Abstract:A shape-stabilized composite phase change material (ss-CPCM) comprising polyethylene glycol (PEG) and porous carbon was prepared by absorbing PEG into porous carbon, assisted by ultrasound. In the composite, PEG served as a phase change material for thermal energy storage, and the porous carbon, which was prepared from fresh potato via freeze drying followed by heat treatment, was used as an absorbent that also acted as the supporting material. Various analytical techniques were used to investigate the chemical composition, microstructure, and thermal properties of the prepared PEG/porous carbon ss-CPCMs. Scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopic results indicated that PEG was well absorbed and encapsulated in the porous structure of the carbon and that there was no chemical reaction between them during the phase change process. The shape and exudation stability test results indicated that the PEG/porous carbon ss-CPCMs have excellent shape stability, compared to pristine PEG. The contact angle test suggested that the melting PEG has good level of wettability on the carbon so that melting PEG could be well protected from exudation in the porous carbon by surface tension effects, even if the temperature is higher than the melting point of PEG. Differential scanning calorimetric results showed that the PEG/porous carbon ss-CPCMs have considerable phase change enthalpies and thermal storage capabilities. In addition to this, the latent heats of ss-CPCMs increased with increasing contents of PEG in the composites, and the highest value was achieved when the amount of PEG was 50%. Moreover, the thermogravimetric analysis results showed that the composites had excellent thermal stabilities. Based on the above analyses, the prepared ss-CPCM with 50% PEG content proved to be a promising candidate for thermal energy storage applications.

Solvent-free Preparation of Bio-Based Polyethylene Glycol/wood Flour Composites As Novel Shape-Stabilized Phase Change Materials for Solar Thermal Energy Storage

Novel Poly (lactic Acid) Shaped Wood-Plastic Phase Change Composites for Thermal Energy Storage

Bio-based Poly (lactic Acid) Shaped Wood-Plastic Phase Change Composites for Thermal Energy Storage Featuring Favorable Reprocessability and Mechanical Properties

Study on a PEG/epoxy Shape-Stabilized Phase Change Material: Preparation, Thermal Properties and Thermal Storage Performance

A Novel Bio-Based Polyurethane/wood Powder Composite As Shape-Stable Phase Change Material with High Relative Enthalpy Efficiency for Solar Thermal Energy Storage

Preparation and thermal properties of shape-stabilized composite phase change materials based on polyethylene glycol and porous carbon prepared from potato

Novel Bio-Based Pomelo Peel Flour/Polyethylene Glycol Composite Phase Change Material for Thermal Energy Storage

Thermally Conductive and Shape‐Stabilized Polyethylene Glycol/Carbon Foam Phase‐Change Composites for Thermal Energy Storage

Double-skeleton based shape-stabilized phase change materials with excellent solar-thermal energy conversion and shape memory performance

Preparation and thermal properties of shape‐stabilized polyethylene glycol/mesoporous silica composite phase change materials for thermal energy storage

Biomass-based Shape-Stabilized Phase Change Materials from Artificially Cultured Ship-Shaped Diatom Frustules with High Enthalpy for Thermal Energy Storage

Preparation and Performance of Novel Form-Stable Composite Phase Change Materials Based on Polyethylene Glycol/White Carbon Black Assisted by Super-Ultrasound-Assisted

Shape-stable phase change composites based on carbonized waste pomelo peel for low-grade thermal energy storage

Solvent-free Synthesis and Properties of Novel Solid–solid Phase Change Materials with Biodegradable Castor Oil for Thermal Energy Storage

One-Step and Solvent-Free Synthesis of Polyethylene Glycol-Based Polyurethane As Solid–Solid Phase Change Materials for Solar Thermal Energy Storage

Sol-Gel Condensation of Temperature Sensitive and Shape Stabilized Phase Change Materials for Thermal Energy Storage

Modified Mesoporous Silica Filled with PEG As a Shape-Stabilized Phase Change Materials for Improved Thermal Energy Storage Performance

Polyethylene Glycol/Expanded Vermiculite Shape-Stabilized Composite Phase Change Materials for Thermal Energy Storage

Preparation and Properties of Polyethylene Glycol Based Semi-Interpenetrating Polymer Network As Novel Form-Stable Phase Change Materials for Thermal Energy Storage

Shape-stable composite phase change materials encapsulated by bio-based balsa wood for thermal energy storage

Preparation and Performance of Novel Polyvinylpyrrolidone/polyethylene Glycol Phase Change Materials Composite Fibers by Centrifugal Spinning