Abstract:In order to use abrasive tools more effectively, it is important to understand their working capability. As a complex, fully-compliant abrasive polishing tool, the tool influence function (TIF) of the abrasive cloth flap wheel (ACFW) has not been studied and modeled. Experimental testing and data analysis was conducted to analyze the variations in the shape of the TIF, maximum material removal depth, material removal volume, and the average offset of the TIF with key process parameters for dry and wet polishing. A TIF experimental model for ACFW polishing was developed using cubic polynomial surface fitting and coefficient regression. Further, based on the principle of curvilinear integration, the cross-sectional profile of single-line polishing with various relative feed angles is accurately simulated, and the influence of the micro-topography in the TIF on the simulation results is discussed. Moreover, a method is proposed for the optimal selection of polishing path spacing and feed rate. Based on the established TIF model and single-line polished section profile calculation, cumulative removal profile simulations and parameter calculation with different polishing line spacing are carried out to select the combination of parameters with the maximum polishing efficiency within the constraints of material removal depth and its uniformity. The results of the validation experiments show that around the optimal parameter combination, the simulated profile follows the same trend as the peak-to-valley (PV) value of the measured profile, and the relative error between the cumulative material removal depth and the target value does not exceed 5%. These research findings establish a foundation and guidance for the more efficient utilization of the ACFW abrasive tool.

An Adaptive Flexible Polishing Path Programming Method of the Blisk Blade Using Elastic Grinding Tools

Adaptive Polishing for Blisk by Flexible Grinding Head

Parameter Optimization of Five-Axis Polishing Using Abrasive Belt Flap Wheel for Blisk Blade

Flexible polishing machine with dual grinding heads for aeroengine blade and blisk

Reducing Roughness of Freeform Surface Through Tool Orientation Optimization in Multi-Axis Polishing of Blisk

Research on Flexible Adaptive CNC Polishing Process and Residual Stress of Blisk Blade

Geometric Characteristic Modeling for Flexible Contact of Sanding Wheel–polished Complex Surface

Forward Polishing Process Planning of Aero-Engine Blisk Blade

Evaluation and Improvement of Material Removal Rate with Good Surface Quality in TC4 Blisk Blade Polishing Process

A profile-adaptive compliant polishing tool for aero-engine blade finishing process

Five-axis Abrasive Belt Flap Wheel Polishing Method for Leading and Trailing Edges of Aero-Engine Blade

Design and Application of the Blisk Five-axis NC Polishing Machine

Prediction of Surface Roughness Ratio of Polishing Blade of Abrasive Cloth Wheel and Optimization of Processing Parameters

ENHANCED MATERIAL REMOVAL RATE AND SURFACE QUALITY IN Ti-6Al-4V BLISK BLADE POLISHING BY GRA-RBF-FA METHOD

Analysis and Optimization of Process Parameter Intervals for Surface Quality in Polishing Ti-6Al-4V Blisk Blade

Study on Avoiding the Knife Marks of the Blade after Polishing by Flap Disc

On the path planning method of polishing tool based on the abrasive belt flap wheel

Automatic polishing technology of blisk robot

Posture Adaptive Control of the Flexible Grinding Head for Blisk Manufacturing

Freestyle belt polishing technology for leading and trailing edges of aero-engine blade

Modeling of Tool Influence Function for the Abrasive Cloth Flap Wheel and Optimization of Polishing Path Spacing and Feed Rate