Abstract:Spiral-wound modules have been the most common configuration of packing flat-sheet membranes since the early development of polyamide (PA) membranes for water treatment applications. Conventional spiral-wound modules (SWMs) for desalination applications typically consist of several leaf sets, with each leaf set comprising feed spacers, membranes, and a permeate carrier (PC) wrapped around a permeate-collecting tube. The membrane area that can be packed into a given module diameter is limited by the overall leaf set thickness, restricting module productivity for a given membrane permeability. We describe here a novel industrial-scale method for successfully coating the polysulfone (PSf) ultrafiltration (UF) support layer directly onto a permeate carrier, instead of conventional non-woven fabric, as a precursor to the polyamide TFC coating, resulting in twofold benefits: (a) drastically simplifying the membrane fabrication process by eliminating the use of non-woven fabric and (b) increasing the throughput of each membrane module by facilitating the packing of a larger membrane area in a standard module housing. By combining the permeate carrier and membrane into a single sheet, the need for the non-woven support layer was eliminated, leading to a significantly reduced leaf set thickness, enabling a much larger membrane area to be packed in a given volume, leading to lower energy consumption per cubic meter of produced water. Molecular-weight cutoff (MWCO) values in the range of 36–96 kDa were found to be dependent on PC thickness and material. Nevertheless, the reinforced membranes were successfully fabricated with a ~9% reduction in membrane leaf thickness compared to a conventional membrane. Preliminary trials of coating a thin-film composite PA layer resulted in defect-free reverse osmosis (RO) membranes with a salt rejection of 94% and a flux of 40 L m−2 h−1 when tested against a 2000 mg/L NaCl feed solution at an operating pressure of 15 bar. Results from the testing of the 1812 and 2514 elements validated the novel concept and paved the way for further improvements towards full-scale RO membranes with the potential to be the next low-energy workhorse of the water industry.

Ultrathin Support-Free Membrane with High Water Flux for Forward Osmosis Desalination

Atomistic Simulations of Biofouling and Molecular Transfer of a Cross-linked Aromatic Polyamide Membrane for Desalination

Ultra-Selective Polyamide Membrane from Metal Organic Framework Assembly Regulated Interfacial Polymerization for Desalination and Water Reuse

Zwitterionic forward osmosis membrane with low structural parameter based on highly porous polyvinylidene fluoride substrate for desalination

Combing Three-Dimensional Water Channels and Ultra-Thin Skin Layer Enable High Flux and Stability of Loose Polyimide/sio2 Nanofiltration Membranes at Low Operating Pressure Via One Step In-Situ Modification

Improved performance of thin-film composite membrane with PVDF/PFSA substrate for forward osmosis process

Development and Industrial-Scale Fabrication of Next-Generation Low-Energy Membranes for Desalination

Polyamide Membrane Tailored by Codeposition of a UiO-66 Metal–Organic Framework Nanostructure-Based Interlayer for Forward Osmosis

Inositol Hexaphosphate Assisted Polyamide Thin-Film Composite Membrane with Ultrahigh Performance for Water Desalination and Dye Fraction

High performance forward osmosis membrane with ultrathin hydrophobic nanofibrous interlayer

Fabricating Ultrathin Polyamide Nanofiltration Membranes by Surface Negative Charge-Driven Assembly Strategy for Fast Desalination

Forward Osmosis Membranes with Unprecedented Water Flux

Facile polyamide microstructure adjustment of the composite reverse osmosis membrane assisted by PF127/SDS mixed micelles for improving seawater desalination performance

Fabrication and Characterization of 2-Aminophenol-4-sulfonic Acid-Integrated Polyamide Loose Nanofiltration Membrane

Selective-layer polysulfone membranes based on unfunctionalized and functionalized MoS2/polyamide nanocomposite for water desalination

High Performance Thin-Film Composite (tfc) Forward Osmosis (fo) Membrane Fabricated on Novel Hydrophilic Disulfonated Poly(Arylene Ether Sulfone) Multiblock Copolymer/Polysulfone Substrate

A PDA@ZIF-8-Incorporated PMIA TFN-FO Membrane for Seawater Desalination: Improving Water Flux and Anti-Fouling Performance

5-Sulfoisophthalic Acid Sodium Incorporated Polyamide Nanofiltration Membrane with Enhanced Separation Performance

Highly improved permeation property of thin-film-composite polyamide membrane for water desalination

Ultrathin Thin-Film Composite Polyamide Membranes Constructed on Hydrophilic Polyvinyl Alcohol Decorated Support Toward Enhanced Nanofiltration Performance.

PolyMOF Interlayers Modulated Interfacial Polymerization of Ultra-thin Nanofiltration Membranes with Efficient and Stable Desalination Performance