Abstract:Silica fiber optic sensors are resistant to corrosive environments and high temperatures, making them attractive candidates for harsh conditions found in nuclear and aerospace industries. Moreover, fibers can be deployed remotely for continuous measuring of spatially distributed temperatures and strains. This study investigated embedding a Ni/Cu bi-metallic coated fiber in a stainless-steel 316 (SS316) matrix using laser powder bed fusion towards functionalizing metal components for site-specific health monitoring. The embedded fiber was continuously interrogated during controlled heating to 1000°C. The measured fiber strains were similar to the expected differential thermal strains between the fiber and the SS316 matrix, until divergent behavior was observed at temperatures >500°C. No debonding at the matrix–coating–fiber interfaces was observed during microscopy, but significant interactions between the coatings and matrix resulted in diffusion-driven chemistry variations and Kirkendall void formation. Applying the strain-lag theory revealed plastic behavior in the Ni coating at temperatures >500°C, limiting the strain transfer to the fiber at higher temperatures. It was estimated that the elastic modulus in the Ni coating had decreased from ~200 GPa at room temperature to below 40 GPa, starting at 600°C. The low elastic modulus above 600°C is within the margin of what the tangent modulus would be in the case of bilinear isotropic hardening. Regardless of the divergent strain transfer at higher temperatures, the fiber was exposed to the equivalent of 1.9% engineering strain at 1000°C, but measured only a 0.7% engineering strain due to the poor strain transfer. Although compensating for the plastic behavior of Ni proved challenging, the bonding of a brittle silica fiber to a metal matrix surviving to 1000°C invites potential iterations on coating material for future application. For example, the embedded fiber is sufficient for acoustic energy transfer, realizing high temperature distributed acoustic sensing.

Optical Fiber Sensor for Strain Monitoring of Metallic Device Produced by Very High-Power Ultrasonic Additive Manufacturing

Integrating Fiber Optic Strain Sensors into Metal Using Ultrasonic Additive Manufacturing

Optical Fiber Sensor and Assembly Method for Measuring the Tensile Strain of a Nickel-Based Directionally Solidified Superalloy in a High-Temperature Environment.

Research on Full Strain Measurement Performance of Non-intrinsic Optical Fiber F-P Sensor

An Optical Fiber Sensor Method for Simultaneously Monitoring Corrosion and Structural Strain Induced by Loading

Real-time self-monitoring and smart bend recognizing of fiber-reinforced polymer composites enabled by embedded magnetic fibers

A Novel Method of Embedding Distributed Optical Fiber Sensors for Structural Health Monitoring

Laser Opto-Ultrasonic Dual Detection for Simultaneous Compositional, Structural, and Stress Analyses for Wire + Arc Additive Manufacturing

Additive Manufacturing of Flexible Strain Sensors based on Smart Composites for Structural Health Monitoring with High Accuracy and Fidelity

Optical fiber Fabry-Perot interferometer based embeddable strain sensor with 30 nano-strain resolution

Improving the durability of the optical fiber sensor based on strain transfer analysis

Fibrous Conductive Metallogels with Hybrid Electron/Ion Networks for Boosted Extreme Sensitivity and High Linearity Strain Sensor

An Embeddable Strain Sensor with 30 Nano-Strain Resolution Based on Optical Interferometry

Highly sensitive strain sensor based on helical structure combined with Mach-Zehnder interferometer in multicore fiber

Scaffold Metamaterial and Its Application As Strain Sensor

In-situ study of tensile behavior of Ti/Al laminated metal composites fabricated via ultrasonic additive manufacturing

Various static loading condition monitoring of carbon fiber composite cylinder with integrated optical fiber sensors

A High-Performance Strain Sensor for the Detection of Human Motion and Subtle Strain Based on Liquid Metal Microwire

Distributed Strain Sensing Using Bi-Metallic Coated Fiber Optic Sensors Embedded in Stainless Steel

Distributed and multimodal strain sensing performance of flexible hydrogel functional optical fibers

A New Optical Fiber Sensor with Improved Strain Sensitivity Based on Distributed Optical Fiber Sensing Technique