Abstract:Previous studies on laterally loaded piles in clay have mainly focused on flexible and rigid piles. Little attention has been paid to semi-rigid piles (whose pile–soil stiffness lies somewhere between those of rigid and flexible piles), which may behave as either flexible piles or rigid piles, depending on the change in soil stiffness during cycling. This study aims to understand the cyclic lateral response of a repeatedly loaded semi-rigid pile in soft clay and the failure mechanisms of the soil around the pile, through a series of centrifuge model tests and three-dimensional finite element analyses using an advanced hypoplastic clay model. Numerical parametric studies were also performed to investigate the evolution of soil flow mechanisms with increasing pile rigidity. It is revealed that the semi-rigid pile behaved as if it were a flexible pile (i.e., flexural deformation dominated) during the first few cycles, but tended to behave like a rigid pile (i.e., rotational movement prevailed) during subsequent cycles, which progressively softened the surrounding soil. As a result, the mechanisms of soil flow around the semi-rigid pile exhibited an intermediate behaviour combining the mechanisms of both flexible and rigid piles. Three distinctive mechanisms were identified: a wedge-type mechanism near the surface, a full-flow mechanism (within the transverse sections) near the middle of the pile, and a rotational soil flow mechanism (in the vertical symmetrical plane of the pile) near the lower half of the pile. By ignoring the rotational soil flow mechanism, which has a much lower resistance than the full-flow mechanism, the American Petroleum Institute code (published in 2007) underestimated the cyclic bending moment and the lateral pile displacement by 10% and 69%, respectively. Application of jet grouting around the semi-rigid pile at shallow depth significantly altered the soil flow mechanism (i.e., it was a solely wedge-type mechanism around the grouted zone).

Investigation of Piles Behavior under Lateral Cyclic Load

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Centrifuge Model Tests on Laterally Loaded Piles in Sand

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Model Test Study of Bearing Behavior of Small Prefabricated Piles in Soft Soil Area

Effect of Loading Rate on Lateral Pile-Soil Interaction in Sand Considering Partially Drained Condition

Soil-pile interaction on an instrumented pile under cyclic axial loads in sand

Analysis method for pile groups subjected to lateral and torsional loads

Cyclic Lateral Response and Failure Mechanisms of Semi-Rigid Pile in Soft Clay: Centrifuge Tests and Numerical Modelling

Experimental Investigation on a Single Stiff Pile Subjected to Long-Term Axial Cyclic Loading

Behavior Analysis of Laterally Loaded Single Pile under Large Deflection

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Model Test on Bearing Capacity and Accumulated Settlement of Single Pile Subjected to Axial Cyclic Loading

Nonlinear Analysis of Pile Groups Subjected to Combined Lateral and Torsional Loading

Large-scale Model Tests on High-Rise Platform Pile Groups under Cyclic Lateral Loads

Experimental Investigation Of Performance Of Axially Cyclic Loaded Piles

A Multi-Axial Bounding Surface P-Y Model with Application in Analyzing Pile Responses under Multi-Directional Lateral Cycling

Simulation of cyclic laterally-loaded piles in undrained clays accounting for soil small-strain characteristics

Behavior of Pile Group with Elevated Cap Subjected to Cyclic Lateral Loads