Abstract:The traditional kinematic calibration method for manipulators requires precise three-dimensional measuring instruments to measure the end pose, which is not only expensive due to the high cost of the measuring instruments but also not applicable to all manipulators. Another calibration method uses a camera, but the system error caused by the camera's parameters affects the calibration accuracy of the kinematics of the robot arm. Therefore, this paper proposes a method for calibrating the geometric parameters of a kinematic model of a manipulator based on monocular vision. Firstly, the classic Denavit-Hartenberg(D-H) modeling method is used to establish the kinematic parameters of the manipulator. Secondly, nonlinear optimization and parameter compensation are performed. The three-dimensional positions of the feature points of the calibration plate under each manipulator attitude corresponding to the actual kinematic model and the classic D-H kinematic model are mapped into the pixel coordinate system, and the sum of Euclidean distance errors of the pixel coordinates of the two is used as the objective function to be optimized. The experimental results show that the pixel deviation of the end pose corresponding to the optimized D-H kinematic model proposed in this paper and the end pose corresponding to the actual kinematic model in the pixel coordinate system is 0.99 pixels. Compared with the 7.9 deviation pixels between the pixel coordinates calculated by the classic D-H kinematic model and the actual pixel coordinates, the deviation is reduced by nearly 7 pixels for an 87% reduction in error. Therefore, the proposed method can effectively avoid system errors caused by camera parameters in visual calibration, can improve the absolute positioning accuracy of the end of the robotic arm, and has good economy and universality.

An Efficient Pose Measurement Method for End Effector of Mobile Manipulator Based on Binocular Stereovision

A Pose Estimation and Optimization Method for Mobile Manipulator’s End-effectors Based on Stereo Vision and ICoP Algorithm*

Pose Measurement of Non-Cooperative Target Based on Stereo Vision

Robust And Accurate Multiple-Camera Pose Estimation Toward Robotic Applications

A high-accuracy pose measurement system for robotic automated assembly in large-scale space

A method for measuring 3D pose of assembly end of long shaft part using orthogonal binocular stereovision

Relative instability compensation method for hand–eye collaborative system in large-scale components measurement

Visual Measurement Method of Mobile Manipulator Motion Pose Based on Pyramid-Hierarchy Marke

Improve the Estimation of Monocular Vision 6-DOF Pose Based on the Fusion of Camera and Laser Rangefinder

A New Pose Measuring and Kinematics Calibrating Method for Manipulators

Virtual Stereovision Pose Measurement of Noncooperative Space Targets for a Dual-Arm Space Robot

Study on the measuring system of the planar parallel micro-motion worktable's location and orientation

A Pose Measurement Method of a Non-Cooperative GEO Spacecraft Based on Stereo Vision

Pose accuracy compensation of mobile industry robot with binocular vision measurement and deep belief network

Research on 6DOF Pose Measurement Algorithm of Industrial Metal Workpiece Based on Binocular Vision

An Efficient Pose Measurement Method of a Space Non-Cooperative Target Based on Stereo Vision

Optical Probe Pose Estimation in the Vision Measurement

High-Precision Monocular Vision Guided Robotic Assembly Based on Local Pose Invariance

Measurement of Mobile Manipulator Chassis Pose Change Caused by Suspension Deformation and End-Effector Accuracy Improvement Based on Multi-Sensor Fusion

Visual Measurement of Path Accuracy for Laser Welding Robots

A Visual Kinematics Calibration Method for Manipulator Based on Nonlinear Optimization