Abstract:Pyrolysis catalysis is a promising method for converting waste plastics into high-value products from both economic and environmental perspectives. A low-cost catalyst is crucial for the batch treatment of waste plastics. In this study, a novel nickel catalyst based on coal gangue was prepared by impregnation. The catalyst is not only inexpensive, but also exhibits excellent catalytic performance in the pyrolysis of plastics. Polyethylene was pyrolyzed in a two-stage fixed-bed reactor to produce carbon nanotubes and hydrogen. The effects of catalytic temperatures on the production of hydrogen and carbon nanotubes from the catalyst were investigated. The maximum concentration and yield of hydrogen were 66.48 vol.% and 31.48 mmol/gplastic at 750 °C. Various techniques were used to fully characterize the carbon deposition, such as electron microscopy, temperature programmed oxidation, X-ray diffraction and Raman spectroscopy. The results showed when the catalytic temperature is 800 °C, the graphitization degree of obtained carbon was higher and the defects was fewer. The Raman IG/ID of the product was 0.72, which exceeded the graphitization of many industrially synthesized carbon nanotubes. It is also found that the catalytic temperature was very important for the hydrogen yield and the growth of carbon nanotubes. The temperature is too low, the catalyst activity is insufficient. If the temperature was too high, the metal particles in the catalyst would agglomerate, resulting in the reduction of the catalyst active site and catalyst deactivation. Therefore, it is necessary to select a suitable temperature to achieve the co-production of hydrogen and carbon nanotubes from waste plastics. This study provides a new and effective way for the catalytic pyrolysis of waste plastics and the comprehensive utilization of coal gangue.

A Simple Route for the Direct Conversion of Waste Plastic to Hafnium Carbide Nanoparticles at Low Temperature

Mechanistic Understanding of Efficient Polyethylene Hydrocracking over Two-Dimensional Platinum-Anchored Tungsten Trioxide.

One Step Conversion Of Waste Polyethylene To Cr3c2 Nanorods And Cr2alc Particles Under Mild Conditions

A high-quality hydrogen production strategy from waste plastics through microwave-assisted reactions with heterogeneous bimetallic iron/nickel/cerium catalysts

Converting Waste Polyethylene into ZnCCo3 and ZnCNi3 by a One-Step Thermal Reduction Process.

Constructing bifunctional porous nanosheets for efficient conversion of waste plastics into valuable hydrogen and carbons

Microwave-carbon Fiber Cloth Co-Ignited Catalytic Degradation of Waste Plastic into High-Yield Hydrogen and Carbon Nanotubes

Product Selection Toward High-Value Hydrogen and Bamboo-Shaped Carbon Nanotubes from Plastic Waste by Catalytic Microwave Processing

In-situ exsolution of Fe-Ni alloy catalysts for H2 and carbon nanotube production from microwave plasma-initiated decomposition of plastic wastes

A Thermal Reduction Route to Nanocrystalline Transition Metal Carbides from Waste Polytetrafluoroethylene and Metal Oxides

Low-Temperature Upcycling of Polypropylene Waste into H2 Fuel Via a Novel Tandem Hydrothermal Process

Temperature-Dependent Nifeal Catalysts for Efficient Microwave-Assisted Catalytic Pyrolysis of Polyethylene into Value-Added Hydrogen and Carbon Nanotubes

Grave-to-cradle Upcycling of Ni from Electroplating Wastewater to Photothermal CO2 Catalysis

Laser-based fabrication of superhydrophobic carbide surfaces from waste plastics

Conversion of Waste Plastic Packings to Carbon Nanomaterials: Investigation into Catalyst Material, Waste Type, and Product Applications

Low-temperature upcycling of PET waste into high-purity H2 fuel in a one-pot hydrothermal system with in situ CO2 capture

Upcycling Polyethylene to High‐Purity Hydrogen under Ambient Conditions via Mechanocatalysis

Upcycling of plastic waste to atomic nickel site-decorated carbon for efficient electrochemical CO2 conversion

Microwave-intensified catalytic upcycling of plastic waste into hydrogen and carbon nanotubes over self-dispersing bimetallic catalysts

Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst

A Novel Nickel Catalyst Supported on Coal Gangue for Producing Hydrogen and Carbon Nanotubes from Waste Plastics