Abstract:Kinematic calibration has been widely employed for manipulators to promote their performance characteristics. For a dual-arm manipulator, most of the research attentions are paid to improving the absolute positioning accuracy. However, collaborative accuracy plays a critical role in mutual operations between the two arms. For example, in dangerous chemical experiments, the dual-arm manipulator is often demanded to grab a target object with the two hands, or re-grasp a test tube from one hand to the other, where the inferior collaborative accuracy may lead to the failure of experiments. Hence, in this paper, collaborative accuracy of dual-arm manipulators is well defined and fully considered as the objective for calibration. Robustness of the calibration is further guaranteed by minimizing the maximum distance error. The formulated problem is not a typical convex optimization, and gradient search algorithm does not work well for this problem. With researches on optimization moving forward, recent advances in nonlinear optimization are employed to seek for the solution effectively, and it is found that the minimax problem can be approximately linearized to a sequence quadratic programming (SQP) problem. Furthermore, a primal-dual subgradient algorithm is applied for solving the SQP problem with a fast local convergence. Finally, in order to verify the superiority of the proposed method, an experiment is performed on an IRB 14000 manipulator, and corresponding outcomes indicate that the RMS collaborative positioning and the orientation accuracies are significantly improved by 90.60% and 91.42%. To the best of our knowledge, our method has reached the best collaborative accuracy compared with existing works (Wang et al., 2014; Roncone et al., 2014; Motta et al., 2001). (C) 2020 Elsevier Ltd. All rights reserved.

Measurement of Mobile Manipulator Chassis Pose Change Caused by Suspension Deformation and End-Effector Accuracy Improvement Based on Multi-Sensor Fusion

Robust Kinematic Calibration for Improving Collaboration Accuracy of Dual-Arm Manipulators with Experimental Validation

Pose Alignment of Aircraft Structures with Distance Sensors and CCD Cameras

Pose Error Compensation Based on Joint Space Division for 6-DOF Robot Manipulators

Measurement, Identification, and Compensation of Pose Errors for Six-Axis Gantry Automated Fiber Placement Machine

Static Deformation-Compensation Method Based On Inclination-Sensor Feedback For Large-Scale Manipulators With Hydraulic Actuation

A New Measurement Method of Real-time Pose Estimation for an Automatic Hydraulic Excavator

An Improved Kinematic Model for Serial Robot Calibration Based on Local POE Formula Using Position Measurement

Joint angle measurement of manipulator and error compensation based on an IMU sensor

On-Line Precision Calibration of Mobile Manipulators Based on the Multi-Level Measurement Strategy

Kinematic Accuracy Analysis and Improvement of Mobile Manipulator

A high-accuracy pose measurement system for robotic automated assembly in large-scale space

Configuration Reconstruction and All-Joint Synchronous Measurement Based on Vision for Segmented Linkage Manipulator of Rigid-Flexible Dual-arm Space Robot

Reference Frame Unification of IMU-Based Joint Angle Estimation: The Experimental Investigation and a Novel Method

Sensor-Movement-Robust Angle Estimation for 3-DoF Lower Limb Joints Without Calibration

A Pose Estimation and Optimization Method for Mobile Manipulator’s End-effectors Based on Stereo Vision and ICoP Algorithm*

A Novel Posture Positioning Method for Multi-Joint Manipulators

Posture evaluation for mobile manipulators using manipulation ability, tolerance on grasping, and pose error of end-effector

Pose Accuracy Analysis of Robot Manipulators Based on Kinematics

Efficient Model-Free Calibration of a 5-Degree of Freedom Hybrid Robot

Spring-IMU Fusion Based Proprioception for Feedback Control of Soft Manipulators