Abstract:Lattice structures are bio-inspired designs made up of repeated unit cells consisting of beams, surfaces, or plates that fit together in an ordered or stochastic fashion. These unit cells are configured according to their size and shape in three dimensions. Simple lattices can be created using standard manufacturing techniques such as computer numerical control machining, welding, and casting. Additive manufacturing enables customers to make complex structures with small features at a reasonable cost. In the present work, using octagon, hexagrid, and rhombic dodecahedron lattice topologies, characterized by unit cell size from 3 × 3 × 3 to 7 × 7 × 7 mm and strut thickness from 0.5 to 1.5 mm, the structural behavior of a solid cylindrical model made of polylactic acid material under compression is analyzed. Finite element analysis (FEA) through Autodesk® Netfabb® solvers was used to assess lattice structure mechanical and structural properties. The results were validated by physical compression testing on additively manufactured samples. Cellular designs with 3 × 3 × 3 mm unit cells and 1.5 mm strut thickness displayed the lowest Von Mises stress and deformation. For different topologies, lowest results were rhombic dodecahedron (stress through FEA as 61.3108 MPa and stress through physical test as 61.05 MPa, deformation through FEA as 0.49921 mm and deformation through physical test as 0.48 mm), octagon (stress through FEA as 77.4147 MPa and stress through physical test as 76.92 MPa, deformation through FEA as 0.53316 mm and deformation through physical test as 0.51 mm), and for hexagrid (stress through FEA as 62.2911 MPa, stress through physical test as 62.15 MPa, deformation through FEA as 0.81997 mm and deformation through physical test as 0.81 mm). The percentage error between the stress through FEA and stress through physical test for octagon, hexagrid, and rhombic dodecahedron lattice topology was found out to be 0.63, 0.22, and 0.43%, respectively. Corresponding percentage deformation error between deformation through FEA and deformation through physical test was also found out to be 4.343, 2.435, and 3.848%, respectively. In addition, the impacts of volume reduction, surface area of the lattice, and relative density were explored pertaining to the structural behavior of the lattice. As a result of the examination into mechanical qualities based on these criteria, rhombic dodecahedron lattice topology with 3 × 3 × 3 mm unit cell size and strut thickness of 1.5 mm was found to be a better choice than octagon and hexagrid lattice topologies for 3D printing components that were loaded under axially compressive loads.

Improving Mechanical Performance of Fused Deposition Modeling Lattice Structures by a Snap-Fitting Method

Improved Mechanical Performance in FDM Cellular Frame Structures through Partial Incorporation of Faces

Correlation between Infill Percentages, Layer Width, and Mechanical Properties in Fused Deposition Modelling of Poly-Lactic Acid 3D Printing

Experimental and numerical investigation of PLA based different lattice topologies and unit cell configurations for additive manufacturing

Strength improvement and failure analysis of dissimilar FDM printed single-lap joints with tailored interface geometry

The in vitro effects of D‐penicillamine upon anti‐achr production by thymic and peripheral blood lymphocytes from patients with myasthenia gravis

Effect of printing characteristics for the incorporation of hexagonal-shaped lattice structure on the PLA polymeric material

The Impact of Various Filling Patterns and Building Orientations on the Mechanical Characteristics and Building Time of PLA Using FDM

Interlayer bonding improvement of PEEK and CF-PEEK composites with laser-assisted fused deposition modeling

Mechanical properties of modular assembled composite lattice architecture

Laser powder bed fusion of node-reinforced hybrid lattice structure inspired by crystal microstructure: Structural feature sensitivity and mechanical performance

Generative design and mechanical properties of the lattice structures for tensile and compressive loading conditions fabricated by selective laser melting

Mechanical Properties of Lattice Structures with a Central Cube: Experiments and Simulations

The fabrication of long carbon fiber reinforced polylactic acid composites via fused deposition modelling: Experimental analysis and machine learning

Blending and functionalisation modification of 3D printed polylactic acid for fused deposition modeling

Improved mechanical properties and energy absorption of Ti6Al4V laser powder bed fusion lattice structures using curving lattice struts

Mechanical characterization of additively-manufactured metallic lattice structures with hollow struts under static and dynamic loadings

Mechanics-guided manufacturing optimization framework to enhance the strength of architected lattice made from recycled plastic wastes

Architecture of covalent bonds between filament layers to enhance performance of 3D printing biodegradable polymer blends

Effects of Printing Temperature and Filling Percentage on the Mechanical Behavior of Fused Deposition Molding Technology Components for 3D Printing

Improving the Impact Strength and Heat Resistance of 3D Printed Models: Structure, Property, and Processing Correlationships during Fused Deposition Modeling (FDM) of Poly(Lactic Acid)