Abstract:Direct liquid fuel cells are among the most promising energy conversion devices for sustainable energy applications, especially as portable energy sources. The two most effective fuels are methanol and formic acid (FA), and even though methanol has higher energy content, it is toxic, non-renewable, and has high fuel crossover. However, FA can be produced easily from biomass and it is non-toxic and has a higher open circuit potential among other factors 1 . Usually, FA can be oxidized through two pathways, a direct pathway that is most desirable and directly produces CO 2 2 . While the indirect pathway produces CO as an intermedia that can adsorb to the catalyst surface deactivating it (poisoning effect) 3 . Palladium is known to be the most active catalyst for FA oxidation in acidic media 4 but it is also easily poisoned by CO accumulation on its surface. The increase in FA concentration to get higher energy density would make the indirect oxidation pathway more favorable lowering the efficiency of the fuel cell. To overcome this problem low molecular weight organic additives were suggested to be used in combination with FA to suppress this poisoning effect by competing with CO molecules for the adsorption sites on the catalyst surface. In this work, the effect of using ethanol and FA blend fuels on the behavior of Pd/C towards FA oxidation was investigated. The preliminary cyclic voltammetry study showed promising results about ethanol's ability to inhabit the indirect FA oxidation pathway. However, the results obtained by the chronopotentiometry and by studying the first derivatives of the cyclic voltammetry data give more insightful results on the effect of ethanol in the fuel blend. It was found that ethanol will inhabit the indirect oxidation of FA up to specific concentration but it will also affect the direct oxidation after a giving time and that the applied potential will have an effect on the adsorption orientation of Ethanol molecules on the catalyst surface. References 1) Sun, J.; Luo, X.; Cai, W.; Li, J.; Liu, Z.; Xiong, J.; Yang, Z. Ionic-Exchange Immobilization of Ultra-Low Loading Palladium on a RGO Electro-Catalyst for High Activity Formic Acid Oxidation. RSC Adv. 2018, 8 (33), 18619–18625. 2) Jiang, K.; Zhang, H.-X.; Zou, S.; Cai, W.-B. Electrocatalysis of Formic Acid on Palladium and Platinum Surfaces: From Fundamental Mechanisms to Fuel Cell Applications. Phys Chem Chem Phys 2014, 16 (38), 20360–20376. 3) Gunji, T.; Matsumoto, F. Electrocatalytic Activities towards the Electrochemical Oxidation of Formic Acid and Oxygen Reduction Reactions over Bimetallic, Trimetallic and Core–Shell-Structured Pd-Based Materials. Inorganics 2019, 7 (3), 36. 4) Gharib, A.; Arab, A. Improved Formic Acid Oxidation Using Electrodeposited Pd–Cd Electrocatalysts in Sulfuric Acid Solution. Int. J. Hydrog. Energy 2021, 46 (5), 3865–3875.

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cells – Part I – Fundamentals and Pd Based Catalysts

Review—Recent Progress in Electrocatalysts for Oxygen Reduction Suitable for Alkaline Anion Exchange Membrane Fuel Cells

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cell‐II‐Platinum‐Based Catalysts

Electrocatalysis of formic acid on palladium and platinum surfaces: from fundamental mechanisms to fuel cell applications.

Hydrogen Intercalation‐Induced Crystallization of Ternary PdNiP Alloy Nanoparticles For Direct Formic Acid Fuel Cells

Unlocking the potential of Pt-based and metal oxides catalysts in liquid fuel cells technologies: Performance and challenges

Ultra-thin layer structured anodes for highly durable low-Pt direct formic acid fuel cells

Platinum and Palladium Monolayer Electrocatalysts for Formic Acid Oxidation

Electrocatalytic Oxidation of Formic Acid: Closing the Gap Between Fundamental Study and Technical Applications

Milestones of Electrocatalyst Development for Direct Alcohol Fuel Cells

Empowering Tri‐Functional Palladium's Catalytic Activity and Durability in Electrocatalytic Formic Acid Oxidation Reaction via Innovative Self‐Caging and Alloying Strategies

Understanding the Effect of Blending Ethanol with Formic Acid on Pd Activity Towards Acidic Oxidation of Concentrated Formic Acid

Carbon-Supported Single-Atom Catalysts for Formic Acid Oxidation and Oxygen Reduction Reactions

Construction of Pd-based Nanocatalysts for Fuel Cells: Opportunities and Challenges

Atomically dispersed catalysts for small molecule electrooxidation in direct liquid fuel cells

Noble Metal Based Electrocatalysts for Alcohol Oxidation Reactions in Alkaline Media

Recent Advances in Electrocatalysts for Proton Exchange Membrane Fuel Cells and Alkaline Membrane Fuel Cells

Intermetallic PdCd core promoting CO tolerance of Pd shell for electrocatalytic formic acid oxidation

Advances in power generation from ammonia via electrocatalytic oxidation in direct ammonia fuel cells

Boosting the Electrocatalytic Formic Acid Oxidation Activity via P-PdAuAg Quaternary Alloying

Materials for electrocatalysts in proton exchange membrane fuel cell: A brief review