang,Donglei Yang,Meng Zhang

DOI: https://doi.org/10.1002/cssc.202401186

IF: 8.4

2024-09-03

ChemSusChem

Abstract:Fe‐N‐C single‐atom catalysts (SACs) have emerged as one of the most promising candidates for oxygen electrocatalysis due to their maximized atom utilization efficiency, high intrinsic activity, and strong metal‐support interaction. Significant progress has been made in engineering Fe‐N‐C SACs for oxygen electrocatalysis in Zn‐air batteries (ZABs). This review provides a comprehensive overview of the recent advancements in Fe‐N‐C SACs, with a special focus on effective engineering strategies, their performance in oxygen electrocatalysis, and their potential applications in ZABs. The review also discusses the key challenges and future directions in the development of Fe‐N‐C SACs for efficient and durable oxygen electrocatalysis in ZABs. This review aims to offer valuable insights into the current state of research in this field and to guide future efforts in the development of advanced oxygen electrocatalysts for ZABs.

chemistry, multidisciplinary,green & sustainable science & technology
Advances in the Stability of Catalysts for Electroreduction of CO2 to Formic Acid

Dewen Song,Shipeng Zhang,Minjun Zhou,Mingwang Wang,Ruirui Zhu,Hui Ning,Mingbo Wu

DOI: https://doi.org/10.1002/cssc.202301719

IF: 8.4

2024-02-28

ChemSusChem

Abstract:The electroreduction of CO2 to high‐value products is a promising approach for achieving carbon neutrality. Among these products, formic acid stands out as having the most potential for industrialization due to its optimal economic value in terms of consumption and output. In recent years, the Faraday efficiency of formic acid from CO2 electroreduction has reached 90~100%. However, this high selectivity cannot be maintained for extended periods under high currents to meet industrial requirements. This paper reviews excellent work from the perspective of catalyst stability, summarizing and discussing the performance of typical catalysts. Strategies for preparing stable and highly active catalysts are also briefly described. This review may offer a useful data reference and valuable guidance for the future design of long‐stability catalysts.

chemistry, multidisciplinary,green & sustainable science & technology
Comparative study on formic acid electro-oxidation by shape-controlled platinum@palladium nanocrystals

Jun Hong,Yi Shen

DOI: https://doi.org/10.1016/j.jelechem.2023.117896

IF: 4.598

2023-11-01

Journal of Electroanalytical Chemistry

Abstract:Searching for high-performance electrocatalysts for the electro-oxidation of formic acid is essential for the widespread application of direct formic acid fuel cells. Herein, three types of core-shelled Pt@Pd nanoarchitectures were prepared via an epitaxial growth process using Pd cubes, dodecahedra, and icosahedra as seeds. The structures of the Pt@Pd nanocrystals were characterized by transmission electron microscopy, energy dispersive X-ray spectroscopy, and electrochemical measurements. Using formic acid as a model substrate, the electrocatalytic performance and underlying mechanism of the resulting samples were studied. The Pt@Pd showed better activity and stability in both acidic and alkaline electrolytes compared to the commercial Pt/C and Pd/C. In particular, the Pt@Pd icosahedra showed the best activity in acidic electrolytes, leading to a current density of 4.18 mA cm −2 , which is 3 times that of the Pt/C. In alkaline electrolytes, the Pt@Pd dodecahedra showed the best activity, yielding a current density of 2.5 mA cm −2 , which is 11.9 times that of the Pt/C. The mechanisms of formic oxidation were studied by potential sweeps and the facet-dependent activity was correlated with the adsorptions of the formate and intermediates. The Pt@Pd cubes exhibited the superior stability in the alkaline electrolytes, resulting in a current decay by only 19 % after 1000 cycles, which is much smaller than that of the Pt/C.

chemistry, analytical,electrochemistry
Formic acid oxidation on platinum electrodes: a detailed mechanism supported by experiments and calculations on well-defined surfaces

A. Ferre-Vilaplana,J. V. Perales-Rondón,C. Buso-Rogero,J. M. Feliu,E. Herrero

DOI: https://doi.org/10.1039/c7ta07116g

2017-01-01

J. Mater. Chem. A

Abstract:The key elements in the mechanism of the formic acid oxidation reaction on platinum have been completely elucidated, not only for the direct path through an active intermediate, but also for the CO formation route.
Recent Advances in Photo-Assisted Electrocatalysts for Energy Conversion

Haoyue Zhang,Fang Song

DOI: https://doi.org/10.1039/d1ta06216f

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:The review highlights the recent advances and challenges in photo-assisted electrocatalysis, including photo-generated carrier-assisted, LSPR-assisted, and photothermally-assisted ones.
Electrocatalysis for the oxygen evolution reaction: recent development and future perspectives

Nian-Tzu Suen,Sung-Fu Hung,Quan Quan,Nan Zhang,Yi-Jun Xu,Hao Ming Chen

DOI: https://doi.org/10.1039/c6cs00328a

IF: 46.2

2017-01-01

Chemical Society Reviews

Abstract:We review the fundamental aspects of metal oxides, metal chalcogenides and metal pnictides as effective electrocatalysts for the oxygen evolution reaction.

chemistry, multidisciplinary
Modulating the Oxophilic Properties of Inorganic Nanomaterials for Electrocatalysis of Small Carbonaceous Molecules

Fengxia Wu,Ling Zhang,Jianping Lai,Rafael Luque,Wenxin Niu,Guobao Xu

DOI: https://doi.org/10.1016/j.nantod.2019.100802

IF: 17.4

2019-01-01

Nano Today

Abstract:Modulating the oxophilic properties of inorganic nanomaterials has become a powerful approach to achieve high catalytic performance of electrocatalytic reaction in fuel cells. This review introduces the recent progress on the methods of engineering the oxophilic properties of nanomaterials and their corresponding applications in electrocatalysis. Key engineering methods are summarized, including decorating oxophilic atoms and nanoclusters on host metal based nanocatalysts, engineering the oxophilic composition of nanocatalyst surfaces, and utilizing oxophilic materials as support for nanocatalysts. The critical role of the oxophilic properties of these nanocatalysts in CO electrooxidation, alcohol electrooxidation, and formic acid electrooxidation reactions are highlighted. Perspectives on engineering the oxophilic properties of nanomaterials and their influence on electrocatalysis are presented. (C) 2019 Elsevier Ltd. All rights reserved.
Advances in Transition-Metal-Based Dual-Atom Oxygen Electrocatalysts.

Yuting He,Xingchen Zhou,Yufei Jia,Hongtao Li,Yi Wang,Yongning Liu,Qiang Tan

DOI: https://doi.org/10.1002/smll.202206477

2023-01-01

Abstract:Oxygen electrocatalysis has aroused considerable interest over the past years because of the new energy technologies boom in hydrogen energy and metal-air battery. However, due to the sluggish kinetic of the four-electron transfer process in oxygen reduction reaction and oxygen evolution reaction, the electro-catalysts are urgently needed to accelerate the oxygen electrocatalysis. Benefit from the high atom utilization efficiency, unprecedentedly high catalytic activity, and selectivity, single-atom catalysts (SACs) are considered the most promising candidate to replace the traditional Pt-group-metal catalysts. Compared with SACs, the dual-atom catalysts (DACs) are attracting more attraction including higher metal loading, more versatile active sites, and excellent catalytic activity. Therefore, it is essential to explore the new universal methods approaching to the preparation, characterization, and to elucidate the catalytic mechanisms of the DACs. In this review, several general synthetic strategies and structural characterization methods of DACs are introduced and the involved oxygen catalytic mechanisms are discussed. Moreover, the state-of-the-art electrocatalytic applications including fuel cells, metal-air batteries, and water splitting have been sorted out at present. The authors hope this review has given some insights and inspiration to the researches about DACs in electro-catalysis.
Recent Advances in Atomic‐Level Engineering of Nanostructured Catalysts for Electrochemical CO2 Reduction

Huiling Liu,Yating Zhu,Jianmin Ma,Zhicheng Zhang,Wenping Hu

DOI: https://doi.org/10.1002/adfm.201910534

IF: 19

2020-01-01

Advanced Functional Materials

Abstract:Electrochemical reduction of CO2 into value-added chemicals provides a promising approach to mitigate climate change caused by CO2 from excess consumption of fossil fuels. As the CO2 molecule is chemically inert and the reaction kinetics is sluggish, efficient electrocatalysts are thus highly required for promoting the conversion of CO2. With great efforts devoted to improving the catalytic performance, the development of electrocatalysts for CO2 reduction has gone from bulk metals with poor control to nanostructures with atomic precision. Nanostructured electrocatalysts with atomic precision are believed to be capable of combining the advantages of heterogeneous and homogenous catalysts. In this review, the recent advances in designing nanostructured electrocatalysts at the atomic level for boosting the catalytic performance toward CO2 reduction and revealing the structure-property relationship are summarized. The challenges and opportunities in the near future are also proposed for paving the development of electrocatalytic CO2 reduction.
A Review on Liquid-Phase Heterogeneous Dehydrogenation of Formic Acid: Recent Advances and Perspectives

Likai Zhang,Wei Wu,Zhao Jiang,Tao Fang

DOI: https://doi.org/10.1007/s11696-018-0469-8

IF: 2.146

2018-01-01

Chemical Papers

Abstract:With the increasing consumption of the fossil energy and the global warming, hydrogen has attracted extensive research due to the clean, renewable, and high-energy density properties. As a hydrogen carrier, formic acid is a main byproduct from many biomass processes and can be used in fuel cells directly. More importantly, formic acid is recyclable by the "formic acid-carbon dioxide cycle", which does not produce any exhaust. Based on the previous reports, this study is focused on liquid-phase heterogeneous dehydrogenation of formic acid and summarizes the corresponding catalysts including mono-metallic, bi-metallic, and tri-metallic samples. Moreover, the comparison of catalytic performance about the dehydrogenation process is demonstrated considering the parameters of solvent, TOF (turnover frequency), and temperature. Furthermore, the morphology, composition, and structure of the catalysts, as well as the synthetic methods, are discussed and compared. Finally, some suggestions are proposed to design the corresponding catalysts and enhance the catalytic performance for formic acid dehydrogenation.
Progress of fundamental mechanism of formic acid decomposition and electrooxidation

Xin Liu,Timo Jacob,Wang Gao

DOI: https://doi.org/10.1016/j.jechem.2022.02.017

IF: 13.1

2022-07-01

Journal of Energy Chemistry

Abstract:Formic acid (HCOOH) is considered as a promising viable fuel-cell ingredient for low temperature proton-exchange membrane fuel cells as a consequence of their high safety and energy density. As one prototype reaction, the study of HCOOH decomposition and electrooxidation is also helpful to understand the reaction mechanism of other small molecular organics. Herein, we present a comprehensive overview of HCOOH decomposition and electrooxidation in different environment conditions and analyze the reaction mechanism from both experimental and theoretical point of view. Furthermore, we discuss the known strategies for improving the performance of HCOOH decomposition and electrooxidation catalysts. Finally, this review presents a prospect for the future study of HCOOH decomposition and electrooxidation.

chemistry, physical,engineering, chemical, applied,energy & fuels

Recent advances in formic acid electro-oxidation: from the fundamental mechanism to electrocatalysts

Structural Designs and Mechanism Insights into Electrocatalytic Oxidation of 5-Hydroxymethylfurfural

Recent advances in designing efficient electrocatalysts for electrochemical carbon dioxide reduction to formic acid/formate

Metal-based Electrocatalytic Conversion of CO2 to Formic Acid/formate

Electrocatalytic Oxidation of Formic Acid: Closing the Gap Between Fundamental Study and Technical Applications

Electrocatalysis of formic acid on palladium and platinum surfaces: from fundamental mechanisms to fuel cell applications.

Metal-based electrocatalytic conversion of CO<sub>2</sub> to formic acid/formate

Progress in Catalysts for Formic Acid Production by Electrochemical Reduction of Carbon Dioxide

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cells – Part I – Fundamentals and Pd Based Catalysts

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cell‐II‐Platinum‐Based Catalysts

Recent Advances in Engineering Fe‐N‐C Catalysts for Oxygen Electrocatalysis in Zn‐Air Batteries

Advances in the Stability of Catalysts for Electroreduction of CO2 to Formic Acid

Comparative study on formic acid electro-oxidation by shape-controlled platinum@palladium nanocrystals

Formic acid oxidation on platinum electrodes: a detailed mechanism supported by experiments and calculations on well-defined surfaces

Recent Advances in Photo-Assisted Electrocatalysts for Energy Conversion

Electrocatalysis for the oxygen evolution reaction: recent development and future perspectives

Modulating the Oxophilic Properties of Inorganic Nanomaterials for Electrocatalysis of Small Carbonaceous Molecules

Advances in Transition-Metal-Based Dual-Atom Oxygen Electrocatalysts.

Recent Advances in Atomic‐Level Engineering of Nanostructured Catalysts for Electrochemical CO2 Reduction

A Review on Liquid-Phase Heterogeneous Dehydrogenation of Formic Acid: Recent Advances and Perspectives

Progress of fundamental mechanism of formic acid decomposition and electrooxidation