Abstract:Recently, the use of accelerated carbonation curing has attracted wide attention as a promising method to reduce carbon dioxide (CO2) emission and improve the mechanical properties of cement-based materials. However, the diffusion mechanism of CO2 in the matrix and the content of hydration products are the key factors that restrict the carbonation reaction rate. To understand the combined behavior of hydration and carbonation reactions, this paper investigates the influence of cement hydration induced by water-to-cement ratio (w/c) (ranging from 0.25 to 0.45) on microstructure and microhardness properties of cement paste. The experimental results demonstrated that carbonation only occurred at the surface layer of cement paste samples and carbonation efficiency was significantly influenced by greater hydration due to higher w/c. The carbonation depth of the sample with 0.45 w/c was about 6 times higher than that of sample with 0.25 w/c after 28 days of CO2 curing. XRD results revealed that calcite-type calcium carbonate is the main carbonation product and consumption of clinker phases (C2S and C3S) during the hydration enhanced the calcite precipitation in the pores of the surface layer. According to FTIR, with increasing w/c, the position of Si-O-Si stretching bond of the carbonated surface changed from Q2 to Q3, confirming the formation of amorphous silica-rich gel, along with the appearance of CO32- bonds related to calcite. In overall, the micro-mechanical analysis in this study showed that the carbonation significantly improved the surface microhardness of cement paste samples, while the refinement of capillary pores due to carbonation also decreased the negative impact of large pores formed in the matrix of cement paste prepared with high w/c.<h3 class="u-h4 u-margin-m-top u-margin-xs-bottom">Main finding</h3>Relatively high water-to-cement ratios increased the CO2 sequestration of cement paste and comparatively enhanced the porosity and microhardness at surface layer.

How Carbonation Curing Influences Ca Leaching of Portland Cement Paste: Mechanism and Mathematical Modeling

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Enhanced Carbonation Curing of Cement Pastes with Dolomite Additive

Carbonation Curing of Industrial Solid Waste‐based Aerated Concretes

Unveil the Role of Nano-Caco3 in Early Shrinkage and Tensile Properties of Cement Paste: from Experimental Work to Modeling

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

An Overview on the Influence of Various Parameters on the Fabrication and Engineering Properties of CO2-cured Cement-Based Composites

Internal carbonation curing base on molecular sieve: Influence and mechanism on cement-based materials

Accelerated Mineral Carbonation Curing of Cement Paste for CO2 Sequestration and Enhanced Properties of Blended Calcium Silicate

Effects of CO2 Concentration and the Uptake on Carbonation of Cement-Based Materials

Carbonation Process Simulation for Cement-Based Materials Based on Microstructure by a Cement Hydration Model

Macroscopic and Microscopic Properties of Cement Paste with Carbon Dioxide Curing

A model of phase stability, microstructure and properties during leaching of portland cement binders

Mechanisms of carbonation hydration hardening in Portland cements

Instant CO2 curing for dry-mix pressed cement pastes: Consideration of CO2 concentrations coupled with further water curing

Effect of water-to-cement ratio induced hydration on the accelerated carbonation of cement pastes

Mechanical and Microstructural Characteristics of Calcium Sulfoaluminate Cement Exposed to Early-Age Carbonation Curing

Effect of Extended Carbonation Curing on the Properties of γ-C 2 S Compacts and Its Implications on the Multi-Step Reaction Mechanism

Effect of Carbonation Treatment on the Strength and CO2 Uptake Rate of Composite Cementitious Material with a High Steel Slag Powder Content

Effect of Chelator on Carbon Sequestration and Mechanical Properties of CO2-cured Cement Pastes with Different Pore Structures

Dimensional stability of cement paste and concrete subject to early-age carbonation curing