Insights into corn straw gasification with K 2 CO 3 and CaO additives: From the aspect of micro, macro to mechanism
Qianqian Guo,Yanan Wang,Yiji Ding,Zehuang Zhang,Fan Yu,Yanjun Hu,Nan Zhou,Long Jiao
DOI: https://doi.org/10.1016/j.joei.2023.101430
IF: 6.47
2023-10-13
Journal of the Energy Institute
Abstract:This study provided a total study on the corn straw gasification with K 2 CO 3 and CaO additives from the aspect of micro, macro and mechanism. During the devolatilization process, K 2 CO 3 was beneficial to enhance the depolymerization and fragmentation of CS thus yielding more char, while CaO showed the inhibition. The CO and COOH cracking and reforming was promoted under the K 2 CO 3 to generate more CO 2 , while CaO can adsorb CO 2 to form CaCO 3 and then remained in the char. Moreover, K 2 CO 3 was beneficial for the decomposition lignin and hemicellulose to generate more CO and the thermal devolatilization of methoxyl groups to yield more CH 4 . In addition, K 2 CO 3 and CaO all can improve the C-C/C-O-O formation. When the K 2 CO 3 /CaO mixture was utilized, the co-existence of K 2 CO 3 and CaO exhibited a synergy on catalyzing the cracking and reforming of CO, C-C and C-O-C, resulting in a higher CO yield during devolatilization process. Moreover, K 2 CO 3 and CaO exhibited a synergy on CO 2 and char formation, thus improving the reaction between these two substance to form more CO duing the solid-gas reaction process. The CaO in char could also adsorb the CO 2 to form CaCO 3 following the CaO carbonation. Since this reaction was exothermic, the gasification process was enhanced and water gas shift reaction was driven to generate more CO 2 and H 2 formation. The K 2 CO 3 in char played a positive effect on the reaction between char and H 2 to yield more CH 4 . The synergy between K 2 CO 3 and CaO reached an optimum under the mixing ratio of 4:2. The generated bimetallic carbonate K 2 Ca(CO 3 ) 2 during devolatilization process was postulated to be the reason for the synergy. Under this condition, the highest LHV of gas products of 6.68 MJ/Nm 3 , lowest tar content of 3.69 g/Nm 3 and highest cold gas efficiency (CGE) of 86.49% were achieved.
energy & fuels