Abstract:Lead zirconate titanate (PbZrxTi1-xO3, or PZT) is a piezoelectric material widely used as sensors and actuators. For microactuators, PZT often appears in the form of thin films to maintain proper aspect ratios. One major challenge encountered is accurate measurement of piezoelectric coefficients of PZT thin films. In this paper, we present a simple, low-cost, and effective method to measure piezoelectric coefficient d33 of PZT thin films through use of basic principles in mechanics of vibration. A small impact hammer with a tiny tip acts perpendicularly to the PZT thin-film surface to generate an impulsive force. In the meantime, a load cell at the hammer tip measures the impulsive force and a charge amplifier measures the responding charge of the PZT thin film. Then the piezoelectric coefficient d33 is obtained from the measured force and charge based on piezoelectricity and a finite element modeling. We also conduct a thorough parametric study to understand the sensitivity of this method on various parameters, such as substrate material, boundary conditions, specimen size, specimen thickness, thickness ratio, and PZT thin-film material. Two rounds of experiments are conducted to demonstrate the feasibility and accuracy of this new method. The first experiment is to measure d33 of a PZT disk resonator whose d33 is known. Experimental results show that d33 measured via this method is as accurate as that from the manufacturer's specifications within its tolerance. The second experiment is to measure d33 of PZT thin films deposited on silicon substrates. With the measured d33, we predict the displacement of PZT thin-film membrane microactuators. In the meantime, the actuator displacement is measured via a laser Doppler vibrometer. The predicted and measured displacements agree very well validating the accuracy of this new method.

Design and Fabrication of a D33-mode Piezoelectric Micro-Accelerometer

Study of a piezoelectric accelerometer based on d33 mode

Ultra-high-sensitivity micro-accelerometer achieved by pure axial deformation of piezoresistive beams

Analysis and Design of A Self-Powered Piezoelectric Microaccelerometer

A micromachined piezoelectric PZT-based cantilever in d33 mode

Monolithically Integrated Triaxial High-Performance Micro Accelerometers with Position-Independent Pure Axial Stressed Piezoresistive Beams

Measurements of Piezoelectric Coefficient d33 of Lead Zirconate Titanate Thin Films Using a Mini Force Hammer

Design of a Triaxial Piezoelectric Accelerometer

Development of a High-Performance Microaccelerometer With Position Independent Pure-Axial Stressed Piezoresistive Beams

Design & Fabrication of a MEMS Piezoresistive Accelerometer with Beam-Film Combined Structure

Analysis of Thin Film Piezoelectric Microaccelerometer Using Analytical and Finite Element Modeling

Design, Fabrication, and Characterization of a High-Performance Monolithic Triaxial Piezoresistive High-g Accelerometer

Development of a MEMS Piezoresistive High-g Accelerometer with a Cross-Center Block Structure and Reliable Electrode

Analysis and Design of a Novel Piezoresistive Accelerometer with Axially Stressed Self-Supporting Sensing Beams

A Two-Axis MEMS Piezoresistive In-Plane Accelerometer with Pure Axially Deformed Microbeams

Fabrication Technology and Characteristics Research of the Acceleration Sensor Based on Li-Doped ZnO Piezoelectric Thin Films

Design of a Beam-Membrane Piezoresistive Accelerometer Based on MEMS Technology

A Theoretical and Empirical Investigation of Design Characteristics in a Pb(Zr,Ti)O3-Based Piezoelectric Accelerometer

MEMS Accelerometer With Two Thin Film Piezoelectric Read-Out

High Sensitivity MEMS Accelerometer Using PZT-Based Four L-Shaped Beam Structure

A Paper-Based Piezoelectric Accelerometer