Abstract:<p>During laser powder bed fusion additive manufacturing, laser power absorption is governed by a protean pool of molten metal that can present as a highly reflective surface, a deeply absorbing cavity, or some amalgamation thereof. These melt pool dynamics have been linked to defect creation, porosity, and surface finish quality. Although these are therefore critical for determining final part quality, their instantaneous influence on laser absorption have only been explored through simulation. To date, direct real-time observations have been elusive due to the locally extreme environment. In this work, we focus a laser on Ti-6Al-4V powder and bare plate while quantifying the time-dependent, absolute energy absorption by monitoring omnidirectional backscattered laser intensity. We also simultaneously record the projective melt pool geometries with high-speed synchrotron x-ray imaging. We find that laser absorption strongly reflects the stability of the vapor depression over a wide range of applied laser powers, oxygen content in the processing atmosphere, and with the presence of powder. During laser scanning of a powder bed surface, we find a significant absorption reduction after 400 µs due to a dramatic change in the vapor depression aspect ratio – an event known to create porosity. As several industrial scan strategies necessitate thousands of these events during a build, their identification and control is of significant practical importance. Lastly, a normalized enthalpy model is demonstrated to be effective in quantifying the relationship between the laser absorption and cavity depth, even under transient conditions. In addition to providing vital quantitative data for simulation calibration, the correlation of melt pool geometry with laser absorption during realistic processing conditions suggests the use of a total backscattered light detection system for real-time process control.</p>

Diagnosis of the Surface Morphology of Laser-Ablated Materials Using the Weighted-Dct Approach in Laser Speckle Interferometry for Application to Plasma Facing Materials

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

In-Situ 3d Shape Measurement System for High-Temperature Object in Plasma Wind Tunnel Via Dmd-Projecting Laser Structured Light and Adaptive Speckle Filtering

Evaluation of a laser speckle interferometry-based diagnostic system for wall surface variation in tokamak device

Monte Carlo/molecular Dynamics Simulation on Melting and Evaporating Processes of Material Due to Laser Irradiation

Study of Form Control Algorithm in Atmospheric Pressure Plasma Processing

Characterization of multilayer coatings of aluminium, tungsten and molybdenum on steel substrate using laser-induced breakdown spectroscopy

Laser speckle interferometry approach for measuring the first wall surface micro-morphology in fusion devices with only single interferogram based on Hilbert transform

A potential optical approach for diagnosis of the local magnetic field near the surface of the first wall/divertor tiles by Zeeman effect using polarization-resolved laser-induced breakdown spectroscopy

Quantitative Evaluation of Subsurface Damage by Improved Total Internal Reflection Microscopy

Studies of erosion-deposition of plasma-facing materials due to plasma-wall interactions in EAST tokamak

On the relationship between the dynamics of the power density and workpiece surface texture in pulsed laser ablation

Evaluation of a Novel Femtosecond Laser Ablation System for In Situ Analysis Based on Two-Dimensional Galvanometer Scanners

Fabrication of Interference Textures on Cemented Carbides Using Nanosecond and Femtosecond Laser Pulses

Combining laser-induced fluorescence and light-scattering microscopies to diagnose low-fluence damage precursors on KDP-based crystal surface

Defect recognition in Ti-6Al-4V fabrication by in situ monitoring of directed energy deposition using a laser beam

Modified calculation method using FFT filtering and reconstructing of an interferogram for monitoring a laser-plasma density

Optical Interferometry Diagnostics in Laser-Induced Spallation on Film–substrate Systems

[Meningoradiculitis with neurologic deficit with a favorable spontaneous course in acquired immunodeficiency syndrome].

Femtosecond laser drilling of film cooling holes: Quantitative analysis and real-time monitoring

The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing