Abstract:In this paper, an integrated computational materials science approach for selective laser melting (SLM) at the mesoscale is presented. A particle dropping model was developed to simulate the representative powder-bed particle distribution of a measured titanium alloy powder. Thermal fluid flow and resulting microstructural evolution of a set of laser scanned single tracks with different powder layer thicknesses and scanning speeds during SLM were also studied using both computational and experimental approaches. The simulated powder particle distribution was found to be consistent with experimental measurement. The thermal fluid flow model predicts that single laser scanned tracks become increasingly irregular-shaped with increased powder layer thickness and increased laser scanning speed. These findings were reinforced by scanning electron microscopy analysis. The more dispersed dissipation of the localised heat for thicker powder layers is understood to cause increased melting and evaporation. This can lead to increased Marangoni force and recoil pressure which in turn destabilises the melt flow. The use of an argon atmosphere speeds up the solidification process when compared with air but does not affect the morphology of single tracks significantly. The predicted microstructure was consistent with the electron backscattered diffraction data. The microstructure-based modelling methodology considering the representative powder size distribution provides a good predictive capability for the laser-powder interaction behaviour, surface structure and porosity development.

Data Mining for Mesoscopic Simulation of Electron Beam Selective Melting

Modeling and Experimental Validation of the Electron Beam Selective Melting Process

Parametric Study and Surface Morphology Analysis of Electron Beam Selective Melting

Meso-scale Modeling of Multiple-Layer Fabrication Process in Selective Electron Beam Melting: Inter-layer/track Voids Formation

Multi-scale Modeling of Electron Beam Melting of Functionally Graded Materials

Research Progress of Multi-Scale Multi-Physics Modeling for Selective Melting Process

Numerical Study of Temperature Field and Melt Pool Properties during Electron Beam Selective Melting Process with Single Line and Multiple Line Scanning

A Two-Relaxation-Time Lattice Boltzmann Model for Electron Beam Selective Melting Additive Manufacturing

Finite Element Framework for Electron Beam Melting Process Simulation

Numerical Modeling of Electron Beam Cold Hearth Melting for the Cold Hearth

Investigation on Surface Roughness in Electron Beam Selective Melting by Mesoscale Model

PARTICLE SCALE NUMERICAL MODELLING OF HEAT TRANSFER AND MELT POOL DYNAMICS IN SELECTIVE LASER MELTING

Molten pool flow behavior and influencing factors in electron beam selective melting of IN738 superalloy

Numerical Simulation for Electron Beam Selective Melting PBF Additive Manufacturing of Molybdenum

Modeling and numerical study of the molten pool dynamics during scanning electron beam welding of aluminum alloys: Physical mechanism, prediction and parameter selection

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Multi-Physics Modeling of Single/Multiple-Track Defect Mechanisms in Electron Beam Selective Melting

Phase-field simulation of microstructure evolution in electron beam additive manufacturing

The Effect of Electron Beam Energy Density on Temperature Field for Electron Beam Melting

Modeling precipitation process of Al-Cu alloy in electron beam selective melting with a 3D cellular automaton model

Mesoscale Modelling of Selective Laser Melting: Thermal Fluid Dynamics and Microstructural Evolution