Abstract:The current research of the global chassis control problem for the full drive-by-wire vehicle focuses on the control allocation (CA) of the four-wheel-distributed traction/braking/steering systems. However, the path following performance and the handling stability of the vehicle can be enhanced a step further by automatically adjusting the vehicle speed to the optimal value. The optimal solution for the combined longitudinal and lateral motion control (MC) problem is given. First, a new variable step-size spatial transformation method is proposed and utilized in the prediction model to derive the dynamics of the vehicle with respect to the road, such that the tracking errors can be explicitly obtained over the prediction horizon at varying speeds. Second, a nonlinear model predictive control (NMPC) algorithm is introduced to handle the nonlinear coupling between any two directions of the vehicular planar motion and computes the sequence of the optimal motion states for following the desired path. Third, a hierarchical control structure is proposed to separate the motion controller into a NMPC based path planner and a terminal sliding mode control (TSMC) based path follower. As revealed through off-line simulations, the hierarchical methodology brings nearly 1700% improvement in computational efficiency without loss of control performance. Finally, the control algorithm is verified through a hardware in-the-loop simulation system. Double-lane-change (DLC) test results show that by using the optimal predictive controller, the root-mean-square (RMS) values of the lateral deviations and the orientation errors can be reduced by 41% and 30%, respectively, comparing to those by the optimal preview acceleration (OPA) driver model with the non-preview speed-tracking method. Additionally, the average vehicle speed is increased by 0.26 km/h with the peak sideslip angle suppressed to 1.9°. This research proposes a novel motion controller, which provides the full drive-by-wire vehicle with better lane-keeping and collision-avoidance capabilities during autonomous driving.

Improved Adaptive Path Following Control System for Autonomous Vehicle in Different Velocities

Path Following of Autonomous Surface Vehicles with Line-of-sight and Nonlinear Model Predictive Control

Adaptivity-Enhanced Path Tracking System for Autonomous Vehicles at High Speeds

Optimal Predictive Control for Path Following of a Full Drive-by-Wire Vehicle at Varying Speeds

Research on Path Planning and Path Tracking Control of Autonomous Vehicles Based on Improved APF and SMC

An Improved Kinematic Model Predictive Control for High-Speed Path Tracking of Autonomous Vehicles

Path Following Control of Automated Vehicle Considering Uncertainties and Disturbances with Parametric Varying

Path Tracking Control for Autonomous Vehicles Based on an Improved MPC

MPC-based Path Tracking with PID Speed Control for High-Speed Autonomous Vehicles Considering Time-Optimal Travel

Adaptive Model Predictive Control-Based Path Following Control for Four-Wheel Independent Drive Automated Vehicles

Speed-Varying Path Tracking Based on Model Predictive Control for Autonomous Vehicles

Improved Model Predictive Control Path Tracking Strategy Based an Online Updating Algorithm with Cosine Similarity and a Horizon Factor

Adaptive Velocity Region-Based Path Planning System for Autonomous Vehicle under Multiple Obstacles with Various Velocities

MPC-Based Path Tracking Control for Autonomous Vehicles on Varying Friction Roads

Design, Validation and Comparison of Path Following Controllers for Autonomous Vehicles.

Path tracking control of automated vehicles based on adaptive MPC in variable scenarios

Adaptive MPC path-tracking controller based on reinforcement learning and preview-based PID controller

A Model Predictive Controller with Switched Tracking Error for Autonomous Vehicle Path Tracking

Model-Predictive-Control-Based Path Tracking Controller of Autonomous Vehicle Considering Parametric Uncertainties and Velocity-Varying

Research on Intelligent Vehicle Trajectory Tracking Control Based on Improved Adaptive MPC

MPC-based Path Tracking Control with Forward Compensation for Autonomous Driving