Abstract:A prediction model of the welding process of Ti-6Al-4V titanium alloy was established by using the finite element method, which was used to evaluate the phase composition, residual stress and deformation of the welded joints of Ti-6Al-4V sheets with different processes (including tungsten inert gas welding, TIG, and laser beam welding, LBW). The Ti-6Al-4V structures of TIG welding and LBW are widely used in marine engineering. In order to quantitatively study the effects of different welding processes (including TIG welding and LBW) on the microstructure evolution, macro residual stress and deformation of Ti6Al4V titanium alloy sheets during welding, a unified prediction model considering solid-state phase transformation was established based on the ABAQUS subroutine. In this paper, LBW and TIG welding experiments of 1.6 mm thick Ti-6Al-4V titanium alloy sheets were designed. The microstructure distribution of the welded joints observed in the experiment was consistent with the phase composition predicted by the model, and the hardness measurement experiment could also verify the phase composition and proportion. From the residual stress measured by experiment and the residual stress and deformation calculated by finite element simulation of LBW and TIG weldments, it is concluded that the effect of phase transformation on residual stress is mainly in the weld area, which has an effect on the distribution of tensile and compressive stress in the weld area. The overall deformation of the welded joint is mainly related to the welding process, and the phase transformation only affects the local volume change of the weld seam. Importantly, the phase composition and residual stress, which are scalar fields, calculated by the established model can be introduced into the numerical analysis of structural fracture failure as input influence factors.

Numerical Simulation of Residual Stress for Laser Welding of Ti-6Al-4V Alloy Considering Solid-State Phase Transformation

A Numerical Simulation Method Considering Solid Phase Transformation and the Experimental Verification of Ti6Al4V Titanium Alloy Sheet Welding Processes

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

ICONE19-43939 Phenomenological Evaluation of Laser-Irradiated Welding Processes with a Combined Use of Higher-Accuracy Experiments and Computational Science Methodologies : (5) Numerical Simulation of the Welding Processes with a Multi-Dimensional Multi-Physics Analysis Code SPLICE

Numerical Simulation for Full-Penetration Electron Beam Welding of Ti2AlNb Alloy

Development of Laser Welding Simulation Code with Advanced Numerical Models

Stress evolution mechanisms under different SSPT-related effects during laser welding

G010023 Numerical Simulation for Phenomenological Evaluation of Laser Welding Processes

A Multi-Phase Model for Transformation Plasticity Using Thermodynamics-Based Metallurgical Algorithm

Research on microstructure of Ti-6Al-4V titanium alloy by thermal simulation under water cooling

Establishment and Application of Material Models for Numerical Simulation of Welding Process

A Simulation Study on the Effect of Residual Stress on the Multi-Layer Selective Laser Melting Processes Considering Solid-State Phase Transformation

Numerical and experimental study of residual stress in multi-pass laser welded 5A06 alloy ultra-thick plate

A thermal–metallurgical model of laser beam welding simulation for carbon steels

Thermal Stress Field and Microstructure Evolution of Ti-6Al-4V Fabricated by Laser Engineered Net Shaping

Numerical simulation of residual stress and deformation on laser welding of "grooved-coat" structure

Microstructural evolution and numerical simulation of laser-welded Ti2AlNb joints under different heat inputs

A simulation and experiment study on phase transformations of Ti-6Al-4V in wire laser additive manufacturing

Numerical Investigations on Residual Stress in Laser Penetration Welding Process of Ultrafine-Grained Steel

The Numerical Simulation of Welding Residual Stress of Dissimilar Transparent Thermoplastics with MZA Powder Absorbent

Numerical and Experimental Analysis of Dissimilar Repair Welding Residual Stress in P91 Steel Considering Solid-State Phase Transformation