Abstract:Fibre metal laminates (FML) are layered materials consisting of both metal and reinforced composite layers. Due to numerous possibilities of configuration, constituent materials, etc., designing and testing such materials can be time- and cost-consuming. In addition to that, some parameters cannot be obtained directly from the experiment campaign. These problems are often overcome by using numerical simulation. In this article, the authors reviewed different approaches to finite element analysis of fibre metal laminates based on published articles and their own experiences. Many aspects of numerical modelling of FMLs can be similar to approaches used for classic laminates. However, in the case of fibre metal laminates, the interface between the metal and the composite layer is very relevant both in experimental and numerical regard. Approaches to modelling this interface have been widely discussed. Numerical simulations of FMLs are often complementary to experimental campaigns, so an experimental background is presented. Then, the software used in numerical analysis is discussed. In the next two chapters, both static and fatigue failure modelling are discussed including several key aspects like dimensionality of the model, approaches to the material model of constituents and holistic view of the material, level of homogenization, type of used finite elements, use of symmetry, and more. The static failure criteria used for both fibres and matrix are discussed along with different damage models for metal layers. In the chapter dedicated to adhesive interface composite—metal, different modelling strategies are discussed including cohesive element, cohesive surfaces, contact with damage formulation and usage of eXtended Finite Element Method. Also, different ways to assess the failure of this layer are described with particular attention to the Cohesive Zone Model with defined Traction–Separation Law. Furthermore, issues related to mixed-mode loading are presented. In the next chapter other aspects of numerical modelling are described like mesh sensitivity, friction, boundary conditions, steering, user-defined materials, and validation. The authors in this article try to evaluate the quality of the different approaches described based on literature review and own research.

Mechanical analysis and progressive failure prediction for fibre metal laminates using a 3D constitutive model

Micro Failure Analysis of Fiber Metal Laminates

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

A New Three-Dimensional Progressive Damage Model for Fiber-Reinforced Polymer Laminates and Its Applications to Large Open-Hole Panels

Characterization of progressive damage behaviour and failure mechanism of carbon fibre reinforced DP590 laminates

Progressive Failure Analysis of Carbon Fiber/epoxy Composite Laminates Using Continuum Damage Mechanics

Open-hole Tensile Progressive Damage and Failure Prediction of Carbon Fiber-Reinforced PEEK–titanium Laminates

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

Numerical simulation of pin-loaded joints of fiber metal laminate

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure

3D FEA Modelling of Laminated Composites in Bending and Their Failure Mechanisms

Residual tension behavior and damage evolution mechanisms of fiber metal laminates with various low-velocity impacted damage

Progressive Damage and Failure Modeling in Fiber-Reinforced Laminated Composites Containing a Hole

Progressive Damage Behaviour Analysis and Comparison with 2D/3D Hashin Failure Models on Carbon Fibre-Reinforced Aluminium Laminates

Constitutive Modelling of Laminated Fibre-Reinforced Composites

Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion

Three-dimensional progressive failure modeling of glass fiber reinforced thermoplastic composites for impact simulation

A Review on Finite-Element Simulation of Fibre Metal Laminates