Abstract:Due to their high thermal efficiency, good reliability and durability, low fuel consumption, and low carbon dioxide emission, diesel engines are widely used in both stationary and mobile applications. However, the inherent combustion mode of diesel engines results in high particulate matter (PM) emissions. In order to meet the increasingly stringent PM emission standard, the diesel particulate filter (DPF) has become a necessary configuration to remove PM for diesel engines. Increasing damage of fuel consumption with DPF soot loading leads to the requirement of regeneration process. DPF active regeneration is a process from hydrocarbon (HC) oxidation in diesel oxidation catalyst (DOC) to deposited particle oxidation in DPF, involving the whole aftertreatment system. First, previous studies mainly focused on single converter, and have rarely explored the regeneration process considering the whole aftertreatment system. Second, few studies have conducted in-depth introductions to the microscopic oxidation characteristics of deposited particles during regeneration. Third, the high temperature resulted from the active regeneration has an important impact on the performance of selective catalytic reduction (SCR), which may be a problem to be considered in the next emission regulations, but few studies have reported this aspect. This study focuses on full course evolution process under DPF active regeneration considering the whole aftertreatment system. Taking the HC concentration as the research variables, the HC slip phenomenon, the microscopic oxidation characteristics of deposited particles, the temperature field characteristics, and the influence of active regeneration on SCR performance are systematically investigated. This study can provide valuable guidance for further understanding of DPF active regeneration characteristics, regeneration control strategy formulation and DPF durability improvement.

Low temperature, medium temperature and high temperature performance of the continuous regenerative diesel particulate filter assisted by electric regeneration

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines.

Study on Characteristics and Control Strategy of Diesel Particulate Filters Based on Engine Bench

Research on Influence of Exhaust Characteristics and Control Strategy to DOC-Assisted Active Regeneration of DPF

Investigations on the Temperature Distribution of the Diesel Particulate Filter in the Thermal Regeneration Process and Its Field Synergy Analysis

DOC Assisted DPF Regeneration under Idle Condition

Experimental Study on a Diesel Particulate Filter with Reciprocating Flow.

Numerical Investigation on the Progressive Evolution of Regeneration Pattern with Feed Temperature in a Wall-Flow-Catalyzed Diesel Particulate Filter

Multi-channel Simulation of the Regeneration of Diesel Particulate Filters

Study on Secondary Pollution of DPF Regeneration Assisted with DOC

Effects of Porosity Setting and Multilayers of Diesel Particulate Filter on the Improvement of Regeneration Performance

Full course evolution characteristics of DPF active regeneration under different inlet HC concentrations

Temperature, Particulate Emission Characteristics, and Emission Reduction Performance for SCR Coated on DPF under Drop to Idle Regeneration

An Experimental Study about the Characteristics of Reciprocating Flow Regeneration of Diesel Particulate Filter with Diesel Vapor Injection

Simulation on Transient Regeneration of Diesel Particulate Filter

Methodology of diesel particulate filter testing on test bed for non-road engine application

Impact Factors Analysis of Diesel Particulate Filter Regeneration Performance Based on Model and Test

Influence of the Engine Drop-to-idle Process on Regeneration Temperature, Filtration and Morphology Characteristics of Diesel Particulate Filters

Simulation Study on Regeneration Balance of Diesel Particulate Filter

Experimental Study on the Temperature Characteristics of a Diesel Particulate Filter During a Drop to Idle Active Regeneration Process

Research on Regeneration Characteristics of Diesel Particulate Filter Based on Fluid-Thermal-solid Coupling