Abstract:Micro-vibration is an important issue that affects the observation accuracy and imaging quality of spacecraft. The micro-vibration of spacecraft has the characteristics of wide frequency (1–300 Hz) and low amplitude (μm level). Installing a micro-vibration isolation device on a disturbance source or precision payload is an effective method to suppress micro-vibration. In this paper, we propose a novel modeling method for a micro-vibration isolator with annular damping gap. Firstly, by cleverly utilizing the principle of effective area of bellows, the complex bellows are simplified into a single tube. Based on the axial vibration of the bellows, springs are used to equivalent the elasticity of the bellows, and the interaction between the fluid and bellows is considered in the model. Through this method, we greatly simplify the isolator and constructed a semi-analytical model. Then, we use the fluid–structure coupling analysis to evaluate the difference in describing the volume deformation between the single tube and the bellows with different wall thicknesses, and then propose a novel solution. We introduce the bellows volume deformation correction coefficient to modify the model. The effectiveness of the correction method for isolators with different wall thicknesses is discussed. Next, we conduct parametric research to analyze the influences of different wall thicknesses, viscosity, damping gap width and length, and excitation force amplitude on the isolation performance. Through our research, it is found that this annular damping gap has better adjustability for isolation performance than the damping orifice, which may help propose more combinations of design parameters suitable for different isolation performance requirements. Our proposed model is suitable for fluid viscous damper working at the frequency of 1–300 Hz, that used for spacecraft micro-vibration suppression (including magnetorheological dampers and adjustable damping orifice fluid viscous damper).

Study of liquid viscosity dampers in octo-strut platform for whole-spacecraft vibration isolation

Research on Passive Isolation Characteristics and Rocket-spacecraft Coupling of a New Whole-spacecraft Isolation Platform

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

Dynamic Design of Octostrut Platform for Launch Stage Whole-Spacecraft Vibration Isolation

Octo-Strut Vibration Isolation Platform and Its Application to Whole Spacecraft Vibration Isolation

Effect of Viscous Heating in Fluid Damper on the Vibration Isolation Performance

Simulation And Design Of Composite Vibration Isolator For Spacecrafts

Modeling and parametric research of a bellows-type fluid viscous damper with annular damping gap for spacecraft micro-vibration suppression

Experiment on Active Vibration Isolation of a Conical Shell Isolator

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

Analytical Study of Whole Flexible Spacecraft Vibration Isolation

Modeling and analysis of a viscoelastic micro-vibration isolation and mitigation platform for spacecraft

Transverse Dynamic Characteristic of Spacecraft Vibration Isolation Platform

A Six Degrees-of-Freedom Vibration Isolation Platform Supported by a Hexapod of Quasi-Zero-Stiffness Struts

Design and Simulation of Adiabatic–Damping Dual–Function Strut for LH2 Storage Tank

Analysis for the Principle of Whole-Spacecraft Vibration Isolation

Modeling and Analysis of Bio-Inspired, Reconfigurable, Piezo-Driven Vibration Isolator for Spacecraft

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

Analytical Study of Vibration Isolation Between a Pair of Flexible Structures

Study on the Micro-vibration Suppression of a MnCu Spring Isolation Platform with Low Stiffness and High Damping

A 2-collinear-DoF strut with embedded negative-resistance electromagnetic shunt dampers for spacecraft micro-vibration